Ford C-MAX Hybrid (2018 year). Manual — part 22

AUDIBLE WARNINGS AND
INDICATORS

Key in Ignition Warning Chime

(If

Equipped)

Sounds when you open the driver's door
and you have left the key in the ignition.

Engine On Warning Chime

A warning chime will sound when any door
is opened if the vehicle exceeds a relatively
low speed.

Keyless Warning Alert

(If Equipped)

Sounds the horn twice when you exit the
vehicle and the keyless vehicle is in RUN,
indicating the vehicle is still on.

Headlamps On Warning Chime

Sounds when you remove the key from the
ignition and open the driver's door and you
have left the headlamps or parking lamps
on.

Parking Brake On Warning Chime

Sounds when you have left the parking
brake on and drive your vehicle. If the
warning chime remains on after you have
released the parking brake, have the
system checked by your authorized dealer
immediately.

Automatic Transmission Warning
Chime

Sounds when you have not moved the
transmission selector lever to position P.
A message will be shown in the display.

GENERAL INFORMATION

WARNING

Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that

you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any hand-held device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.

Various systems on your vehicle can be
controlled using the information display
controls on the steering wheel.
Corresponding information is displayed in
the information display.

Left Information Display Controls

•

Press the up and down arrow buttons
to scroll through and highlight the
options within a menu.

•

Press the right arrow button to enter a
sub-menu.

•

Press the left arrow button to exit a
menu.

•

Press and hold the left arrow button at
any time to return to the main menu
display (escape button).

•

Press the OK button to choose and
confirm settings or messages.

Main menu

From the main menu bar on the left side
of the information display, you can choose
from the following categories:

Display/Trip

Information

Settings

Scroll up or down to highlight one of the
categories, and then press the right arrow
key or OK to enter into that category. Press
the left arrow key as needed to exit back
to the main menu.

Display/Trip

Use the up or down arrow
buttons to choose between the
following display options.

Note: The cluster will remember the menu
level 2 state when you change the key state
from the RUN to the OFF position.

Display/Trip

Menu level 5

Menu level 4

Menu level 3

Menu level 2

—

—

Help

Engage
(Split Power + Avg
Fuel Economy +
Battery Gauge + Fuel
Gauge)

—

—

Help

Empower
(Power (with engine
on/off threshold) +
Avg Fuel Economy +
Battery Gauge + Fuel
Gauge)

Vehicle Range

Vehicle Range

Change MyView

MyView
(MyView + Battery
Gauge + Fuel Gauge)

Average Fuel

Average Fuel

Instantaneous Fuel

Split Power

Coolant Temp.

Power + Threshold

Accessory Power

Tach rpm x1000

Trip 1

Accessory Power

Trip 2

Trip 1

Fuel History

Trip 2

Coach

Fuel History

Blank

Coach

—

Blank

—

—

Help

—

—

Help

Trip 1: Trip Data +
Battery Gauge + Fuel
Gauge

Trip 2: Trip Data +
Battery Gauge + Fuel
Gauge

Engage

Engage provides separate gauges for
engine power and high voltage battery
power in kilowatts (kW). The engine power
gauge fill is white and the high voltage
battery power gauge fill is blue. You can
also see an instantaneous fuel economy
gauge. When your vehicle is operating on
battery power only, you will see EV
displayed and the gauges will appear in
blue.

Empower

Empower provides a power demand gauge
in kilowatts (kW) which includes an engine
on or off threshold.

•

When your vehicle is operating with
battery power only (below the
threshold), you will see EV displayed
and the gauge fill is blue.

•

When your vehicle is operating with
both the engine and the high voltage
battery providing power the gauge fill
is white.

•

When power demand surpasses the
amber indicator, this level of demand
and associated fuel economy displays
in amber.

•

When the engine is on, reducing power
demand to less than the threshold will
allow the engine to turn off.

You can also see an instantaneous fuel
economy gauge.

Note: You can reset your average fuel
economy by pressing and holding the OK
button on the left hand steering wheel
controls.

MyView

You can choose what to display in this
view. Selecting Change MyView in the
options menu allows you to scroll through
two columns of content choices.

•

Press the up or down arrow to view
content.

•

Press OK to save your selected
content.

•

You must select content in both
columns before you can save your new
MyView.

Unique content available in MyView:
•

Accessory Power— Indicates electrical
power demands from your vehicle’s
accessory systems. Accessories use
power but do not contribute to
propelling your vehicle. The gauge
separately displays power demand in
kilowatts (kW) for climate and other
accessories. Climate includes the
power being used by high voltage
climate control components such as
the electric A/C compressor. Other
includes all power being used by the
low voltage accessories (cabin fans,
headlights, heated seats, etc.).

•

Coolant Temp – Indicates engine
coolant temperature. At normal
operating temperature, the level
indicator will be white and will be in the
normal range (between H and C). If the
engine coolant temperature exceeds
the normal range, the level indicator
will change to red to indicate that the
engine is overheating. Stop your vehicle
as soon as safely possible, turn your
vehicle off and let the engine cool.

•

Tach rpm x 1000 — When the gasoline
engine is running, the tachometer
gauge displays the engine speed in
revolutions per minute (RPM). When
your vehicle is operating on battery
power only with the engine off, EV
displays and the tachometer is greyed
out.

Note: The trip data, and average fuel
economy cannot be reset in MyView.