Chery Tiggo. Manual — part 10
Rear Crankshaft Oil Seal Guide
CH-20006
Front Crankshaft Seal Installer
CH-20007
Front Crankshaft Seal Guide
CH-20008
Camshaft Holder
CH-20010
Valve Seal Installer
CH-20011
GENERAL INFORMATION
Valve Stem Seal Installer Guide
CH-20012
Valve Seal Remover
CH-20013
Valve Keeper Installer
CH-20017
Valve Spring Compressor
CH-20018
Crankshaft Belt Pulley Fixture
CH-20019
GENERAL INFORMATION
02
Flywheel Fixture
CH-20043
Engine Hoist
Oil Filter Remover
CH-10003
Lubrication System
The engine lubrication system operates as follows:
• Oil is drawn into the oil pump through the oil pump strainer tube in the sump of the oil pan.
• Oil is pumped through the oil filter on the cylinder block.
• Oil enters the main oil gallery where it is distributed to the crankshaft main journals and to the cylinder head.
• From the main journals, the oil is routed through cross-drilled passages in the crankshaft to lubricate the con-
necting rod bearings. Controlled leakage through the crankshaft main bearings and connecting rod bearings is
slung radially outward to cool and lubricate the cylinder walls as well as the entire connecting rod, piston and
piston ring assembly.
• The engine lubrication system is a full-flow filtration, pressure feed type. The oil pump body is mounted to the
engine block. The pump inner rotor is driven by the crankshaft.
Engine Oil Pressure Specifications
Lower Idle Speed (800 ± 50 RPM)
1.2 - 1.5 bar
High Idle Speed (2000 RPM)
3.2 - 3.5 bar
High Speed (4000 RPM)
3.7 ± 0.5 bar
GENERAL INFORMATION
Engine Lubrication System Exploded View
1 - Oil Dipstick
2 - Oil Dipstick Bolt
3 - Oil Dipstick Bracket
4 - Oil Dipstick Guide
5 - Crankshaft Rear Oil Seal
6 - O-Ring
7 - Oil Filter Bracket Gasket
8 - Oil Filter Bracket
9 - Pressure-Relief Plunger
10 - Flange Bolt
11 - Flange Bolt
12 - Oil Cooler
13 - Oil Filter Connector
14 - Oil Filter
15 - Dowel Pin
16 - Oil Pan Bolt
17 - Oil Pan Bolt
18 - Oil Pan Bolt
19 - Oil Pan
20 - O-Ring
21 - O-Ring
22 - Oil Pump Strainer Bolt
23 - Oil Pump Strainer
24 - Baffle Plate
25 - O-Ring
26 - O-Ring
27 - Crankshaft Front Oil Seal
28 - Oil Pump Bolt
29 - Oil Pump Assembly
30 - Oil Pump Assembly Gasket
GENERAL INFORMATION
LTSM020161
02
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст