Ford E-250 (2009 year). Manual — part 20
ENGINE DATA
Engine
1
4.6L V8 engine 5.4L V8 engine 6.8L V10 engine
Cubic inches
281
330
415
Required fuel
87 octane or
(E-85)
2
87 octane
87 octane
Firing order
1-3-7-2-6-5-4-8
1-3-7-2-6-5-4-8
1-6-5-10-2-7-3-8-4-9
Ignition system Coil on plug
Coil on plug
Coil on plug
Spark plug gap
0.052–0.056 inch
(1.32–1.42mm)
0.051–0.057 inch
(1.29–1.45mm)
0.052–0.056 inch
(1.32–1.42mm)
Compression
ratio
9.4:1
9.0:1
9.0:1
1
Refer to the 6.0 and 6.4 Liter Power Stroke Direct Injection Turbo
2
4.6L V8 FFV engines only.
Engine drivebelt routing
• 4.6L V8, 5.4L V8 and 6.8L V10 engines without A/C
Maintenance and Specifications
309
• 4.6L V8, 5.4L V8 and 6.8L V10 engines with A/C
IDENTIFYING YOUR VEHICLE
Safety Compliance Certification Label
(complete Ford built vehicles)
The National Highway Traffic Safety Administration Regulations require
that a Safety Compliance Certification Label be affixed to a vehicle and
prescribe where the Safety Compliance Certification Label may be
located. The Safety Compliance Certification Label is located on the
structure (B-Pillar) by the trailing edge of the driver’s door or the edge
of the driver’s door.
Maintenance and Specifications
310
Vehicle identification number (VIN)
The VIN is located on the driver side instrument panel or on the
certification label. It contains the following information:
1. World manufacturer identifier
2. Brake system / Gross Vehicle
Weight Rating (GVWR) / Restraint
System
3. Vehicle line, series, body type
4. Engine type
5. Check digit
6. Model year
7. Assembly plant
8. Production sequence number
Certification label for incomplete vehicles
On completed derivations of incomplete vehicles, the certification label is
affixed at a location determined by a subsequent stage manufacturer of
the completed vehicle. In these cases the completed vehicle is
manufactured in two or more stages by two or more separate
manufacturers.
Maintenance and Specifications
311
TRANSMISSION CODE DESIGNATIONS
You can find a transmission code on the Safety Compliance Certification
Label. The following table tells you which transmission each code
represents.
Description
Code
Four-speed automatic overdrive (4R75E)
Q
Five-speed automatic TorqShift with Tow/Haul
T
Five-speed automatic 5R110W-Hi/Torque
B
Maintenance and Specifications
312
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст