Ford Fiesta (2011 year). Manual — part 41
Vehicles with manual dimming interior mirror
6.
E103429
1
2
Vehicles with autolamps and rain sensor
7.
E103425
8.
E103426
9.
E103427
1
2
G1079946en
501-11-
46
Glass, Frames and Mechanisms
501-11-
46
REMOVAL AND INSTALLATION
201
10.
E103428
All vehicles
11.
Use a suitable awl to thread the cutting wire.
General Equipment: Direct Glazing
Removal/Replacement Equipment
E113701
12.
CAUTION: If the original window glass
is to be installed, take care not to
damage the electrical connectors and
the weatherstrip (if equipped).
Use a suitable brace to prevent trim damages.
General Equipment: Direct Glazing
Removal/Replacement Equipment
G1079946en
501-11-
47
Glass, Frames and Mechanisms
501-11-
47
REMOVAL AND INSTALLATION
201
E113702
x2
13.
E73226
Installation
1.
NOTE: Minimum 1 mm bead thickness.
General Equipment: Knife
1.
2. NOTE: Make sure that the mating faces are
clean and free of foreign material.
3. NOTE: Touching the adhesive surface will
impair rebonding.
Prepare the windshield glass, windshield
glass flange and trimmed PU adhesive in
accordance with the instructions supplied
with the glass adhesive kit.
E114059
1
2
G1079946en
501-11-
48
Glass, Frames and Mechanisms
501-11-
48
REMOVAL AND INSTALLATION
201
2. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
E114060
3. NOTE: Touching the adhesive surface will
impair rebonding.
NOTE: Make sure that the mating faces are
clean and free of foreign material.
E73226
4. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
E114061
5. NOTE: Discard the first 100 mm of adhesive as
this may have a reduced working time.
G1079946en
501-11-
49
Glass, Frames and Mechanisms
501-11-
49
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст