Chery B11. Manual — part 160
Chery Eastar Service Manual Body Dimension and Accessories
94
The clearance between the boot cover and rear bumper reduces gradually from 8 mm to 4.3±1 mm
corresponding to the points from G to H at A11-A11.
The clearance between the boot cover and tail lamp increases gradually from 2.2 mm to 2.8 mm
corresponding to the points from J to K at A6-A6 and reduces gradually from 2.8 mm to 2.4±2 mm
corresponding to the points from K to H.
Rear bumper
Boot cover
Reduce gradually from 8 mm to 4.3±1 mm
corresponding to the points from G to H
Boot cover
Rear bumper
Boot cover
Increase gradually from 2.2 mm to 2.8 mm
corresponding to the points from J to K
reduce gradually from 2.8 mm to 2.4 mm
corresponding to the points from K to H
PDF created with pdfFactory Pro trial version
Chery Eastar Service Manual Body Dimension and Accessories
95
The clearance between the tail lamp and rear bumper is 3±1 mm at A7-A7. and its assembly tolerance
is 2±2 mm.
The clearance between the boot cover and rear bumper is 8±2 mm at A5-A5. and the clearance
between the rear license plate trim and boot cover is l±l mm, and its assembly tolerance is 1
5
.
0
5
.
1
+
−
.
Rear bumper
Rear bumper
V direction
Boot cover
Rear license plate orna
(Circumferential)
C
ir
cu
m
fe
re
n
ti
al
+
1
PDF created with pdfFactory Pro trial version
Chery Eastar Service Manual Body Dimension and Accessories
96
The assembly tolerance between the tail lamp and rear bumper is 0±1.5 mm at D7.
The clearance between the tail lamp and rear fender is 2±1 mm at A8-A8. and its assembly tolerance is
0.2 mm.
Rear fender
Tail lamp
Rear bumper
Tail lamp
Boot cover
PDF created with pdfFactory Pro trial version
Chery Eastar Service Manual Body Dimension and Accessories
97
Boot cover
Tail lamp
W direction
PDF created with pdfFactory Pro trial version
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст