Ford C-MAX Hybrid (2018 year). Manual — part 31

3-button remote

5-button remote

1.

Hold the key next to the steering
column as shown.

2. With the key in this position, you can

use the start button to switch the
ignition on and start your vehicle.

Fast Restart

The fast restart feature allows you to
restart the vehicle within 20 seconds of
switching it off, even if a valid key is not
present.

Within 20 seconds of switching the vehicle
off, press the brake pedal and press the
button. After 20 seconds have expired, you
can no longer restart the vehicle without
the key present inside your vehicle.

Once the vehicle has started, it remains
running until you press the button, even if
the system does not detect a valid key. If
you open and close a door while the vehicle
is running, the system searches for a valid
key. You cannot restart the vehicle if the
system does not detect a valid key within
20 seconds.

Vehicles with an Ignition Key

Note: Do not touch the accelerator pedal.

1.

Fully press the brake pedal. If your
vehicle is equipped with a manual
transmission, fully press the clutch
pedal.

2. Turn the key to position III to start the

engine.

Switching Off the Vehicle When It
Is Stationary

Vehicles with Keyless Start

1.

Move the transmission selector lever
to position P.

2. Press the button once.

3. Apply the parking brake.

Note: This switches off the ignition, all
electrical circuits, warning lamps and
indicators.

Vehicles with an Ignition Key

1.

For vehicles with automatic
transmission, shift into park (P). For
vehicles with manual transmission,
shift into neutral (N).

2. Turn the key to position 0.

3. Apply the parking brake.

Switching Off the Vehicle When It
Is Moving

WARNING

Switching off the engine when your
vehicle is still moving results in a
significant decrease in braking

assistance. Higher effort is required to
apply the brakes and to stop your vehicle.
A significant decrease in steering
assistance could also occur. The steering
does not lock, but higher effort could be
required to steer your vehicle. When you
switch the ignition off, some electrical
circuits, for example airbags, also turn off.
If you unintentionally switch the ignition
off, shift into neutral (N) and restart the
engine.

Vehicles with Keyless Start

1.

Move the transmission selector lever
to position N and use the brakes to
bring your vehicle to a safe stop.

2. When your vehicle has stopped, move

the transmission selector lever to
position P.

3. Press and hold the button for one

second, or press it three times within
two seconds.

4. Apply the parking brake.

Vehicles with an Ignition Key

1.

Shift into neutral and use the brakes to
bring your vehicle to a safe stop.

2. When your vehicle has stopped, shift

into park (P) or neutral (N) and switch
the ignition off.

3. Apply the parking brake.

Guarding Against Exhaust Fumes

WARNING

Exhaust leaks may result in entry of
harmful and potentially lethal fumes
into the passenger compartment. If

you smell exhaust fumes inside your
vehicle, have your vehicle inspected
immediately. Do not drive if you smell
exhaust fumes.

Important Ventilating Information

If you stop your vehicle and leave it idling
for long periods, we recommend that you
do one of the following:

•

Open the windows at least 1 in
(2.5 cm).

•

Set your climate control to outside air.

ENGINE BLOCK HEATER

(If

Equipped)

WARNINGS

Failure to follow engine block heater
instructions could result in property
damage or serious personal injury.

Do not use your heater with
ungrounded electrical systems or
two-pronged adapters. There is a risk

of electrical shock.

Do not fully close the hood, or allow
it to drop under its own weight when
using the engine block heater. This

could damage the power cable and may
cause an electrical short resulting in fire,
injury and property damage.

Note: The heater is most effective when
outdoor temperatures are below 0°F
(-18°C).

The heater acts as a starting aid by
warming the engine coolant. This allows
the climate control system to respond
quickly. The equipment includes a heater
element (installed in the engine block) and
a wire harness. You can connect the
system to a grounded 120-volt AC
electrical source.

We recommend that you do the following
for a safe and correct operation:
•

Use a 16-gauge outdoor extension cord
that is product certified by
Underwriter’s Laboratory (UL) or
Canadian Standards Association
(CSA). This extension cord must be
suitable for use outdoors, in cold
temperatures, and be clearly marked
Suitable for Use with Outdoor
Appliances. Do not use an indoor
extension cord outdoors. This could
result in an electric shock or become a
fire hazard.

•

Use as short an extension cord as
possible.

•

Do not use multiple extension cords.

•

Make sure that when in operation, the
extension cord plug and heater cord
plug connections are free and clear of
water. This could cause an electric
shock or fire.

•

Make sure your vehicle is parked in a
clean area, clear of combustibles.

•

Make sure the heater, heater cord and
extension cord are firmly connected.

•

Check for heat anywhere in the
electrical hookup once the system has
been operating for approximately 30
minutes.

•

Make sure the system is unplugged and
properly stowed before starting and
driving your vehicle. Make sure the
protective cover seals the prongs of the
block heater cord plug when not in use.

•

Make sure the heater system is
checked for proper operation before
winter.

Using the Engine Block Heater

Make sure the receptacle terminals are
clean and dry prior to use. Clean them with
a dry cloth if necessary.

The heater uses 0.4 to 1.0 kilowatt-hours
of energy per hour of use. The system does
not have a thermostat. It achieves
maximum temperature after
approximately three hours of operation.
Using the heater longer than three hours
does not improve system performance and
unnecessarily uses electricity.

AUTOMATIC ENGINE
SHUTDOWN

For vehicles with a keyless ignition, this
automatically shuts down your vehicle if
it has been idling for an extended period.
The ignition also turns off to save battery
power. Before your vehicle shuts down, a
message appears in the information
display showing a timer counting down. If
you do not intervene within 30 seconds,
your vehicle shuts down. Start your vehicle
as normal.

Automatic Engine Shutdown Override

Note: You cannot permanently switch off
the automatic shutdown. When you switch
it off temporarily, it turns on at the next
ignition cycle.

You can stop the shutdown, or reset the
timer, at any point before the 30-second
countdown has expired by doing any of the
following:
•

Interacting with your vehicle, for
example pressing the brake or
accelerator pedal.

•

Disabling the shutdown using the
information display. See Information
Displays (page 92).

•

Pressing the OK or RESET button
during the 30-second countdown.