Chery B11. Manual — part 116
Two. Structure drawing of front axle
Bolt
Nut
Clamp
Joint
plate
assembl
Connecti
ng rod
assembly
Stabilizer bar
assembly
Control
arm
Bowl
washer
Bolt
Front axle
assembly
Bolt
Three. Fixing and unfixing of front
wheel rocker arm
Tools required: 13#, 15# and 8# sockets,
15# spanner, short joint bar, torque
spanner, quick spanner.
Unfixing steps:
1. Jack up the auto with a jack and
dismantle the wheel.
2. Release the set bolts connecting the
front connecting rod and the rocker arm
and take out the front connecting rod.
3. Release the set bolts for the rocker
arm and the horn.
4. Release the set bolts for the rear gum
cover of rocker arm and the front axle.
5. Release the set bolts for the gum
cover of lower rocker arm and front axle.
Release the three joint bolts of rear
①
bracket.
Avoid detaching the lower rocker arm
②
while releasing the bolt.
6. Unfix the lower lever off the auto.
Fixing steps:
1. Fix with reference to the unfixing
steps.
2. Note:
Released set bolts which are
①
subject to
yielding limit in terms of torque + angle
fixing during bolting must be replaced.
Fasten the bolts with the required
②
torque.
Four. Fixing and unfixing of front
connecting rod of front wheel
equalizer bar
Tools required: 15# socket, quick
spanner
Unfixing steps:
1. Release the set bolts for the
connecting rod and the equalizer bar.
2. Release the set bolts for the front
connecting rod and the rocker arm.
Fixing steps:
1. Fix with reference to the unfixing
steps.
2. Note:
Released set bolts which are subject to
①
yielding limit in terms of torque + angle
fixing during bolting must be replaced.
Fasten the bolts with the required
②
torque.
Five. Fixing and unfixing of front
connecting rod bushing
Tools required: 15# and 18# spanners,
hammer
1. Release the set bolts which connect
the left and right front connecting rods
with the equalizer bar.
2. Release the set bolts for the left and
right connecting rod bushings.
3. Release the fixing jaw of equalizer bar
bushing and move the equalizer bar
forward to take out the bushing.
Fixing steps:
1. Fix with reference to the unfixing
steps.
2. Note:
Released set bolts which are subject to
①
yielding limit in terms of torque + angle
fixing during bolting must be replaced.
Fasten the bolts with the required
②
torque
Six. Fixing and unfixing of front
connecting rod
Unfixing steps:
1. Unfix the front axle (refer to Fixing
and Unfixing of Front Axle)
2. Release the four set bolts on equalizer
bar bushing and take down the equalizer
bar.
Fixing steps:
1. Fix with reference to the unfixing
steps.
2. Note:
Released set bolts w
①
hich are subject to
yielding limit in terms of torque + angle
fixing during bolting must be replaced.
Fasten the bolts with the required
②
torque
Seven. Fixing and unfixing of front
axle assembly
Tools required: 18, 19, 21 # sockets, 15#
spanner, short connecting rod, torque
spanner
Unfixing steps:
1. Release the three set bolts for the front
exhaust pipe and engine manifold
exhaust pipe.
2. Release the
two set bolts for
the front
exhaust pipe
and three-way
catalytic
converter.
3. Release the
two fixing lugs of the exhaust pipe and
take out the front exhaust pipe.
4. Release the set bolts for the front
connecting rod and equalizer bar.
5. Unfix left and right rocker arm (refer
to Fixing and Unfixing of Rocker Arm).
6. Release the four set bolts of the
steering gear and the front axle.
7.
Release t
gear and the engine bracket in the
front axle.
he set bolts for the steering
8. Release the four set bolts of the front
axle.
Screw off the set bolts
①
of the front
axle (1) (2) (3) (4).
Take down the front axle.
②
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст