Chery Tiggo 5 (T21). Manual — part 487
45–
26
45
11.Remove 2 fixing bolts (arrow) from blower.
(Tightening torque: 4 ± 1 N·m)
12.Separate the instrument panel wire harness.
a. Disconnect the connector (1) from airbag control
module.
b. Remove the fixing nuts (2) from ground wire.
(Tightening torque: 15 ± 2 N·m)
c. Remove the clips (arrow) from lower part of
instrument panel wire harness.
d. Remove the clips from upper part of instrument panel
wire harness, and separate the instrument panel wire
harness from instrument panel crossmember.
13.Remove the instrument panel crossmember assembly.
a. Remove the fixing bolt (arrow) from outer part of
instrument panel crossmember assembly.
(Tightening torque: 25 ± 3 N·m)
RT21450491
2
1
RT21450501
RT21450500
RT21450530
45–
27
45
b. Remove 4 fixing bolts (arrow) from instrument panel
crossmember assembly.
(Tightening torque: 25 ± 3 N·m)
c. Remove 4 fixing nuts (1) from instrument panel
crossmember assembly.
(Tightening torque: 7 ± 1 N·m)
d. Remove 2 fixing screws (2) from instrument panel
crossmember assembly, and remove the instrument
panel crossmember assembly.
(Tightening torque: 7 ± 1 N·m)
14.Remove the instrument panel crossmember bracket assembly (take left side as an example).
a. Remove 4 fixing bolts (arrow) from instrument panel
crossmember bracket assembly.
(Tightening torque: 23 ± 2 N·m)
b. Remove the instrument panel crossmember bracket
assembly.
Installation
Installation is in the reverse order of removal.
RT21450520
2
1
RT21450540
CAUTION
Make sure to tighten fixing bolts to the specified torque when installing instrument panel crossmember
assembly.
Check airbag for proper installation after installing instrument panel crossmember assembly.
Check each electrical equipment for proper operation after installing instrument panel crossmember
assembly.
45–
28
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст