Chery QQ6 (Body Accessories and Dimensions). Service Manual — part 1

1

Service Manual For

CHERY QQ6

(Body Accessories and Dimensions)

After Sales Service Department of Chery

Automobile Sales Co., Ltd

2

TABLE OF CONTENTS

Chapter 1 Engine Hood and Luggage Compartment . . . . . . . . . . . . . . . . . . 8

I. Removal of Engine Hood . . . . . . . . . . . . . . . . . . . . . . . . . .. 8

1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2. Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3. Disassembly/Reassembly of engine hood accessories . . . . . . . . . . . . .. 8

3.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . .. 8

Disassembly and adjustment of the engine hood assy. . . . . . . . . . . . . ... 9

Disassembly and assembly of air intake grille assy. . . . . . . . . . . . . . . . 9

5.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . .. 9

Adjustment and assembly of the engine hood lock. . . . . . . . . . . . . . . 10

6.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 10

6.2. Installation of engine hood lock. . . . . . . . . . . . . . . . . ... 10

7. Removal of hood lock control cable . . . . . . . . . . . . . . . . . . ... 10

7.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 10

7.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 12

II. Disassembly/Reassembly of rear boot lid . . . . . . . . . . . . . . . . . . .. 12

1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 12

2. Removal of Trunk Lid Ornament Plate . . . . . . . . . . . . . . . . . ... 12

2.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 12

2.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 12

3. Installation of luggage boot lock. . . . . . . . . . . . . . . . . . . . . 12

3.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 12

3.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 13

4. Removal of license plate lamp . . . . . . . . . . . . . . . . . . . . . 13

4.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 13

4.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 14

Chapter 2 Disassembly/Reassembly of Interior Decorations. . . . . . . . . . . . . ... 15

I. Disassembly/Reassembly of Seat Belt. . . . . . . . . . . . . . . . . . . . . 15

1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 15

2. Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 15

3. Removal Step (Driver’s seat belt is taken as an example) . . . . . . . . . . .. 15

4. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . ... 17

II. Disassembly/Reassembly of Seat. . . . . . . . . . . . . . . . . . . . . ... 18

1. Front passenger seat removal step . . . . . . . . . . . . . . . . . . . .. 18

2. Rear passenger seat removal step. . . . . . . . . . . . . . . . . . . . 18

3. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . ... 20

III. Disassembly/Reassembly of Console . . . . . . . . . . . . . . . . . . . ... 20

1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 20

2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . ... 21

3

IV. Disassembly/Reassembly of Carpet . . . . . . . . . . . . . . . . . . . . .. 22

1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 22

2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . ... 22

V. Removal of Cushion Pad . . . . . . . . . . . . . . . . . . . . . . . . . 23

1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 23

2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . ... 24

Chapter 3 Removal and Maintenance of Door. . . . . . . . . . . . . . . . . . . . 25

I. Disassembly/Reassembly and Maitenance of Front Door . . . . . . . . . . . . ... 25

1. System Composition Diagram . . . . . . . . . . . . . . . . . . . . . 25

2. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 26

3. Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 26

4. Disassembly/Reassembly Step. . . . . . . . . . . . . . . . . . . . . 26

5. Installation and Adjustment Step . . . . . . . . . . . . . . . . . . . . 33

II. Disassembly/Reassembly and Maintenance of Rear Door. . . . . . . . . . . . . 34

1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 34

2. Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 34

3. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 34

4. Installation and Adjustment Step . . . . . . . . . . . . . . . . . . . . 40

Chapter 4 Disassembly/Reassembly and Maintenance of Front/Rear Bumper. . . . . . . 41

Disassembly/Reassembly and Maintenance of Front Bumper. . . . . . . . . . . . 41

1. System Composition Diagram . . . . . . . . . . . . . . . . . . . . . 41

2. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 41

3. Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 41

4. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 42

5. Installation and Maintenance . . . . . . . . . . . . . . . . . . . . . .. 44

Disassembly/Reassembly and Maintenance of Rear Bumper. . . . . . . . . . . . . 45

1. System Composition Diagram . . . . . . . . . . . . . . . . . . . . . 45

2. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 45

3. Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 45

4. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 46

5. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . ... 47

Chapter 5 Disassembly/Reassembly and Maintenance of Headlamp and Fog Lamp . . . . .. 48

1. System Composition Diagram . . . . . . . . . . . . . . . . . . . . . 48

2. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 49

3. Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 49

4. Removal Step of Headlamp . . . . . . . . . . . . . . . . . . . . . . 49

5. Removal of Fog Lamp . . . . . . . . . . . . . . . . . . . . . . . . 52

6. Installation and Adjustment of Headlamp. . . . . . . . . . . . . . . . ... 53

6.1. headlamp Installation Step . . . . . . . . . . . . . . . . . . . ... 53

6.2. Introduction to headlamp function . . . . . . . . . . . . . . . . ... 53

6.2.1. Front view . . . . . . . . . . . . . . . . . . . . . . . . 53

6.2.2. Back view. . . . . . . . . . . . . . . . . . . . . . . .. 53

6.3. Adjustment of headlamp light . . . . . . . . . . . . . . . . . . .. 53

7. Tail Lamp Removal Step. . . . . . . . . . . . . . . . . . . . . . . . 55

4

Chapter 6 Disassembly/Reassembly of Ceiling . . . . . . . . . . . . . . . . . . ... 56

1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 56

2. Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 56

3. Disassembly/Reassembly of Sun Visor. . . . . . . . . . . . . . . . . . . ... 56

3.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . ... 56

3.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . 56

4. Disassembly/Reassembly of Roof Hand-Hold. . . . . . . . . . . . . . . . . 57

4.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . ... 57

4.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . 57

5. Disassembly/Reassembly of Front Ceiling Lamp. . . . . . . . . . . . . . . ... 57

5.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . ... 57

5.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . 58

6. Disassembly/Reassembly of A Pillar Trim. . . . . . . . . . . . . . . . . . .. 58

6.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . ... 58

6.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . 58

7. Disassembly/Reassembly of B Pillar Trim . . . . . . . . . . . . . . . . . . . 58

7.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . ... 58

7.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . 59

8. Disassembly/Reassembly of C Pillar Trim . . . . . . . . . . . . . . . . . . . 59

8.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . ... 59

8.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . 59

9. Disassembly/Reassembly of Ceiling. . . . . . . . . . . . . . . . . . . . ... 59

9.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . . ... 59

9.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . . 60

Chapter 7 Disassembly/Reassembly of Instrument Panel. . . . . . . . . . . . . . . 61

I. Removal of Instrument Panel Accessories . . . . . . . . . . . . . . . . . . .. 61

1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 61

2. Disassembly/Reassembly of Central Console Panel, Audio Unit, Emergency Switch,

A/C Control Switch, Ashtray . . . . . . . . . . . . . . . . . . . . . . .. 61

2.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 61

2.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 62

3. Disassembly/Reassembly of Front Ashtray . . . . . . . . . . . . . . . . 62

3.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 62

3.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 63

4. Disassembly/Reassembly of Glove Case . . . . . . . . . . . . . . . . . 63

4.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 63

4.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 63

5. combination instrument Disassembly/Reassembly of. . . . . . . . . . . .. 63

5.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 63

5.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 64

6. Disassembly/Reassembly of Combination Switch, Wiper Switch, Ignition Switch,

Heliax Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 64

II. Removal of Instrument Panel . . . . . . . . . . . . . . . . . . . . . . .. 65

1. Disassembly/Reassembly of Instrument Panel . . . . . . . . . . . . . . 65

5

1.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 65

1.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 67

2. Removal of Instrument Panel cross beam. . . . . . . . . . . . . . . . 68

2.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 68

2.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 70

Chapter 8 Air Conditioning (A/C) System . . . . . . . . . . . . . . . . . . . . .. 71

I. System Composition. . . . . . . . . . . . . . . . . . . . . . . . . . . 71

II. Removal of Evaporator Assy. . . . . . . . . . . . . . . . . . . . . . . .. 71

1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 71

2. Disassembly/Reassembly Step. . . . . . . . . . . . . . . . . . . . . 71

3. Installation of Evaporator Assy. . . . . . . . . . . . . . . . . . . . ... 73

4. Disassembly/Reassembly of Evaporator Interior . . . . . . . . . . . . . . 73

4.1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . ... 73

4.2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . 78

III. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Chapter 9 Body Dimension. . . . . . . . . . . . . . . . . . . . . . . . . . .. 80

I. Chassis Control Point . . . . . . . . . . . . . . . . . . . . . . . . . . .. 80

II. Body Assembly Dimension . . . . . . . . . . . . . . . . . . . . . . . . 83

1. Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 83

2. Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

3. Left View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

4. Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 104

III. Dimension of Engine Compartment . . . . . . . . . . . . . . . . . . . ... 110

Windscreen Dimension . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

V. Dimension of Opening of Each Part. . . . . . . . . . . . . . . . . . . . . 112

Chapter 10 Wire Harness . . . . . . . . . . . . . . . . . . . . . . . . . . ... 113

Section 1 Battery Negative Electrode Harness . . . . . . . . . . . . . . . . .. 113

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 113

II. Main Connectors Description. . . . . . . . . . . . . . . . . . . . ... 113

III. Disassembly/Reassembly of Battery Harness . . . . . . . . . . . . . . . 113

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 113

(II). Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 113

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 113

Section 2 Engine Compartment Harness . . . . . . . . . . . . . . . . . . . 115

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 115

II. Main Connectors Description. . . . . . . . . . . . . . . . . . . . ... 116

III. Disassembly/Reassembly of Engine Compartment Harness. . . . . . . . 117

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 117

(II). Precautions: . . . . . . . . . . . . . . . . . . . . . . . . ... 117

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 117

Section 3 Electronic Injector Harness. . . . . . . . . . . . . . . . . . . . 125

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 125

II. Main Connectors Description. . . . . . . . . . . . . . . . . . . . ... 126

III. Disassembly/Reassembly of Engine Harness . . . . . . . . . . . . . . . 127

6

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 127

(II). Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 127

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 127

Section 4 Interior Harness. . . . . . . . . . . . . . . . . . . . . . . . 133

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 133

II. Main Connectors Description. . . . . . . . . . . . . . . . . . . . ... 134

III. Disassembly/Reassembly of Interior Floor Harness . . . . . . . . . . . ... 135

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 135

(II). Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 135

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 135

Section 5 Instrument Harness Assy. . . . . . . . . . . . . . . . . . . . .. 142

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 142

II. Definition of Main Connectors. . . . . . . . . . . . . . . . . . . . . 143

III. Disassembly/Reassembly of Instrument Harness . . . . . . . . . . . . 150

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 150

(II). Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 150

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 150

Section 6 Evaporator Harness. . . . . . . . . . . . . . . . . . . . . . . 152

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 152

II. Definition of Main Connectors. . . . . . . . . . . . . . . . . . . . . 152

III. Disassembly/Reassembly of Evaporator Harness . . . . . . . . . . . . ... 153

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 153

(II). Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 153

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 153

Section 7 Front Left Door Harness . . . . . . . . . . . . . . . . . . . . . 155

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 155

II. Main Connectors Description. . . . . . . . . . . . . . . . . . . . ... 156

III. Disassembly/Reassembly of Front Left Door Inner Harness. . . . . . . . .. 157

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 157

(二) , Precautions . . . . . . . . . . . . . . . . . . . . . . . . .. 157

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 157

Section 8 Front Right Door Harness . . . . . . . . . . . . . . . . . . . . .. 159

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 159

II. Main Connectors Description. . . . . . . . . . . . . . . . . . . . ... 160

III. Disassembly/Reassembly of Front Right Door Inner Harness. . . . . . . . 160

1. Removal Step . . . . . . . . . . . . . . . . . . . . . . . . . 160

2. Installation Step. . . . . . . . . . . . . . . . . . . . . . . . . 160

Section 9 Rear Door Harness. . . . . . . . . . . . . . . . . . . . . . . . 161

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 161

II. Main Connectors Description. . . . . . . . . . . . . . . . . . . . ... 162

III. Disassembly/Reassembly of Rear Left Door Inner Harness . . . . . . . . ... 163

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 163

(II). Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 163

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 163

7

IV. Disassembly/Reassembly of Rear Right Door Inner Harness . . . . . . . . . 164

Section 10 Back Door Harness . . . . . . . . . . . . . . . . . . . . . . .. 165

I. Schematic Diagram of Harness . . . . . . . . . . . . . . . . . . . . . 165

II. Main Connectors Description. . . . . . . . . . . . . . . . . . . . ... 166

III. Disassembly/Reassembly of Back Door Inner Harness . . . . . . . . . . .. 167

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 167

(II). Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 167

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 167

Section 11 Defroster Harness. . . . . . . . . . . . . . . . . . . . . . . . 170

I. Schematic Diagram of Defroster Positive Harness. . . . . . . . . . . . . 170

II. Schematic Diagram of Defroster Negative Harness. . . . . . . . . . . . . 170

III. Main Connectors Description . . . . . . . . . . . . . . . . . . . . . 170

IV. Disassembly/Reassembly of Rear Defroster Harness . . . . . . . . . . . . 171

(I). Preparation . . . . . . . . . . . . . . . . . . . . . . . . . .. 171

(II). Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 171

(III). Removal Procedure . . . . . . . . . . . . . . . . . . . . . .. 171

8

Chapter 1 Engine Hood and Luggage Compartment

I. Removal of Engine Hood

1. Preparation

Tool: flat head screwdriver, pliers, wrench

2. Precautions

2.1. During the removal, pay more attention to

the application of appropriate strength.

No rude operation.

2.2. During the removal/reassembly of trim,

especially pay more attention to the protection

of surface ornaments so that any ornament may

not be damaged.

3. Disassembly/Reassembly of engine
hood accessories

3.1. Removal Step

3.1.1. Remove the clip from the heat insulation

washers (19 pcs in total) with a flat head

screwdriver, and detach the heat shield from the

engine compartment.

3.1.2. Pull off the washing liquid hose.

3.1.3. Detach two water spray nozzle clips from

the bottom of engine hood, push the nozzle

from the bottom of engine hood, and take out

the nozzle from the outside.

3.2. Installation Step

The installing steps are reverse to those for

removal.

9

4. Disassembly and adjustment of the
engine hood assy.

Preparation of tool(s): 13# wrench

4.1. Take off four adjusting bolts from engine

hood. And remove the engine hood.

At the same time, unscrew four adjusting bolts

to adjust the front/rear position and right/left

position of the engine hood.

4.2. Installation of engine hood assy.:

The installing steps are reverse to those for

removal.

Installation torque is 30±1Nm

5. Disassembly and assembly of air
intake grille assy.

Preparation of tool(s): cross screwdriver, socket

wrench

5.1. Removal Step

5.1.1. Open the engine hood by hand.

5.1.2. Use a cross screwdriver to remove the fix

screw from the intake grille.

5.1.3. Utilize a socket wrench to remove the

fixing bolts from the intake grille.

5.1.4. Detach the intake grille.

5.2. Installation Step

The installing steps are reverse to those for

removal.

Installation torque is 5±1Nm

10

6. Adjustment and assembly of the
engine hood lock

Preparation of tool(s): 10# wrench

6.1. Removal Step

6.1.1. Unscrew three centering bolts from the

engine hood, and then remove the engine hood

lock.

Also unscrew these three bolts to adjust the

position of engine hood lock.

Torque: 9±1 Nm

6.1.2. Remove the lock cable of front engine

hood from engine hood lock assy.

6.2. Installation of engine hood lock

The installing steps are reverse to those for

removal.

Installation torque is 9±1Nm

7. Removal of hood lock control cable

Preparation of tool(s): 8# wrench, 10# wrench,

flat head screwdriver

7.1. Removal Step

7.1.1. Open the engine hood inside the driver’s

cab, and remove two fixing bolts from the

handle.

Installation torque is 9±1Nm

7.1.2. Remove the front hood cable from the

hood.

11

7.1.3. Remove the hood lock and detach the

engine hood lock control cable from the hood

lock assy..

7.1.4. Remove three clips used to fix the control

cable by hand or with a flat head screwdriver.

7.1.5. Draw out the control cable from the

engine compartment.

12

7.2. Installation Step

The installing steps are reverse to those for

removal.

CAUTION: In case of installation, the groove

on control cable shall be inserted into the pull

groove; the control cable penerates into driver’s

cab through the engine compartment, and shall

passes through a small hole and then enters into

the cab, as shown in the figure.

II. Disassembly/Reassembly of

rear boot lid

1. Preparation

Tools: Flat head and cross screwdriver, socket

wrench, open-end wrench

Materials: clip

2. Removal of Trunk Lid Ornament
Plate

2.1. Removal Step

2.1.1. Remove the screws from the fixed

luggage boot internal guard plate with a cross

screwdriver.

2.1.2. Remove the disposable clips from the

fixed luggage boot internal guard plate with a

flat head screwdriver, and then remove the

luggage boot internal guard plate.

2.2. Installation Step

The installing steps are reverse to those for

removal.

3. Installation of luggage boot lock

3.1. Removal Step

Preparation of tool(s): 10# wrench

3.1.1. Detach the connectors of the luggage

boot lock body motor.

Small hole

13

3.1.2. Detach two locating bolts from the

luggage boot lock (the installation torque is 9±1

Nm)

3.1.3. Remove the luggage boot lock core.

3.1.4. Remove two fixing bolts from the trunk

(i.e. luggage boot) lock body with a socket

wrench.

3.1.5. Take off the trunk lock body.

3.2. Installation Step

The installing steps are reverse to those for

removal.

Precautions on installation of luggage boot

lock: check whether the lock column is

deformed, whether the riveted connections are

in its proper positions, and whether the lock

tongue can open or close flexibly, smoothly.

4. Removal of license plate lamp

Preparation of tool(s): cross screwdriver,

open-end wrench.

4.1. Removal Step

4.1.1. Remove the trunk internal ornament plate

(see Removal of trunk lid ornament plate)

4.1.2. Remove two fixing bolts from the license

plate lamp with an open-end wrench.

14

4.1.3. Disconnet the connecting plugs from the

right and left license plate lamps and then take

off the license plate lamp assy.

4.1.4. Remove two fix screws from the license

plate lamp with a cross screwdriver.

4.1.5. Take off the license plate lamp

4.1.6. Take off the bulb from the license plate

lamp.

4.2. Installation Step

The installing steps are reverse to those for

removal.

15

Chapter 2 Disassembly/Reassembly of Interior Decorations

I.

Disassembly/Reassembly

of

Seat Belt

1. Preparation

Tools: flat head screwdriver, wrench, sleeve.

Parts: disposable clips.

2. Precautions

Keep the seat belt clean, avoid the oil stain, and

check whether the seat belt is damaged.

3. Removal Step (Driver’s seat belt is
taken as an example)

Prize the front threshold pressing plate

carefully with a flat head screwdriver.

3.2. Remove the weatherproof rubber strip of

the front door opening.

3.3. Remove the rear scuff plate.

16

3.4. Remove the weatherproof rubber strip of

the rear door opening.

3.5. Remove the seat belt lower ornament

cover.

3.6. Unscrew the fixing nuts with a 17# sleeve,

and detach the B pillar lower trim.

Installation torque is 50±5Nm

3.7. Unclench the ornament cover on the seat

belt regulator with a flat head screwdriver.

CAUTION: Pay attention to the breakage of

clip inside the regulator.

3.8. Loosen the fixing nuts with a 17# sleeve,

and then take off the seat belt.

Installation torque is 50±5Nm