Chery Tiggo 5 (T21). Manual — part 246
21–
9
21
Differential Planetary Gear
Removal
1. Remove the differential (
2. Remove the differential planetary gear.
a. Tap out the dowel pin (2) with a punch (1).
b. Remove the planetary gear shaft (1), planetary gear
(2) and drive shaft gear (3).
Installation
Installation is in the reverse order of removal.
Differential Parts Inspection
1. Clean all the components.
2. Check the following components for wear:
Driven gear of final drive
Planetary gear washer
Drive shaft gear
Planetary gear
Planetary gear shaft
Drive shaft gear washer
2
1
RA19200060
3
2
1
RT21210070
CAUTION
Adjust clearance until the gear clearances of both sides are the same during installation.
The drive shaft gears and planetary gears should operate normally after tapping in the dowel pin.
21–
10
1
22
AXLE
Description 22-3
Specifications 22-5
Tools 22-6
Removal 22-9
Installation 22-11
Removal 22-14
Installation 22-16
Front Sub Frame Welding Assembly
Removal 22-17
Installation 22-18
22–
3
22
GENERAL INFORMATION
Description
Front Axle
1 - Front Right Connecting Rod Assembly
2 - Front Stabilizer Bar
3 - Front Stabilizer Bar Retainer
4 - Front Stabilizer Bar Rubber Bushing
5 - Front Left Connecting Rod Assembly
6 - Front Left Control Arm Assembly
7 - Front Control Arm Ball Pin Assembly Locking Nut 8 - Front control Arm Ball Pin Lock Pin
9 - Front Left Control Arm Ball Pin Assembly
10 - Front Rubber Bushing Assembly
11 - Side Rail Welding Assembly
12 - Front Sub Frame Welding Assembly
13 - Front Right Control Arm Assembly
14 - Front Right Control Arm Ball Pin Assembly
×2
×2
×2
×2
×2
×2
×2
×2
×2
×2
×2
9
3
4
5
6
1
7
8
2
12
13
10
11
14
RT21220010
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст