Chery B11. Manual — part 22
Door Lock and Anti-theft
89
hood, or truck hood is delayed to be closed,
the alarm system will go to working status
after 20 second after closing.
Remote controller battery
replacement
If the remote controller working distance
get shorter and shorter, you should replace
its battery (battery model 3V CR 2032) by
the following steps:
1.Open the controller unit by using
screwdriver tool from the side buckle.
2. Take battery out carefully. Put new
battery in with its icon (+) upward.
3.Put controller unit back in reverse step
for disassembly.
Used lithium battery can not be
thrown away as normal home rubbish. It
should be thrown ,according to the
respective environmental protection
guideline.
Driving
90
Seat and Protection
Seat
Correct sitting posture
The seats, head restraints, safety belts and
airbags are all helpful for protecting
passengers. Fully utilizing them can
benefit the passengers, thus please comply
with the following points:.
Ÿ
Seated upright, try to lean your back
bottom to backrest if possible,but
should not exceed 30 degrees.
Ÿ
Adjusting the head restraints to get
the same height as your head.
Ÿ
Front seat should not be too much
close to instrument panel. While
driving, the driver should bend a
little his/her arm to grasp the steering
wheel,the driver should also bend a
little his/her foot, so that he/she can
step entirely on the pedal.
Ÿ
The shoulder safety belt should cross
middle of shoulder and then closely
and tightly cross chest. Please do not
cross it through the neck. The lap
safety belt should close to hip rather
then stomach.
Please do not adjust seat
while driving.
Max. 30
°
Driving
91
Front passenger seat
adjustment
Frontward and backward moving
the seat
Draw up the adjusted pole beside seat if
you want to move seat frontward and
backward ,until it is in the comfortable
position. Then you can release the pole
and shake the seat to see if it is locked into
the track.
Adjusting Backrest gradient
Please lean your body to the backrest, and
then push the adjusted pole; you can adjust
the backrest gradient by adjusting your
body gradient.
Driver power seat adjustment
There is control panel on one side of the
driver seat. It can control to adjust the seat
in 8 different ways. (Come and back every
time is considered as two ways, there are
together 4 movements), there are two
operational switches on the panel, which
function is shown as the illustrations.
Switch 1: It is used to adjust backrest
gradient
Ÿ
Push the switch frontward by your
finger, the backrest can lean
frontward, push the switch reversed;
it can lean in opposite direction.
Switch 2: It is used to adjust backrest
front / back position, front/back part
of cushion going up/down.
Switch 2
Switch 1
Seat adjust pole
Backrest adjust
pole
Driving
92
Ÿ
Push the switch frontward, the seat
moves to the front. Push the switch
backward , the seat moves to the
back
Ÿ
Push up the front side of the switch,
the front side of the cushion moves
up. On the contrary, push down the
front side of the switch, the front side
of the cushion moves down.
Ÿ
Push up the back side of switch, the
back side of cushion moves up. On
the contrary, push down the back
side of switch, the back cushion
moves down.
The vehicle might
be out
of control if you
adjust all these switches while driving.
Thus, the adjustment can only be done
while it is stopped.
While driving, it
does
not allow
passengers to touch these switches ,in
order to avoid movement of driver
seat, which can cause vehicle out of
control or accident.
Adjusting waist-rests
The waist-rest adjusted pole is on one side
of backrest. Turning this pole can adjust
waist-rest.
The waist-rest is up if the pole points
frontward. If the pole points upward, the
waistrest comes back.
Waist-rest adiusted
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст