Chery Fora (Elara A520). Manual — part 16

Chery Service Manual for A520 Body Dimension and Accessories

3

CHAPTER ONE FRONT ACCESSORIES

I. DISASSEMBLING THE ENGINE
HOOD

1. Pry out the snap clips (7 total) with a

screwdriver, and dismount the heat
shield;

Figure 2

2. Loosen the washing hose, and then keep

prying the spray nozzle clip to take out
the spray nozzle from outside;

Figure 3

3. The installing steps are reverse to those
for removal.

4. Adjusting the engine hood:

Replace the centering bolt with a washer
accompanied bolt. (The centering bolt is the
fixing bolt for the engine hood hinge, which
must be replaced before adjusting the engine
hood.)

Adjust the engine hood in front, back and
vertical directions;

Unscrew the hinge bolts on the engine hood
sides to adjust the engine hood.

Adjust the engine hood in vertical direction.

Turn the cushion to adjust the engine hood.

Figure 4

Chery Service Manual for A520 Body Dimension and Accessories

4

II. DISASSEMBLING

THE

FRONT

BUMPER

1.

Remove the fastening screws on the air
inlet grille to dismount the air inlet
grille;

Figure 5

2.

Remove the upper fastening bolts on the
front bumper;

Figure 6

3.

Remove the lower fastening bolts (each
at left and right) and two bottom
connecting bolts on the front bumper;

Figure 7

Chery Service Manual for A520 Body Dimension and Accessories

5

4. Remove the screws with a club

screwdriver, and pull out the lower fog
light connecting plug to remove the front
bumper.

Figure 8

III. DISASSEMBLING

THE

HEADLAMP:

1.

To remove the headlamp, remove the
four bolts and pull out the connecting
harness;

A Side Light: 12V 5W

B Headlamp Lower Beam: 12V 55W

C Turn Light: 12V 5W

D Headlamp High Beam: 12V 55W

Figure 9

2.

Remove the lamp holder cover;

Figure 10

C

A

B

D

Chery Service Manual for A520 Body Dimension and Accessories

6

3.

Pull out the harness to back out the high
beam bulb counter-clockwise;

Figure 11

4.

Pull out the harness, open the circlip,
and then back out the lower beam bulb
counter-clockwise;

Figure 12

5. Pull out the side light directly;

Figure 13