Chery Tiggo T11 LHD. Manual — part 117

Chery International Door Lock and Anti-theft

The height of driver-side seat is
adjustable. During adjustment, turn the
adjusting knob frontward to lift up the
seat, and turn it backwards to fall the
seat.

It may make the vehicle
fail to control and result

a traffic accident if you adjust
the seat switch during driving.
So, the seat switch can be
adjusted only while the vehicle
stops.

Do not let the non-driver
to

conduct

the

adjustment during driving so as
to avoid creating the movement
of driver’s seat, which may make

the vehicle fail to control and
result a traffic accident.

Head restraint

The head restraint can restrict your
head movement to protect your
cervical vertebrae if your vehicle is
impacted by the other vehicle during
driving. However, the head restraint
can be able to protect you only when it
is adjusted to a correct position.

Front head restraint

There are some head restraints
installed on the backrests of front
seats, and the height of these
restraints is adjustable. The passenger
shall adjust the head restraints of
seats to the proper height according to
her/his body height so that the head
restraints can protect you effectively.

Spring clamp

Chery International Door Lock and Anti-theft

Head restraint adjustment
method:

Grasp the both sides of a head
restraint by your both hands, and pull
the head restraint upwards or push it
downwards;

The optimal height of a head restraint
is to make its top flush with the top of
your head.

Head

restraint

assembly/disassembly
method:

When the head restraint is
disassembled, press the spring clamp
on the outside of head restraint’s
guide member by hand, and, at the
same time, pull out the head restraint
from the guide member; when the

head restraint is assembled, the head
restraint of front/rear seat shall be
differentiated firstly (the pin of the
head restraint of front seat is arc, and
there is a straight bar in the bottom of
pin of rear seat’s head restraint), and
then push the pin of head restraint into
the guide member until the spring
clamp on the guide member engages
with the pin correctly.

Rear head restraint

The adjustment, assembly and
disassembly method of the rear head
restraint is the same as the
corresponding method of the front
head restraint.

Head

restraint

adjustment:

Do not remove the head restraint
or adjust it too low for fear that
your neck is injured because your
head is short of support when an
impact occurs. The head restraint
shall be adjusted to a proper
position.

Rear seat

The adjustment method of frontward
or rearward movement of the rear seat

Chery International Door Lock and Anti-theft

is the same as the adjustment method
of the front seat.

Adjust the inclined angle of
seat backrest

Please make your body contact the
seat backrest firstly, and then pull out
the adjusting rings located in the both
sides of the head restraint (the pulling
ring is shown as the arrow in the figure
above). Change the inclined angle of
your body to adjust the backrest to
your desired angle, and then release
the pulling ring.

Delivery of luggage

The luggage and other
loaded goods shall be

places in the front part of boot

as soon as possible. It is very
dangerous that the vehicle is
running under the condition of
the end door open, in the case,
the excessive exhaust gas will
be inhaled into the vehicle
through the end door opened.

If the goods must be
placed in your vehicle,
please fix it reliably to

avoid it moving.

Seat belt

The seat belts/child safety seats must
be applied at any moment. Do not
share one seat belt simultaneously
with multiple persons. Make sure that
the belt is fastened well, without
looseness, distortion and barrier.

The driver and passenger

Chery International Door Lock and Anti-theft

on the front seats shall fasten the
belt well during driving.

Do not put on too loose-
bodied and thick clothes

A.S.A.P. To obtain the best
protection effect, the seat belt
shall adhere to your body tightly.

After the vehicle begins to move, do
not let the child sit on the lap of the
adult. The adult can not protect the
child free from injury when a traffic
accident occurs.

Seat belt warning lamp

The warning lamp shall light when the

ignition switch is turned on. The lamp
will keep lighting to remind the
passengers to fasten their seat belts.

Fasten the seat belt tightly

Pull out the belt smoothly and steadily.
The belt may be locked if the pulling
force is too large or the vehicle is in a
slope. The seat belt shall be placed on
the center of your outside shoulder.
The waist part of the belt shall adhere
to your hip tightly other than your
stomach.

Insert the tongue plate
into the belt buckle until

you hear the Click sound,
otherwise, the belt is not locked
correctly.

To release the belt, press the red
button on the belt buckle and make
the belt draw back smoothly.

Make sure that each seat belt is
equipped with a correct belt buckle.

If it is difficult to pull out
the belt, please pull it

once by force and then release
it. To do so, the safety belt can
be pulled out smoothly.