Chery Tiggo. Manual — part 396
ON-VEHICLE SERVICE
Front Seat Belt and Pre-Tensioner
Removal & Installation
1. Turn the ignition off.
2. Disconnect the negative battery cable.
3. Remove the seat belt upper mounting bolt (1).
4. Remove the seat belt lower mounting bolt (1).
5. Remove the B-pillar lower trim panel.
LTSM150077
LTSM150076
6. Remove the front seat belt pre-tensioner retaining
bolt (1) and screw (2).
(Tighten: Front seat belt retaining bolt to 50 N·m)
7. Remove the front seat belt and pre-tensioner.
8. Installation is in the reverse order of removal.
Seat Belt Slider Track
Removal & Installation
1. Turn the ignition off.
2. Remove the seat belt upper mounting bolt (1).
3. Remove the B-pillar upper trim panel.
ON-VEHICLE SERVICE
LTSM140003
LTSM150077
14
4. Remove the two bolts (1) and then remove the
seat belt slider track.
(Tighten: Adjustable shoulder belt anchor bolts to
50 N·m)
5. Installation is in the reverse order of the removal.
Rear Seat Belt and Pre-Tensioner
Removal & Installation
1. Turn the ignition off.
2. Remove the rear seat belt mounting bolts (1).
(Tighten: Rear seat belt mounting bolts to 50 N·m)
3. Remove the C-pillar (See C-pillar Trim Panel
Remove & Installation in Section 15 Body & Acces-
sories).
ON-VEHICLE SERVICE
BESM140006
LTSM140005
4. Remove the pre-tensioner mounting bolt (1) and
screw (2).
5. Remove the pre-tensioner.
6. Installation is in the reverse order of the removal.
ON-VEHICLE SERVICE
LTSM140004
14
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст