Chery S11 / Chery QQ. Manual — part 69
Chery QQ Service Manual BCM Computer Control System
(1) Explosive view
(2)Usage/operation guide and warning
Usage/operation guide
①
According to the different driver’s visual, adjust the mirror angular of the
assembly
②
Turn the handle to adjust the mirror angular in the up and down direction to
prevent dazzle.
Warning:
If the Number of manual adjusts excesses a predetermined value, operating
force will lower.
3、Assemble, disassemble and warning
Steps of assemble and disassemble
(
1)Prize off the mirror frame with tools, and remove damaged mirror
(
2)Put new mirror in the mirror case in position, insert the mirror frame in the
corresponding groove of mirror case assembly
Notice:
(
1)Remove the mirror frame with caution, don’t scratch or damage other parts
(
2)Put the new mirror in the correct position of the mirror case, face the
reflecting surface outward; Insert mirror frame in position.
2. Structure of power rearview mirror and control switch
- 120 -
Chery QQ Service Manual BCM Computer Control System
The rearview mirror of Chery S11 is electric controlled. If the driver turns the turning
switch on, turning light of the rearview mirror gives turning signal in the corresponding
direction. Turn the adjust button in the car to adjust the angular of the mirror in upward,
downward, leftward or rightward direction.
In the power rearview mirror on the both side, permanent magnet motors are provided,
four currents, i.e. two positive and two negative, can be attained by switching the two
motor switches, so that adjustment in different direction can be done.
The control switches are provided in the combination switch on the driver side. When the
start-up switch is ON, operate the switches in the four directions to select the rearview
mirror to be adjusted. On the control switch panel there are L, R printed, L stands for left
rearview mirror, and R for right rearview mirror, stop operating is in the middle. After
the mirror to be adjusted is selected, operate the switch in four directions
above-mentioned, the space angle of the selected mirror is adjusted. After the adjustment,
turn the switch back to the middle. In the figure power rearview mirror and the switches
thereof are shown.
Power rearview mirror
1-
Left rearview mirror assembly
2- Wire connector 3- Control switch
Notice:
If adjust the rearview mirror manually, do not go beyond the range of adjust angle,
otherwise the function or service life thereof will be influenced.
- 121 -
Chery QQ Service Manual BCM Computer Control System
Technical parameter
No. Parameter
Criterion
1
reflectivity of the mirror
≥40%
2
curvature of the mirror surface
Left:R1200~R2000
Right:R1200
3 upward/downward,
leftward/rightward
turning angle of the rearview mirror
≥7°
folding angle inward of left rearview
mirror
Max 65°
4
folding angle outward of left rearview
mirror
Max 70°
folding angle inward of right rearview
mirror
Max 70°
5
folding angle outward of right rearview
mirror
Max 70°
The power rearview mirror consists of mirror glass (reflecting surface), two motors,
connecting member, driving unit and case etc. control switches include rotary switch,
swing switch and wiring harness etc.
- 122 -
Chery QQ Service Manual BCM Computer Control System
Electric circuit diagram of power rearview mirror
3. Inspection of power rearview mirror
(1)
Power rearview mirror can only be operated in one direction
For example, the
power rearview mirror can only turn left or turn up, defective switch can be
- 123 -
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст