Chery Tiggo. Manual — part 438
Cross section D4-D4, requirements for clearance and
levelness.
Cross section D5-D5, requirements for clearance and
levelness.
1 - Rear Back Door
2 - Rear Headlight
1 - Right Section Of Rear
Bumper
2 - Middle Section Of Rear
Bumper
BODY DIMENSIONS
LTSM150030
LTSM150031
15
BUMPERS
Front Bumper
Removal & Installation
1. Remove the left and right headlamp (See Headlamp Removal & Installation in Section 15 Body & Accessories).
2. Remove the three front bumper mounting bolts (1).
3. Remove the front bumper side mounting bolts and the connecting bolts (3) from the front wheel house.
4. Raise the vehicle and remove the mounting bolts (2) under the front bumper.
5. Disconnect the front fog light electrical connectors and remove the front bumper.
6. Installation is in the reverse order of removal.
LTSM150074
DOORS
Specification
Torque Specifications
DESCRIPTION
TORQUE (N·m)
Left/Right Front Door Upper Hinge to Body Bolts
36 ± 4
Left/Right Front Door Upper Hinge to Door Bolts
36 ± 4
Left/Right Front Door Lower Hinge to Body Bolts
36 ± 4
Left/Right Front Door Lower Hinge to Door Bolts
36 ± 4
Left/Right Rear Door Upper Hinge to Body Bolts
36 ± 4
Left/Right Rear Door Upper Hinge to Door Bolts
36 ± 4
Left/Right Rear Door Lower Hinge to Body Bolts
36 ± 4
Left/Right Rear Door Lower Hinge to Door Bolts
36 ± 4
Back Door Upper Hinge to Body Bolts
36 ± 4
Back Door Upper Hinge to Door Bolts
50 ± 5
Back Door Lower Hinge to Body Bolts
35 ± 3
Back Door Lower Hinge to Door Bolts
50 ± 5
Left Hood Hinge to Body Bolts
23 ± 2
Left Hood Hinge to Hood Bolts
23 ± 2
Right Hood Hinge to Body Bolts
23 ± 2
Right Hood Hinge to Hood Bolts
23 ± 2
Rear Mounting Bracket of Front Fender to Body Bolts
10 ± 1
Left/Right Front Fender to Body Bolts
10 ± 1
Radiator Support to Body Bolts
10 ± 1
15
Front Door
Removal & Installation
1. Disconnect the negative battery cable.
2. Disconnect the inner harness electrical connector
on the front door.
3. Remove the mounting bolts (1) from the front door
hinge.
4. Remove the front door assembly.
5. Installation is in the reverse order of removal.
Disassembly
1. Turn the ignition switch off.
2. Using a small trim stick, remove the pull handle
cover (1) from the pull handle (2).
DOORS
LTSM150111
LTSM150139
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст