Chery S11 / Chery QQ. Manual — part 299
Emergency situation
75
Emergency situation
Emergency situation
77
Emergency situation
Driver's tool
Spare tire
Driver's tool and spare tire are all stored
in the place for spare tires under
luggage compartment floor.
Type
of
Jack
Scalable
Maximum
operating load
600kg
Lubricant
type
Lithium
type
Notice
1
Attach spare tire and driver's tool
tightly so as to prevent injures in the case
of emergency braking or accident2
The
jack supplied here is only applied for the
specified vehicle and not allowed to
support any other vehicle or weight;3
After vehicle is jacked ,engine is not
permitted to start in case accident should
happen.;4
If some operations must be
done under vehicle, be sure to support
vehicle securely with proper brace.
Wheel replacement
To avoid accident , following suggestions
should taken when a tire needs to be
replaced:
·
Drive vehicle out of driveway
to clear safe area .
-Park vehicle on horizontal road.
-Turned off ignition switch and remove
ignition key.
-Turn on hazard warning flashlight and
apply hand brake, put transmission in "
1"gear or "R" gear if necessary.
-Apply an wedge after or before the
wheel diagonal to the wheel which is to
be replaced to guard vehicle.
-Set a trigonometry warning plate 10m
away from vehicle.
-Have all passengers out of vehicle to
safe area.
Replacement steps
-Remove wheel cover.
-Loosen all wheel bolts a full turn with
wheel spanner , but do not remove bolts
before wheel is lifted from ground.
-There are recesses in the front and rear
bottom of vehicle for mounting jack.
Jacking points are marked by semicircle
cuts. Locate jack vertically near the front
or back of the wheel which is to be
replaced.Turn jack bolt clockwise by
hand until jack head contacts chassis..
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст