Chery S11 / Chery QQ. Manual — part 202
Chery QQ Maintenance Manual Chassis System
3. Use bolts to fix ignition lock shell and shaft
shell.
4. Insert new shaft into pillar.
Points of attention
Don’t turn steering and ignition lock in LOCK
position.
5. Push guide bearing into pillar.
6. Insert and fix steering shaft.
7. Screw bolts.
8. Install steering wheel with air bag and air
bag components.
Fixture
Screw shaft flange bolts to 22.5-27.5Nm.
Screw gear flange bolts to 22.5-27.5 Nm.
Screw steering wheel and shaft bolts to
27-33Nm.
10. Check forwards position for steering
mechanics.
Description and operation
Description Steering wheel and steering
column
Steering component can realize the functions
besides of steering.
1. Steering column
Steering can absorb energy. When crashing
happens, the pillar will shrink to reduce the
probability to hurt driver.
2. Ignition switch and steering lock Ignition
switch and steering lock can prevent stealing
vehicle.
3. Multi-purpose operation lever
Multi-purpose operation lever can control
following parts:
-
High beam of head lamp
-
Windshield wiper and cleaner
Remove and re-install steering pillar
Use specified bolts to fix the pillar to make
sure absorb engine action. Be careful to
remove or transport the pillar.
1. The drawer to remove steering wheel is not
recommended one.
2. The top of pillar is knock badly.
3. Something leans against the pillar.
4. The pillar falls off.
97
Chery QQ Maintenance Manual Chassis System
Power steering system
Exterior identify
Power steering box
(1) Steering tie rod
socket unit
(2) Fixed ring
(3) Dust cap
(4) Lock
(5) Check nut
(6) Tie rod ripple cowl hoop
(7) Ripple cowl
(8) Steering box shell ripple cowl clamp
(9) Lock nut
(10) Tie rod in band ball
(11) Limiting stopper
(12) Circlet
(13) Facing ring
(14) Searing ring
(15) Bearing
(16) Nut
(17) Cover cap
(18) Lock nut
(19) Dust cap
(20) Circlet
(21) Tie rod end
(22) Check nut
(23) Tie rod ripple cowl hoop
(24) Ripple cowl
(25) Steering box
(26) Tie rod in band ball unit
(27) Limiting stopper
(28) Tube
(29) Oil pipe clip
(30) Hydraulic piping
(31) Hydraulic piping
(32) Trust sealing ring
98
Chery QQ Maintenance Manual Chassis System
Steering oil tank
Steering oil pipe
Power steering gear
Steering oil pump
Power steering service schematic diagram
99
Chery QQ Maintenance Manual Chassis System
Steering system fizzy noise
Step
Measure
Yes
No
Identification: Fizzy noise is heard during Engine running or steering wheel turning
1
If the fizzy noise becomes loud When
comparing with other normal vehicle?
TO step 2
System perfect
2
If the fizzy noise becomes loud? If
steering fluid level is too low?
TO step3
TO step4
3
Fill fluid into the system.
Does customer still complain?
TO step1
System perfect
4
Is the noise from inside of vehicle?
TO step5
TO step7
5
The noise may enter passenger
compartment through outlet of front
instrument panel.
TO step6
TO step7
6
Repair or replace steering pillar seal.
Does customer still complain?
TO step1
System perfect
7
Make sure the lay for steering hose and
pipe is correct ( not touch with front
instrument panel).
Repair or replace hose and pipe if
necessary.
Does customer still complain?
TO step8
System perfect
8
Confirm The source of noise. Check
steering pump and steering institute.
Repair or replace parts if necessary.
Does customer still complain?
TO step1
System perfect
Steering system chatter noise
State
Measure
Power steering system piping wear
Ensure power steering wear refer hydraulic
piping replace
Steering box looseness
Fixture
steering box nut torque refer
fastener specifications
Tie rod one end or both ends looseness
Repair or replace tie rod end if necessary
Steering universal joint looseness
Repair or replace the universal joint refer if
necessary
100
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст