Ford Fusion Hybrid / Fusion Energi (2018 year). Manual — part 27

Action

Message

The system has disabled the door switches.

Switches Inhibited

Security Mode

There is a system malfunction with the child locks. Contact
an authorized dealer as soon as possible.

Child Lock Malfunction

Service Required

The factory keypad code displays in the information display
after system resets the keypad.

Factory Keypad Code {X

X X X X}

Driver Alert

Action

Message

Stop and rest as soon as it is safe to do so.

Driver Alert Warning Rest

Now

Take a rest soon.

Driver Alert Warning Rest

Suggested

Fuel

Action

Message

An early reminder of a low fuel condition.

Fuel Level Low

The fuel fill inlet may not be properly closed.

Check Fuel Fill Inlet

EV functionality is disabled and the engine is running to

maintain fuel freshness. See Fuel Quality (page 153).

Fuel Freshness Engine

may run to maintain fuel

freshness

Wait for up to 15 seconds while the fuel system depressurizes.

Fuel Door Opening

The fuel system has finished depressurizing and you can begin
to refuel.

Fuel Door Open

A reminder to close the fuel door.

Close Fuel Door

There is an error in attempting to refill your vehicle.

Refuel Error See Manual

Hill Start Assist

Action

Message

Hill start assist is not available. Contact an authorized dealer.
See Hill Start Assist (page 178).

Hill Start Assist Not

Available

Keys and Intelligent Access

Action

Message

A reminder to press the brake while starting your vehicle.

To START Press Brake

The system does not detect a key in your vehicle. See Keyless
Starting (page 141).

No Key Detected

You pressed the start/stop button to switch off the engine
and your vehicle does not detect your intelligent access key
inside your vehicle.

Restart Now or Key is

Needed

Your vehicle is in the run ignition state.

Accessory Power is

Active

There is a problem with your vehicle’s starting system. See
an authorized dealer for service.

Starting System Fault

You have successfully programmed an intelligent access key
to the system.

Key Program Successful

You have failed to program an intelligent access key to the
system.

Key Program Failure

You have programmed the maximum number of keys to the
system.

Max Number of Keys

Learned

You have not programmed enough keys to the system.

Not Enough Keys

Learned

The key battery is low. Change the battery as soon as possible.

Key Battery Low Replace

Soon

An attempt is made to program a spare key using two existing
MyKeys.

Could Not Program

Integrated Key

Informs you that upon exiting your vehicle that the vehicle is
still on.

Vehicle is ON

Lane Keeping System

Action

Message

The system has malfunctioned. Contact an authorized dealer
as soon as possible.

Lane Keeping Sys.

Malfunction Service

Required

The system has detected a condition that has caused the
system to be temporarily unavailable.

Front Camera Tempor-

arily Not Available

The system has detected a condition that requires you to
clean the windshield in order for it to operate properly.

Front Camera Low Visib-

ility Clean Screen

The system has malfunctioned. Contact an authorized dealer
as soon as possible.

Front Camera Malfunc-

tion Service Required

The system requests the driver to keep their hands on the
steering wheel.

Keep Hands on Steering

Wheel

Maintenance

Action

Message

Stop your vehicle as soon as safely possible and turn off the
engine. Check the oil level. If the warning stays on or continues
to come on with your engine running, contact an authorized
dealer as soon as possible.

Low Engine Oil Pressure

The engine oil life remaining is 10% or less.

Change Engine Oil Soon

The oil life left is at 0%.

Oil Change Required

The brake fluid level is low, inspected the brake system
immediately. See Brake Fluid Check (page 261).

Brake Fluid Level Low

The brake system needs servicing. Stop your vehicle in a safe
place. Contact an authorized dealer.

Check Brake System

The engine coolant temperature is excessively high. See
Engine Coolant Check (page 256).

Engine Coolant Over

Temperature

The motor electronics are overheating. Stop your vehicle as
soon as safely possible, turn off your vehicle and let it cool. If
the warning stays on or continues to come on, contact an
authorized dealer as soon as possible.

Motor Coolant Over

Temperature

The engine has reduced power to help reduce high engine
temperature.

Power Reduced to

Lower Engine Temp

Action

Message

The kit needs service. See an authorized dealer.

Service Tire Mobility Kit

Your vehicle is still in Transport or Factory mode. This may
not allow some features to operate properly. See an author-
ized dealer.

Transport / Factory

Mode

The powertrain needs service due to a powertrain malfunction.

See Manual

EV functionality is disabled and the engine is running to
maintain oil quality. See Plug-In Hybrid Vehicle Operation
(page 148).

Engine ON Due to Low
Use Normal Operation

MyKey

Action

Message

You cannot program a MyKey.

MyKey not Created

MyKey is active.

MyKey Active Drive

Safely

When switching on your vehicle and MyKey is in use, displays
that the MyKey speed limit is on.

Speed Limited to XX

MPH/km/h

MyKey is in use and the MyKey speed limit is on and the vehicle
speed is approaching 80 mph (130 km/h).

Near Vehicle Top Speed

You have reached the speed limit set for your MyKey.

Vehicle at Top Speed of

MyKey Setting

You have an active MyKey with a programmed set speed limit.

Check Speed Drive

Safely

Belt-Minder turns on with a MyKey in use.

Buckle Up to Unmute

Audio

With a MyKey in use, AdvanceTrac turns on.

AdvanceTrac On -

MyKey Setting

With a MyKey in use, traction control turns on.

Traction Control On -

MyKey Setting

With a MyKey in use, park aid is always on.

MyKey Park Aid Cannot

be Deactivated

With a MyKey in use, lane keeping alert turns on.

Lane Keeping Alert On

MyKey Setting