Ford Edge (2018 year). Manual — part 35

•

Driver seat.

•

Power mirrors.

•

Optional power steering column.

The memory control is on the driver door.

E142554

Saving a PreSet Position

1.

Switch the ignition on.

2. Adjust the memory features to your

desired position.

3. Press and hold the desired preset

button until you hear a single tone.

You can save up to three preset memory
positions. You can save a memory preset
at any time.

Recalling a PreSet Position

Press and release the preset button
associated with your desired driving
position. The memory features move to
the position stored for that preset.

Note: You can only recall a preset memory
position when you switch the ignition off, or
when the transmission is in park (P) or
neutral (N) if the ignition is on.

You can also recall a preset memory
position by:
•

Pressing the unlock button on your
intelligent access key fob if it is linked
to a preset position.

•

Unlocking the intelligent driver door
handle if a linked key fob is present.

Note: Using a linked key fob to recall your
memory position when the ignition is off
moves the seat to the Easy Entry position.

Note: Pressing any active memory feature
adjustment control, or any memory button
during a memory recall, cancels the
operation.

Linking a PreSet Position to your
Remote Control or Intelligent
Access Key Fob

You can save preset memory positions for
up to three remote controls or intelligent
access (IA) keys.

1.

With the ignition on, move the memory
positions to the desired positions.

2. Press and hold the desired preset

button for about five seconds. A tone
sounds after about two seconds.
Continue holding until you hear a
second tone.

3. Within three seconds, press the lock

button on the remote control you are
linking.

To unlink a remote control, follow the
same procedure – except in step 3, press
the unlock button on the remote control.

Note: If more than one linked remote
control or intelligent access key is in range,
the memory function moves to the settings
of the first key to initiate a memory recall.

Easy Entry and Exit Feature

If you enable the easy entry and exit
feature, it automatically moves the driver
seat position rearward up to 2 in (5 cm)
when you switch the ignition off.

The driver seat returns to the previous
position when you switch the ignition on.

You can enable or disable this feature in
the information display. See Information
Displays (page 102).

REAR SEATS

Adjusting the Rear Seats

WARNING

To prevent possible damage to the
seat or safety belts, make sure that
the safety belts are not buckled

when folding the seatback.

E186789

Folding the Seatback

With the seat empty, pull the lever up to
fold the seatback forward.

Unfolding the Seatback

Rotate the seatback upward until the
seatback latches in the upright position.
The seatback will click when it is locked
into position.

Reclining the Seatback

With the seat occupied, pull the lever up
to recline the seatback.

Easy Fold™ Folding Seat (If Equipped)

WARNING

Make sure that the seat is
unoccupied when folding it down.
Folding the seat while occupied

could result in damage to the seat or injury.

Note: The power feature is operational
when the vehicle is in park (P) and the
liftgate has been open for less than 10
minutes.

The controls are located on the left-hand
rear quarter trim panel (accessible from
the liftgate area).

E190965

Folding the Seatback

Press and hold the top control to lower the
left seatback. Press and hold the bottom
control to lower the right seatback.

Unfolding the Seatback

Rotate the seatback up until the seatback
latches in the upright position. The
seatback will click when it is locked into
position.

HEATED SEATS

(If Equipped)

Front Seats

WARNING

People who are unable to feel pain
to their skin because of advanced
age, chronic illness, diabetes, spinal

cord injury, medication, alcohol use,
exhaustion or other physical conditions,
must use caution when using the heated
seat. The heated seat may cause burns
even at low temperatures, especially if
used for long periods of time. Do not place
anything on the seat that may block the
heat, such as a blanket or cushion. This can
cause the heated seat to overheat. Do not
puncture the seat with pins, needles or
other pointed objects. This damages the
heating element and can cause the heated
seat to overheat. An overheated seat may
cause serious personal injury.

Do not do the following:
•

Place heavy objects on the seat.

•

Operate the heated seat if water or any
other liquid spills on the seat. Allow the
seat to dry thoroughly.

Note: The heated seats will only function
when the engine is running.

E146322

Press the heated seat symbol to cycle
through the various heat settings and off.
More indicator lights indicate warmer
settings.

Note: After 90 minutes of operation, the
heated seats switch off. Press the heated
seat symbol to switch the heated seats on.

Rear Seats

WARNING

People who are unable to feel pain
to their skin because of advanced
age, chronic illness, diabetes, spinal

cord injury, medication, alcohol use,
exhaustion or other physical conditions,
must use caution when using the heated
seat. The heated seat may cause burns
even at low temperatures, especially if
used for long periods of time. Do not place
anything on the seat that may block the
heat, such as a blanket or cushion. This can
cause the heated seat to overheat. Do not
puncture the seat with pins, needles or
other pointed objects. This damages the
heating element and can cause the heated
seat to overheat. An overheated seat may
cause serious personal injury.

Do not do the following:
•

Place heavy objects on the seat.

•

Operate the seat heater if water or any
other liquid is spilled on the seat. Allow
the seat to dry thoroughly.

•

Operate the heated seats unless the
engine is running. Doing so can cause
the battery to lose charge.

The rear seat heat controls are on the rear
of the center console.

E146322

Press the heated seat symbol to cycle
through the various heat settings and off.
More indicator lights indicate warmer
settings.

CLIMATE CONTROLLED SEATS

(If Equipped)

Heated Seats

WARNING

People who are unable to feel pain
to their skin because of advanced
age, chronic illness, diabetes, spinal

cord injury, medication, alcohol use,
exhaustion or other physical conditions,
must exercise care when using the heated
seat. The heated seat may cause burns
even at low temperatures, especially if
used for long periods of time. Do not place
anything on the seat that insulates against
heat, such as a blanket or cushion. This
may cause the heated seat to overheat.
Do not puncture the seat with pins, needles
or other pointed objects. This may damage
the heating element which may cause the
heated seat to overheat. An overheated
seat may cause serious personal injury.

Note: Do not do the following:

•

Place heavy objects on the seat.

•

Operate the seat heater if water or any
other liquid spills on the seat. Allow the
seat to dry thoroughly.

Note: The heated seats only function when
the engine is running.

E146322

Press the heated seat symbol to cycle
through the various heat settings and off.
More indicator lights indicate warmer
settings.

Note: After 90 minutes of operation, the
heated seats switch off. Press the heated
seat symbol to switch the heated seats on.

Cooled Seats

Note: The cooled seats only function when
the engine is running.

E146309

Press the cooled seat symbol to cycle
through the various cool settings and off.
More indicator lights indicate cooler
settings.

Climate controlled seat air filter
replacement

Your vehicle is equipped with lifetime air
filters that are integrated with the seats.
Regular maintenance or replacement is
not needed.