Chery A18. Manual — part 96
163
18. Take out the wiring harness plug-in unit with the
right front compartment.
19. Take out the plug-in unit connecting with the right
front door.
20. Unscrew 2 bolts of the safety with the combined
wrench 17# (See the disassembly of the safety belt),
then unscrew the touch switch of the right rear door
and then take out the plug-in unit of the touch switch
with the right rear door.
21. Take out the plug-in unit of the touch switch with
the front door
164
21. Prize up the protective cover of the electronic fuel
pump with the slotted screwdriver and then take out
the plug-in unit with the fuel tank
22. Open the rear door, and take out the plug-in unit
with the right trunk lamp
23. Take out the plug-in unit with the right tail lamp
165
24. Take out the plug-in unit with the backup lamp
(IV).
Assembly steps
Assemble according to the inverted sequence of
the disassembl
166
Section IX Wiring Harness of the Rear Trunk Door
I. Wiring harness sketch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст