Ford Fiesta (2011 year). Manual — part 134
10.
Puddle weld 3 panel layer.
•
General Equipment: Metal Inert Gas (MIG)
Welding Equipment
E113419
11.
Resistance spot weld - Panel thickness 3
mm and greater!
General Equipment: Resistance Spotwelding
Equipment
•
G1133589en
501-29-
37
Side Panel Sheet Metal Repairs
501-29-
37
REMOVAL AND INSTALLATION
201
E113420
12.
General Equipment: Metal Inert Gas (MIG)
Welding Equipment
•
E113421
G1133589en
501-29-
38
Side Panel Sheet Metal Repairs
501-29-
38
REMOVAL AND INSTALLATION
201
13.
General Equipment: Resistance Spotwelding
Equipment
•
General Equipment: Metal Inert Gas (MIG)
Welding Equipment
E113422
14. • Rocker Panel Trim
Refer to: Front Seat
(501-10 Seating,
Removal and Installation).
Refer to: Rear Seat Cushion
(501-10 Seating,
Removal and Installation).
Refer to: Rear Seat Backrest
(501-10
Seating, Removal and Installation).
Refer to: B-Pillar Trim Panel - 5-Door
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
• Front and Rear Door
G1133589en
501-29-
39
Side Panel Sheet Metal Repairs
501-29-
39
REMOVAL AND INSTALLATION
201
B-Pillar and Reinforcement — 5-Door
Materials
Specification
Name
WSS-M11P57-A5
Windshield Adhesive Kit
General Equipment
Air Body Saw
General Equipment
Hot Air Gun
Metal Inert Gas (MIG) Welding Equipment
Resistance Spotwelding Equipment
Spot weld drill Bit
Removal
NOTE: Equipment:
Measurement and alignment angle system
1.
WARNING: High-strength steel (Usibor
1500)
• A suitably powerful resistance spot welding
device with inverter technology must be
used for this repair. Observe the
manufacturer's welding equipment
instructions and sub-section 501-25.
• The B-pillar reinforcement is made of
high-strength steel plate (Usibor 1500).
• A partial replacement of the B-pillar
reinforcement is not permissible. The
required continuous MIG weld seam in the
area of the cut causes structural changes
which result in significant loss of strength in
the B-pillar reinforcement.
• Due to its strength, the B-pillar reinforcement
can not always be worked on with
conventional body tools.
• Additional preparations are required for MIG
puddle welding.
Refer to: Tools and Equipment for Body Repairs
(501-25 Body Repairs - General Information,
Description and Operation).
2.
Rocker Panel Trim
Refer to: B-Pillar Trim Panel - 5-Door
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
Refer to: Front Seat
(501-10 Seating,
Removal and Installation).
Refer to: Rear Seat Cushion
(501-10 Seating,
Removal and Installation).
Refer to: Rear Seat Backrest
(501-10
Seating, Removal and Installation).
•
• Front and Rear Door
• Reposition the carpeting and the wiring
harness away from the working area.
3.
General Equipment: Air Body Saw
General Equipment: Spot weld drill Bit
•
G1133590en
501-29-
40
Side Panel Sheet Metal Repairs
501-29-
40
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст