Chery A18. Manual — part 87
127
III. Disassembly & assembly of the right front compartment wiring harness
Part No.:A18-3724290
(I).Preparation
Tools:
Ring wrench 10#, Phillips screwdriver, slotted screwdriver
(II).Attentions
Firstly cutting the power is a must before disassemble
electric components & wiring harness
The ignition switch must be in a close state.
(III).
Disassembly steps
1. Please take out the plug-in unit of the right turning lamp
2. Please use the lifter to lift the car
3. Please take out the plug-in unit of the right front fog
lamp from the underside of the front bumper
4. Please take out the plug-in unit of the right headlamp
128
5. Please take out the plug-in unit with the horn from the
under side of the front bumper
6. Please take out the plug-in unit of the air conditioner
clutch
7. Please disassemble the negative electrode earthed wire
at the right side with the wrench 10#
8. Please take out the plug-in unit of the air conditioner
high pressure & low pressure switch
9. Please take out the rubber protective cover
129
10. Please take out the plug-in unit with the wiring harness
of the inside floor and take out the wiring harness
assembly of the right front compartment
(IV).
Assembly steps
Assemble according to the inverted sequence of the
disassembly
130
Section III Electrical Spray Wiring Harness of the Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст