Chery A series. Manual — part 128

OPERATION INSTRUCTION

Tape playing

1. Press POWER button to switch on the power, and rotate to the right to increase the
volume.

2. Face the tape open side to the right. Push it into the cassette door No.18 to lock position,

and the player begins to work. At this moment, the display No.9 shows the tape is playing.

3. If there is already a tape in the cassette player, press the SOURCE button selecting the tape

as the source, and start to play the tape.

4. The tape will automatically reverse and continuously to play when it comes to the end, or

you can press button No.17 to manually reverse it.

5. In order to quickly select the song that you want, press fast forward button or fast

⑦

backward button for quick play forward or backward, and then press another fast

⑥

backward button or fast forward button slightly, the tape will enter into the play mode.

6. If you want to stop the play or change the tape, press the tape eject button No.17, the tape

will eject from the cassette player.

Radio

1. Power switch, volume control, tone adjustment and playback mode.

2. Press BAND button to select the desired band. The display No.9 will show the band to

receive. You can select the one of following bands as you wish: FM1, FM2, FM3, FM AST,
MW (AM) AST, MW (AM) 2, and MW (AM) 1.

Note: You can cancel the MW (AM) band if you do not want to listen to it.

If you do not want to listen to the excessively preset FM or MW (AM) stations, you can
cancel some of them correspondingly.

3. Manual and automatic tuning (selecting stations):

(1) If you want to enter manual tuning mode, please press the SETUP button to enter into the

set mode and select “TUN” item, after that set it in “MAN” Mode. The radio will
maintain the manual tuning mode.

(2) Press the tuning button continuously to tune to the lower frequency end station, or

press the tuning button

to the high frequency end station.

(3) Press the button continuously or

for more than 0.5 second, the player will

complete its automatic tuning till the broadcasting station is received. Repeat step〈1〉or
〈

2〉, you will receive the broadcasting program that you want.

4. Automatic scanning:

If you press the SCAN button for 2 seconds, you can initiate the start/stop automatic scan
function of the player. The player will automatically scan the stations from low to high end

T-70

starting from the initial frequency point. When one station is locked in, the player will pause
the scanning. The frequency of the station will flash for 10 seconds while broadcasting the
program of the tuned station. After that it will continue to scan the higher frequency end till it
reaches the highest end and return automatically. It will then scan from the lowest to the
higher end again.

If you want to listen to any program of a particular station, you just need to press the SCAN
button when the frequency of the station is flashing, the scanning will stop at the position of
the station immediately. If you press the SCAN button again, it will go back to the automatic
scanning mode.

Memory of the station frequency

You can store up to 6 station frequencies in advance with 1 to 6 preset buttons under each
mode of FM1, FM2, FM3 and AM.

1. Manual storing

When you want to use automatic searching mode to search for a particular station, press
anyone of the 1-6 preset buttons for more than 2 seconds, and after hearing the voice from
strong to weak and from weak to strong again, it means that this station frequency has been
stored in the preset button that you have pressed.

When storing the stations of FM, the related RDS information and AF mode (on/off) are also
been stored together.

2. Automatic storing

You can automatically store 6 strongest FM stations in the FM AST band or 6 stations in the
MW（AM）AST band.

Press button AST to enter into the automatic storing mode, the player will make a voice of
“hua”, and then becomes mute.

After storing, you will hear the voice of “hua” again, and you start to listen to the station of
the preset button 1.

CD player

1. This player can be connected to VDO CD player, -CDC 401 A or CDC 601 A or CDC 603

A or CDC1001 A.

2. Press button SOURCE selecting CD player as voice source.

3. Press button DISC+ or DISC- to select the disc you want. After finishing one disc, the

player will automatically turn to the next one to continue playing. If the empty disc is
encountered, it will skip automatically.

4. Press button or to select the song that you want, and start to play from the selected
song.

T-71

OTHER FUNCTIONS
Sound setting

1. Press the SOUND button for at least 2 seconds to enter into the SOUND setting mode.

2. Press the SOUND button to select the desired sound effect mode.

-BASS (bass, under the BASS-TREB mode)

-TREBLE (treble, under the BASS-TREB mode)

-BALANCE: The left and right volume balancing

-FADER: Front and back speaker control

-LOUDNESS (off, bass, mediant, treble, under the BASS-TREB mode)

3. The sound effect mode which could be selected by rotating the volume button. After 5

seconds, the display will return to the last operation mode automatically.

Sound effect setting

Short press the SOUND button to select a sound effect preset by the manufacturer.

-BASS-TREB: You may set the bass or treble of the player by yourself.

-JAZZ: Jazz music

-VOCAL: Voice

-POP: Pop music

-CLASSIC: Classic music

-ROCK: Rock and roll

Clock setting (manual)

1. Short press the SETUP button to enter into the SETUP menu.

2. Press button

turning to the “TIME” item.

3. Press the SETUP button to select the “12H” or “24H”.

4. Press button

to select the hour position.

5. Press the SETUP button to adjust the hour position.

6. Press button

to select the minute position, and the minute position will start to flash.

7. Press the SETUP button to adjust the minute. The time will start from the setting time.

8. Press the SETUP button for at least 2 seconds to exit the SETUP menu.

- If the clock mode has been activated, the display will show the time after operating any

button for 10 seconds.

T-72

REMOVAL/INSTALLATION OF SOUND SYSTEM

The sound system includes sound source, speaker and antenna. The sound source includes
recorder assembly, optional CD player assembly and VCD player assembly. The CD player
assembly and VCD player assembly includes the host, power signal line and disks exchanger.

1. INSTALLATION OF THE RECORDER ASSEMBLY

z Disconnect the negative grid of the battery.

z Install the hardware frame into the sub-instrument frame, and using a flat screwdriver to

open the top, bottom, left and right locking plates of the frame;

z Connect the power supply wire, control wires, signal and antenna wires at the back portion
properly;

z Push the playing machine into the mounting frame evenly with your thumbs and

forefingers resting on the left and right of the control panel, till you hear the sound of the
locking plates from both sides of the player.

2. INSTALLATION OF ANTENNA

z Disconnect the negative grid of the battery.

z Install the antenna on the installation hole and align it with the vehicle body;

z Fasten it with washers and non-standard nuts, and connect the conducting wires properly;

z Place the front end of the antenna wiring harness until it reaches the rear of the recorder,

and plug the rear end of the antenna wiring harness into the socket of the antenna;

z Bind the antenna wiring harness along the interior left-hand wiring harness.

3. INATALLATION OF FRONT SPEAKER

z Disconnect the negative grid of the battery.

z Connect the connectors of the wiring harness.

z Place the wiring connection of speaker into installation hole towards the left and fasten it

by turning it towards the right side (note: the connection terminals must face the indoor
after placing the speaker, so as to prevent the panel beating from short circuit. The speaker
should face towards the driver seat);

z Align it at the correct direction and press the speaker cover into it.

4. INSTALLATION OF FRONT DOOR SPEAKER

z Connect the wiring harness properly, and place the speaker plugs upside down into the

speaker mounting position of the door protection guard. After that, mount the speaker
properly;

z Fasten 4 self-tapping screws;

T-73