Chery B14. Manual — part 8
S
ervice Manual for Chery V525 Car Chassis
4.3.12 Remove another fixing bolts fastening subframe
and vehicle body via 21# sleeve, and then removes the
front axle assembly.
Torque: 150±10 N.m
4.3.13 Remove the fixing bolt and nut of gum cover of
stabilizer rod via 13# sleeve.
Torque: 50±5N.m
5. Assembly procedures
Refer to the disassembly procedures of front axle and front suspension.
S
ervice Manual for Chery V525 Car Chassis
Ⅱ. Disassembly, assembly and overhaul of rear axle and suspension
1. System constructional drawing
Structural diagram of Rear Axle and Suspension System
1. Fixing nut of shock absorber 2. Flat-tip shim
3. Shock absorber assembly 4. Fixing bolt of shock absorber
5. Fixing nut of shock absorber bearing 6. Fixing nut of shock absorber bearing
7. Rear axle connection hinge 8. Knuckle joint bolt
2. Preparation
Tools: 8#, 10#, 13#, 17#, 19# sleeve
S
ervice Manual for Chery V525 Car Chassis
3. Precautions
3.1Please wear necessary labor protection supplies to avoid
accidents.
3.2When carry out maintenance and repair to chassis, please
note that whether the safety lock of lifting machine is locked.
3.3When carry out disassembly and assembly to shock
absorber spring, prevent spring ejection from being injured.
4. Disassembly and assembly procedures
4.1. Removal of shock absorber assembly
4.1.1 Unscrew tire clamp nut clockwise using 19#
torque spanner or driver's spanner, and then remove the
tire (take the left side tire for example).
Torque: 110N.m
4.1.2 Remove the fixing bolt fastening hand brake
control cable and rear axle via 10# sleeve.
Torque: 9-12N.m
4.1.3Remove the connecting bolts of shock absorber
assembly and rear axle via 19# sleeve.
Torque: 110±10N.m
4.1.4Remove the two fixing bolts of the luggage
compartment via 7# sleeve.
Torque: 7±1N.m
S
ervice Manual for Chery V525 Car Chassis
4.1.5 Remove the fixing bolt of the back plate assembly
of storage box via 8# sleeve.
Torque: 7±1N.m
4.1.6 Remove the fixing bolt of seat via 17# sleeve.
Torque: 25±3N.m
4.1.7 Prize up inner trim panel assembly via screwdriver.
4.1.8Remove the fixing nut of shock absorber bearing
via 13# sleeve, and then remove shock absorber
assembly.
Torque: 90±8 N.m
4.1.9 Structural diagram of shock absorber assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст