Chery Tiggo. Manual — part 405
Power Door Lock System (Page 4 of 5)
DOOR LOCKS
LTSMW150054T
15
Power Door Lock System (Page 5 of 5)
DOOR LOCKS
LTSMW150055T
Door Lock Switch
Removal & Installation
1. Turn the ignition switch off.
2. Remove the power window and door lock/unlock
switch bezel mounting screw (1).
3. Using a trim stick, pry out the power window and door lock/unlock switch assembly from the front door.
4. Disconnect the power window and door lock/unlock switch electrical connectors.
5. Remove the power window and door lock/unlock switch retaining screws to remove the power window and door
lock/unlock switch.
6. Installation is in the reverse order of removal
Door Lock Assembly
Removal & Installation
NOTE :
The passenger door is shown, all other doors are similar.
1. Disconnect the negative battery cable.
2. Turn the ignition switch off.
3. Using a small trim stick, remove the pull handle
cover (1) from the pull handle (2).
DOOR LOCKS
LTSM150097
LTSM150139
15
4. Remove the inner door handle mounting screw (1).
5. Remove the pull handle mounting screws (2).
6. Using a small trim stick, remove the inner door
handle trim bezel (1).
7. Carefully pry the door trim panel clips from the door.
8. Disconnect the power window switch and the door lamp electrical connector.
9. Remove the door trim panel.
10. Disconnect the speaker connector (1).
11. Remove the inner door handle assembly mounting
screw (2).
12. Disconnect the inner door handle cables (3).
13. Remove the protective film (4).
DOOR LOCKS
LTSM150134
LTSM150140
LTSM150135
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст