Ford Fusion Hybrid / Fusion Energi (2018 year). Manual — part 43

GENERAL INFORMATION

Note: Occasional brake noise is normal. If
a metal-to-metal, continuous grinding or
continuous squeal sound is present, the
brake linings may be worn-out and an
authorized dealer should check them. If the
vehicle has continuous vibration or shudder
in the steering wheel while braking, an
authorized dealer should check your vehicle.

Note: Brake dust may accumulate on the
wheels, even under normal driving
conditions. Some dust is inevitable as the
brakes wear and does not contribute to
brake noise. See Cleaning the Wheels
(page 274).

E138644

See Warning Lamps and
Indicators (page 92).

Wet brakes result in reduced braking
efficiency. Gently press the brake pedal a
few times when driving from a car wash or
standing water to dry the brakes.

Brake Over Accelerator

In the event the accelerator pedal
becomes stuck or entrapped, apply steady
and firm pressure to the brake pedal to
slow the vehicle and reduce engine power.
If you experience this condition, apply the
brakes and bring your vehicle to a safe
stop. Switch the engine off, move the
transmission to park (P) and apply the
parking brake. Inspect the accelerator
pedal and the area around it for any items
or debris that may be obstructing its
movement. If none are found and the
condition persists, have your vehicle towed
to the nearest authorized dealer.

Emergency Brake Assist

Emergency brake assist detects when you
brake heavily by measuring the rate at
which you press the brake pedal. It
provides maximum braking efficiency as
long as you press the pedal. Emergency
brake assist can reduce stopping distances
in critical situations.

Anti-lock Brake System

This system helps you maintain steering
control during emergency stops by keeping
the brakes from locking.

This lamp momentarily
illuminates when you switch the
ignition on. If the light does not

illuminate during start up, remains on or
flashes, the anti-lock braking system may
be disabled. Have the system checked by
an authorized dealer. If the anti-lock brake
system is disabled, normal braking is still
effective.

E138644

If the brake warning lamp
illuminates with the parking
brake released, have your brake

system serviced immediately.

HINTS ON DRIVING WITH
ANTI-LOCK BRAKES

The anti-lock braking system does not
eliminate the risks when:
•

You drive too closely to the vehicle in
front of you.

•

Your vehicle is hydroplaning.

•

You take corners too fast.

•

The road surface is poor.

Note: If the system activates, the brake
pedal may pulse and may travel further.
Maintain pressure on the brake pedal. You
may also hear a noise from the system. This
is normal.

ELECTRIC PARKING BRAKE

The electric parking brake replaces the
conventional handbrake. The operating
switch is in the center console.

WARNINGS

Always set the parking brake and
leave your vehicle with the
transmission in park (P).

If your vehicle has a manual
transmission, shift into first or reverse
gear. If your vehicle has an automatic

transmission, shift into park (P).

Note: When you apply the electric parking
brake in certain conditions, for example on
a steep hill, the electric parking brake may
reapply the brakes within three to ten
minutes.

Note: You may notice various noises when
you apply and release the electric parking
brake. This is normal and no cause for
concern.

Parking On a Hill (Vehicles With a
Manual Transmission)

If you park your vehicle facing uphill, move
the transmission to first gear (1) and turn
the steering wheel away from the curb. If
you park your vehicle facing downhill, move
the transmission to reverse (R) and turn
the steering wheel toward the curb.

Applying the Electric Parking
brake

WARNINGS

The brake system warning lamp will
flash when applying the electric
parking brake. If the brake system

warning lamp continues to flash there
could be a problem with your electric
parking brake. Have your vehicle checked
as soon as possible.

WARNINGS

Applying the electric parking brake
while moving will result in the
engagement of the anti-lock braking

system. Do not use the electric parking
brake system when the vehicle is moving
unless the normal brake system is unable
to stop the vehicle.

With the exception of emergency
conditions (for example, the brake
pedal is broken or is blocked), do not

apply the electric parking brake while the
vehicle is moving. On bends, or poor road
surfaces or weather conditions, emergency
braking can cause the vehicle to skid out
of control or off the road.

Note: The brake system warning lamp
illuminates for ten seconds if you switch the
ignition off after you apply the electric
parking brake, or you apply the electric
parking brake after you switch the ignition
off.

Note: The electric parking brake will not
automatically apply. You must apply the
electric parking brake using the electric
parking brake switch.

E227395

Pull the switch up to apply the electric
parking brake.

The brake system warning lamp flashes
for about two seconds and then
illuminates to confirm that you have
applied the electric parking brake. See
Information Displays (page 97).

If you apply the electric parking brake when
your vehicle is moving, the brake system
warning lamp illuminates and a warning
chime sounds. See Information Displays
(page 97).

If your vehicle speed is above 4 mph
(6 km/h), the braking force is applied as
long as you pull the switch. Releasing or
pressing the switch or pressing the
accelerator pedal stops the braking force.

Releasing the Electric Parking
Brake

You can release the electric parking brake
either manually by pressing the switch or
automatically.

Manual release

WARNING

If the brake system warning light
remains illuminated or flashes for
more than four seconds after you

have released the parking brake, there
could be a problem with your braking
system. Have your vehicle checked as soon
as possible.

E227515

You can manually release the electric
parking brake by:

1.

Switching the ignition on.

2. Pressing the brake pedal.

3. Pressing the electric parking brake

switch.

When the electric parking brake is released,
the brake system warning lamp turns off.

Automatic release - drive away release

Your vehicle automatically releases the
parking brake if all of the following
conditions exist:
•

You close the driver door (automatic
transmission only).

•

You press the accelerator pedal and
release the clutch pedal.

•

There are no faults detected in the
parking brake system.

Note: If the electric parking brake warning
lamp stays illuminated, the electric parking
brake will not automatically release. You
must release the electric parking brake using
the electric parking brake switch.

Note: On manual transmission vehicles,
when you release the clutch pedal and press
the accelerator pedal, the electric parking
brake releases automatically.

Note: On manual transmission vehicles,
you must fully press the clutch pedal before
the drive away release feature operates.
Drive as normal using the accelerator and
clutch pedals and the electric parking brake
will be automatically released.

The brake system warning lamp will go off
to confirm that the electric parking brake
has been released.

Note: The electric parking brake drive away
release makes starting on a hill easier. This
feature releases the parking brake
automatically when the vehicle has
sufficient drive force to move up the hill.

Driving with a Trailer

Depending on the slope and the weight of
the trailer, your vehicle and trailer may roll
backwards slightly when you start on a
slope.

To prevent this from happening, do the
following:

1.

Pull the switch up and hold it in this
position.

2. Drive your vehicle, then release the

switch when you notice that the engine
has developed sufficient driving force.

Battery With No Charge

WARNING

You will not be able to apply or
release the electric parking brake if
the battery is low or has no charge.

If the battery is low or has no charge, use
jumper cables and a booster battery.

HILL START ASSIST

WARNINGS

The system does not replace the
parking brake. When you leave your
vehicle, always apply the parking

brake and shift the transmission into park
(P) for automatic transmission or first gear
for manual transmission.

You must remain in your vehicle
when the system turns on. At all
times, you are responsible for

controlling your vehicle, supervising the
system and intervening, if required. Failure
to take care may result in the loss of
control of your vehicle, serious personal
injury or death.

WARNINGS

The system will turn off if a
malfunction is apparent or if you rev
the engine excessively. Failure to

take care may result in the loss of control
of your vehicle, serious personal injury or
death.

The system makes it easier to pull away
when your vehicle is on a slope without the
need to use the parking brake.

When the system is active, your vehicle will
remain stationary on the slope for two to
three seconds after you release the brake
pedal. This allows you time to move your
foot from the brake to the accelerator
pedal. The brakes release automatically
when the engine has sufficient torque to
prevent your vehicle from rolling down the
grade. This is an advantage when pulling
away on a slope, for example from a car
park ramp, traffic lights or when reversing
uphill into a parking space.

The system will activate automatically on
any slope that will cause significant vehicle
rollback.

Note: The system only functions when you
bring your vehicle to a complete standstill
with the vehicle in an uphill gear.

Note: There is no warning lamp to indicate
the system is either on or off.

Using Hill Start Assist

1.

Bring your vehicle to a complete
standstill. Keep the brake pedal
pressed.

2. If the sensors detect that your vehicle

is on a slope, the system activates
automatically.