Ford Fiesta (2011 year). Manual — part 33
Liftgate Window Glass
Materials
Specification
Name
WSS-M11P57-A5
Windshield Adhesive Kit
General Equipment
Adhesive Tape
General Equipment
Direct Glazing Removal/Replacement Equipment
Hot Air Gun
Knife
Laminated Card
Removal
1.
Refer to: Window Glass Health and Safety
Description and Operation).
2. Remove the polyurethane (PU) adhesive cap
and heat the PU adhesive for a minimum of 30
minutes.
Material: Windshield Adhesive Kit
(WSS-M11P57-A5)
TIE0022871
3.
Refer to: Rear Spoiler
(501-08 Exterior Trim and
Ornamentation, Removal and Installation).
Wipers and Washers, Removal and
Installation).
4. On both sides.
E107936
5.
CAUTION: Make sure that the cutting
blades are changed where the cutting
depth changes.
Use laminated card to prevent paint damages.
General Equipment: Direct Glazing
Removal/Replacement Equipment
General Equipment: Laminated Card
E107840
x2
Installation
1. NOTE: Minimum 1 mm bead thickness.
NOTE: Make sure that the mating faces are
clean and free of foreign material.
G1079941en
501-11-
14
Glass, Frames and Mechanisms
501-11-
14
REMOVAL AND INSTALLATION
Precautions
(100-00 General Information,
Refer to: Rear Window Wiper Motor
(501-16
201
NOTE: Touching the adhesive surface will
impair rebonding.
General Equipment: Knife
General Equipment: Hot Air Gun
E107842
2. NOTE: This step is only necessary if the original
component is to be reused.
NOTE: Minimum 1 mm bead thickness.
NOTE: Make sure that the mating faces are
clean and free of foreign material.
NOTE: Touching the adhesive surface will
impair rebonding.
General Equipment: Knife
General Equipment: Hot Air Gun
E107844
3. NOTE: Discard the first 100 mm of adhesive as
this may have a reduced working time.
NOTE: Make sure that any breakage in the
continuous bead of adhesive is overlapped by
20 mm.
General Equipment: Direct Glazing
Removal/Replacement Equipment
Material: Windshield Adhesive Kit
(WSS-M11P57-A5)
E107843
8 - 10mm
4.
CAUTION: During the curing time of the
polyurethane (PU) adhesive, the door
windows must be left open.
General Equipment: Adhesive Tape
E107841
x2
G1079941en
501-11-
15
Glass, Frames and Mechanisms
501-11-
15
REMOVAL AND INSTALLATION
201
5. On both sides.
E107936
6.
Refer to: Rear Window Wiper Motor
(501-16
Wipers and Washers, Removal and
Installation).
Refer to: Rear Spoiler
(501-08 Exterior Trim and
Ornamentation, Removal and Installation).
G1079941en
501-11-
16
Glass, Frames and Mechanisms
501-11-
16
REMOVAL AND INSTALLATION
201
Rear Quarter Window Glass
Materials
Specification
Name
WSK-M11P57-A3 /
7U7J-T03863-AA
Windscreen Adhesive
Kit - 1 Component
WSS-M11P57-A5
Windshield Adhesive Kit
General Equipment
Adhesive Tape
Direct Glazing Removal/Replacement Equipment
Knife
Laminated Card
Removal
1.
CAUTION:
Refer to: Window Glass Health and Safety
Precautions
(100-00 General Information,
Description and Operation).
2.
Material: Windshield Adhesive Kit
(WSS-M11P57-A5)
1.
2. Remove the polyurethane (PU) adhesive cap
and heat the 2K-PU adhesive for a minimum
of 30 minutes.
General Equipment: Direct Glazing
Removal/Replacement Equipment
3. Repairs under warranty:
Material: Windscreen Adhesive Kit - 1
Component (WSK-M11P57-A3 /
7U7J-T03863-AA)
TIE0022871
3-door
3. General Equipment: Adhesive Tape
G1226512en
501-11-
17
Glass, Frames and Mechanisms
501-11-
17
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст