Chery Tiggo T11 LHD. Manual — part 15
Chery T11 Service Manual
Body and Accessories
-58-
Crosssection A2-A2, requirements on clearance and levelness.
Crosssection A3-A3, requirements on clearance and levelness.
Crosssection A4-A4, requirements on clearance and levelness.
Fender
Engine hood
Chery T11 Service Manual
Body and Accessories
-59-
Crosssection A5-A5, requirements on clearance and levelness.
Crosssection A6-A6, requirements on clearance and levelness.
Crosssection A7-A7, requirements on clearance and levelness.
Fillet
Engine hood
Rotation
Turning light
Cover
Engine hood
Front bumper
Chery T11 Service Manual
Body and Accessories
-60-
5. Dimension of Body
Side View
Chery T11 Service Manual
Body and Accessories
-61-
Where: The levelness from point a to b shall be evenly changed from 0 to 1, and the levelness
from point c to b shall be evenly changed from 1 to 0.
The clearance from point f to c shall be evenly changed from 6 to 7, and the levelness
from point g to h shall be evenly changed from 1 to 0.
The levelness from point k to j shall be evenly changed from 0 to 1.
The tolerance of clearance between front and back doors at MN, NP sections shall be
within 1.2mm.
Crosssection B1-B1, requirements on clearance and levelness.
Crosssection B2-B2, requirements on clearance and levelness.
Fender
Side wall
Side wall
Front rear door
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст