Chery A18. Manual — part 101

14

Section 4 Adjustment and replacement of manual brake

1. System constitution diagram

1-Handle 2-Fixed bolt 3-Bracing wire 4, 5-Bracing wire of left and right rear wheel

2. Preparation

Tools: Ratchet wheel, ratchet pole, 10#, 13#, 14#, 16# sleeve, 10#, 13#, 14# box wrench, jaw vice, torque wrench,

flatheaded screwdriver.

3. Precautions

3.1

Please wear necessary appliances for labor protection to avoid of accident.

3.2

While disassembling or assembling elastic cell, please prevent it springing out to injure human as much as

possible.

3.3

While disassembling and assembling near blast pipe, please wait for refrigeration to avoid of scald.

4. Disassembling and assembling step

4.1

Referring to disassembly and assembly of rear brake,

loose manual brake cable of rear wheel.

15

4.2

Disassemble circlip on position shown in the figure

and pull out brake bracing wire.

4.3

Disassemble steady rest bolts of manual brake cable

on position shown in figure with inner hexagonal

socket

Moment of force: 9-12 N·m

16

4.4

Disassemble the manual brake cable on another side

in same method.

4.5

Disassemble fixed bolt of driver seat with 17# sleeve

and bring out seat.

Moment of force: 25±3N·m

4.6

Pry up protecting cover of screw nail of rear cover

sheet with flatheaded screwdriver and disassemble

screw nail of coversheet of amplitude-panel

assembly.

Bolt moment: 6±1 N·m

4.7

Disassemble leather sheath of manual brake.

17

4.8

Loosen fixing nuts of two backstay cables with 10#

box wrench. (Adjust hand-braking path via adjust

bracing wire of the position.)

Moment of force: 20-26 N·m

4.9

Disassemble fixed nuts of brake handle with 15# box

wrench.

Moment of force: 30±3 N·m

4.10 Pull out sensor wire of manual brake.

4.10 Draw out manual brake cable from underside of

vehicle body.