Ford Edge (2018 year). Manual — part 28

Auto Start-Stop

Action

Message

The engine needs to be restarted, press the brake pedal to

start.

Auto StartStop Press
Brake to Start Engine

The engine needs to be restarted, press the brake pedal harder

to start.

Auto StartStop Press

Brake Harder to Activate

The engine needs to be restarted, press any pedal to start.

Auto StartStop Press a

Pedal to Start Engine

Select neutral for the system to restart the engine.

Auto StartStop Select

Neutral To Start Engine

Select park for the system to restart the engine.

Auto StartStop Shift to

P, then Restart Engine

The system is not functioning. A manual restart is required.

Auto StartStop Manual

Restart Required

Conditions are not met for the Auto StartStop system to

function properly.

Auto StartStop Not

Available

Battery and Charging System

Action

Message

The charging system needs servicing. If the warning stays on

or continues to come on, contact an authorized dealer as soon

as possible.

Check Charging System

The battery management system detects an extended low-

voltage condition. Your vehicle will disable various features

to help preserve the battery. Turn off as many of the electrical

loads as soon as possible to improve system voltage. If the

system voltage has recovered, the disabled features will

operate again as normal.

Low Battery Features

Temporarily Turned Off

The battery management system determines that the battery

is at a low state of charge. Turn your ignition off as soon as

possible to protect the battery. This message will clear once

you restart your vehicle and the battery state of charge has

recovered. Turning off unnecessary electrical loads will allow

faster battery state-of-charge recovery.

Turn Power Off To Save

Battery

Blind Spot Information and Cross Traffic Alert System

Action

Message

A fault with the system has occurred. Contact an authorized

dealer as soon as possible.

Blindspot System Fault

The system sensors are blocked. See Cross Traffic Alert

(page 218).

Blindspot Not Available

Sensor Blocked See

Manual

The system detects a vehicle. See Cross Traffic Alert (page

218).

Cross Traffic Vehicle

Coming From X

The system sensors are blocked. See Cross Traffic Alert

(page 218).

Cross Traffic Not Avail-

able Sensor Blocked See

Manual

A fault with the system has occurred. Contact an authorized

dealer.

Cross Traffic System

Fault

Doors and Locks

Action

Message

The door listed is not completely closed.

Driver Door Ajar

The door listed is not completely closed.

Passenger Door Ajar

The door listed is not completely closed.

Rear Left Door Ajar

The door listed is not completely closed.

Rear Right Door Ajar

The door listed is not completely closed.

Liftgate Ajar

The hood is not completely closed.

Hood Ajar

The system has disabled the door switches.

Switches Inhibited

Security Mode

The factory keypad code displays in the information display

after system resets the keypad. See Keyless Entry (page

67).

Factory Keypad Code {X

X X X X}

Driver Alert

Action

Message

Stop and rest as soon as it is safe to do so.

Driver Alert Warning Rest

Now

Take a rest soon.

Driver Alert Warning Rest

Suggested

Electronic Stability Control

Action

Message

The system detects a malfunction due to a blocked sensor.

Service AdvanceTrac

The traction control system status.

AdvanceTrac Off

The traction control system status.

AdvanceTrac On

The traction control system status.

AdvanceTrac SPORT

MODE

Engine

Action

Message

Displays when the engine temperature is too high. Stop

your vehicle in a safe place and allow the engine to cool.

If the problem persists, see an authorized dealer. See

Engine Coolant Check (page 272).

High Engine Temperature

Stop Safely

Engine service is required. See an authorized dealer.

Engine Fault Service Now

Check the engine oil level See Engine Oil Check (page

270).

Engine Oil Level Low Check

Level

Fuel

Action

Message

An early reminder of a low fuel condition.

Fuel Level Low

The fuel fill inlet may not be properly closed.

Check Fuel Fill Inlet

Wait for up to 15 seconds while the fuel system depressurizes.

Fuel Door Opening

The fuel system has finished depressurizing and you can begin

to refuel.

Fuel Door Open

A reminder to close the fuel door.

Close Fuel Door

Hill Start Assist

Action

Message

Hill start assist is not available. Contact an authorized dealer.

See Hill Start Assist (page 186).

Hill Start Assist Not

Available

Keys and Keyless Entry

Action

Message

A reminder to press the brake while starting the vehicle.

To START Press Brake

The system does not detect a key in your vehicle. See Keyless

Starting (page 156).

No Key Detected

You pressed the start/stop button to switch off the engine

and your vehicle does not detect your intelligent access key

inside your vehicle.

Restart Now or Key is

Needed

Your vehicle is in the run ignition state.

Run Power Active

There is a problem with your vehicle’s starting system. See

an authorized dealer for service.

Starting System Fault

You have successfully programmed an intelligent access key

to the system.

Key Program Successful

You have failed to program an intelligent access key to the

system.

Key Program Failure

You have programmed the maximum number of keys to the

system.

Max Number of Keys

Learned