Автомобили Chery: руководства по ТО — часть 28

深 圳 市 元 征 科 技 股 份 有 限 公 司

LAUNCH TECH CO., LTD.

深圳市元征软件开发有限公司 LAUNCH SOFTWARE DEVELOPMENT CO.,LTD.

地址:518112 广东省深圳市龙岗区坂雪岗工业区五和大道北元征工业园

ADD:

LAUNCH INDUSTRIAL PARK,NORTH OF WUHE ROAD,BANXUEGABF,LONGGANG DISTRICT, SHENZHEN,P.R,CHINA.

电话

TEL:86-755-84528427 传真 FAX:86-755-84528454

保留一切解释权，处置权，包括复印及传达至第三方。

编写：黄惠生 2008-9-11 15:01 第 63 页 总 274 页

2.4 防盗系统

;0x0d0c
"B1000","ECU defect, Internal errors"
"B3040","Communication error on W-Line, ECM doesn't answer on Challenge or Response requests"
"B3042","W-Line short circuit to ground"
"B3043","W-line short circuit to battery"
"B3045","DWA line short circuit to ground or open circuit,DWA line malfunction "
"B3048","DWA line short circuit to battery"
"B3050","Relay extern line short circuit to ground or open circuit,relay extern line malfunction
"
"B3053","Relay extern line short circuit to battery"
"B3055","No transponder modulation or no transponder"
"B3056","No transponder fixcode programmed"
"B3057","No security code programmed"
"B3060","Unprogrammed transponder fixcode received"
"B3061","Disturbed or no challenge / response transponder communication"
"B3077","Read-only Transponder detected"

2.5 ISU(智能控制)

N/A

3 东方之子系列 (B11)

3.1 发动机系统

3.1.1 三菱电控系统

; 0xC002,

"11","OXYGEN SNSR"

"12","AFS"

"13","AIR TEMP.SNSR"

PDF 文件使用 "pdfFactory Pro" 试用版本创建

ÿ

www.fineprint.com.cn

深 圳 市 元 征 科 技 股 份 有 限 公 司

LAUNCH TECH CO., LTD.

深圳市元征软件开发有限公司 LAUNCH SOFTWARE DEVELOPMENT CO.,LTD.

地址:518112 广东省深圳市龙岗区坂雪岗工业区五和大道北元征工业园

ADD:

LAUNCH INDUSTRIAL PARK,NORTH OF WUHE ROAD,BANXUEGABF,LONGGANG DISTRICT, SHENZHEN,P.R,CHINA.

电话

TEL:86-755-84528427 传真 FAX:86-755-84528454

保留一切解释权，处置权，包括复印及传达至第三方。

编写：黄惠生 2008-9-11 15:01 第 64 页 总 274 页

"14","TPS"

"21","CLT TEMP.SNSR"

"22","CRANK A.SNSR"

"23","CAM POS.SNSR"

"24","SPEED SNSR"

"25","BARO.PRS.SNSR"

"31","KNOCK SNSR"

"41","INJECTOR"

"64","ALT FR SIG"

"54","IMMOB. COMM."

"44","IG. SGNL 1"

"61","ELC-4AT COMM."

"36","IG. SGNL.TERMI."

3.1.2 德尔福电控系统

;0x0f30

"P0105","Manifold pressure too high or low"

"P0110","Manifold temperature too low or high"

"P0115","Coolant temperature - no valid signal or low or high"

"P0120","Throttle position high or low "

"P0130","Oxygen sensor - no valid signal"

"P0135","Front O2 sensor heater short to battery or ground or open "

"P0136","Rear oxygen sensor rich or lean too long or no vlid signal "

"P0141","Rear O2 sensor heater short battery or ground oropen "

"P0170","Oxygen sensor rich or lean too long"

"P0201","Injector A fault"

"P0202","Injector B fault"

"P0203","Injector C fault"

"P0204","Injector D fault"

"P0230","Fuel pump relay shorted to battery or ground oropen"

"P0325","Knock sensor bad connection or loss of 58 x signal or incorrect 58x signal"

"P0335","Terninal 58 "

"P0342","CAM sensor signal low "

"P0343","CAM sensor signal high"

"P0351","EST 1 short to battery or ground or open "

PDF 文件使用 "pdfFactory Pro" 试用版本创建

ÿ

www.fineprint.com.cn

深 圳 市 元 征 科 技 股 份 有 限 公 司

LAUNCH TECH CO., LTD.

深圳市元征软件开发有限公司 LAUNCH SOFTWARE DEVELOPMENT CO.,LTD.

地址:518112 广东省深圳市龙岗区坂雪岗工业区五和大道北元征工业园

ADD:

LAUNCH INDUSTRIAL PARK,NORTH OF WUHE ROAD,BANXUEGABF,LONGGANG DISTRICT, SHENZHEN,P.R,CHINA.

电话

TEL:86-755-84528427 传真 FAX:86-755-84528454

保留一切解释权，处置权，包括复印及传达至第三方。

编写：黄惠生 2008-9-11 15:01 第 65 页 总 274 页

"P0352","EST 2 short to battery or ground or open"

"P0400","LEGR system functionality test failure"

"P0443","CCP short to battery or ground or open"

"P0480","Fan 1 shorted to battery or ground oropen"

"P0481","Fan 2 shorted to battery or ground oropen"

"P0482","Fan 3 shorted to battery or ground oropen"

"P0500","Vehicle speed sensor not valid"

"P0505","IAC error "

"P0560","Battery voltage too high"

"P0602","KW2000 not secured or service ECM in use"

"P0607","Knock system failure"

"P0650","Malfunction indicator lamp shorted to battery or open orground "

"P1230","Main Power Relay shorted to battery or ground"

"P1405","LEGR pintle position test failure "

"P1530","AC relay shorted to battery or ground or open "

"P1604","EEPROM error"

"P1610","Immobilizer ECU error or ECM-immobilizer communition error "

"P1640","QDSM memory error "

"P2000","Front evaporator temperature high or low "

"P2001","Rear evaporator temperature high or low"

"P2100","Rear Loop Cutoff solenoid shorted to battery or ground "

"P2200","MAPCID failure"

3.1.3 联合电子发动机系统

;0x4661
"P0016","Crankshaft Position-Camshaft Position Correlation Bank 1 Sensor A"
"P0030","O2 Sensor Heater Contr. Circ.(Bank1(1)Sensor 1)"
"P0031","O2 Sensor Heater Contr. Circ.(Bank1(1)Sensor 1) Low"
"P0032","O2 Sensor Heater Contr. Circ.(Bank1(1)Sensor 1) High "
"P0036","O2 Sensor Heater Contr. Circ.(Bank1(1)Sensor 2)"
"P0037","O2 Sensor Heater Contr. Circ.(Bank1(1)Sensor 2) Low"
"P0038","O2 Sensor Heater Contr. Circ.(Bank1(1)Sensor 2) High "
"P0053","O2 Sensor Heater Resistance(Bank1(1)Sensor 1)"
"P0054","O2 Sensor Heater Resistance(Bank1(1)Sensor 2)"
"P0101","Mass or Volume Air Flow Circ. Range/Performance"
"P0102","Mass or Volume Air Flow Circ. Low Input"

PDF 文件使用 "pdfFactory Pro" 试用版本创建

ÿ

www.fineprint.com.cn

深 圳 市 元 征 科 技 股 份 有 限 公 司

LAUNCH TECH CO., LTD.

深圳市元征软件开发有限公司 LAUNCH SOFTWARE DEVELOPMENT CO.,LTD.

地址:518112 广东省深圳市龙岗区坂雪岗工业区五和大道北元征工业园

ADD:

LAUNCH INDUSTRIAL PARK,NORTH OF WUHE ROAD,BANXUEGABF,LONGGANG DISTRICT, SHENZHEN,P.R,CHINA.

电话

TEL:86-755-84528427 传真 FAX:86-755-84528454

保留一切解释权，处置权，包括复印及传达至第三方。

编写：黄惠生 2008-9-11 15:01 第 66 页 总 274 页

"P0103","Mass or Volume Air Flow Circ. High Input "
"P0105","Manifolt Absolut Pressure/Barometic Pressure Circuit "
"P0106","Manifold Abs.Pressure or Bar.Pressure Range/Performance"
"P0107","Manifold Abs.Pressure or Bar.Pressure Low Input"
"P0108","Manifold Abs.Pressure or Bar.Pressure High Input "
"P0112","Intake Air Temp.Circ. Low Input"
"P0113","Intake Air Temp.Circ. High Input "
"P0116","Engine Coolant Temp.Circ. Range/Performance"
"P0117","Engine Coolant Temp.Circ. Low Input"
"P0118","Engine Coolant Temp.Circ. High Input "
"P0121","Throttle/Pedal Pos.Sensor A Circ. Range/Performance"
"P0122","Throttle/Pedal Pos.Sensor A Circ. Low Input"
"P0123","Throttle/Pedal Pos.Sensor A Circ. High Input "
"P0130","O2 Sensor Circ.,Bank1-Sensor1 Malfunction"
"P0131","O2 Sensor Circ.,Bank1-Sensor1 Low Voltage"
"P0132","O2 Sensor Circ.,Bank1-Sensor1 High Voltage "
"P0133","O2 Sensor Circ.,Bank1-Sensor1 Slow Response"
"P0134","O2 Sensor Circ.,Bank1-Sensor1 No Activity Detected "
"P0136","O2 Sensor Circ.,Bank1-Sensor2 Malfunction"
"P0137","O2 Sensor Circ.,Bank1-Sensor2 Low Voltage"
"P0138","O2 Sensor Circ.,Bank1-Sensor2 High Voltage "
"P0140","O2 Sensor Circ.,Bank1-Sensor2 No Activity Detected "
"P0170","Fuel Trim,Bank1 Malfunction"
"P0171","Fuel Trim,Bank1 System too Lean"
"P0172","Fuel Trim,Bank1 System too Rich"
"P0201","Cylinder 1- Injector Circuit "
"P0202","Cylinder 2- Injector Circuit "
"P0203","Cylinder 3- Injector Circuit "
"P0204","Cylinder 4- Injector Circuit "
"P0219","Engine Overspeed Condition "
"P0221","Throttle/Pedal Position Sensor/Switch B Range/Performance"
"P0222","Throttle/Pedal Position Sensor/Switch B Low Input"
"P0223","Throttle/Pedal Position Sensor/Switch B High Input "
"P0261","Cylinder 1- Injector Circuit Low "
"P0262","Cylinder 1- Injector Circuit High"
"P0264","Cylinder 2- Injector Circuit Low "
"P0265","Cylinder 2- Injector Circuit High"
"P0267","Cylinder 3- Injector Circuit Low "

PDF 文件使用 "pdfFactory Pro" 试用版本创建

ÿ

www.fineprint.com.cn