Chery A15 / 480 LHD model. Manual — part 55
INSPECT
THE
BODY BY
USING
THE
FRAMEWORK
OF SPECIAL
MEASUREMENT SYSTEM (Fixed mechanical tools are to be used during inspection)
SUNROOF
BRIEF INTRODUCTION OF SUNROOF’S MODEL AND FUNCTION
The agate super 300 auto sunroof, which is a new generation product manufactured by
German Webster Auto Sunroof Manufacturing Company, is the new option sunroof of Chery
A15 sedan.
Agate super 300 medium size electric sunroof
Equipment
Interior trim casing with rolling-up sunshade.
Function
Anti obstruction mechanism, memory, automatic close and etc.
Type
Outward opening sunroof
Sliding opening
250mm
Tilt height
52mm
Outline dimension
803×370mm
Applicable type
SQR7160/SQR7162
It is designed with the extreme large sliding distance and
inclining angle, further to insulate more than 99.9% of
ultraviolet radiation and 96% heat by employing the 10#
strengthened safety crystal glass of gray greenish color.
The good looking computer control panel features
with powerful functions as pre-program of glass
opening position, automatic closing in case of
engine switch-off, and anti obstruction device.
High quality roll-up sunshade is
capable to be put at any position.
PARTS OF SUNROOF
PARTS LIST OF SUPER 300
Position
Name
1
Glass panel
2
Glass panel fastening device
3
Guide bolt
4
Mechanical devices left / right
5
Seal
6:7
Interior trim rim with gray sunshade
6:7
Interior trim rim with beige sunshade
8
Sunroof motor
9
Sunroof module
10
Cover of control buttons
11
Upper frame
12
Interior fastening frame
13
Wind strip
14
Sunshade assembly
15
Harness
16
Rack + pinion / cover
17
Fastening bolts
1. GLASS PANEL
One of main parts of sunroof, is installed on the mechanical device, and airproof with the
seal of upper frame.
2. UPPER FRAME
Plastic part is used to support the mechanical devices and the glass panel, and achieve
good airproof with the body.
3. MECHANICAL DEVICES
Main parts of sunroof are installed on the upper frame with one on each side. They are the
actuators for sunroof glass inclining and opening. The glass panel is installed on the
mechanical devices.
4. MODULE MOTOR ASSEMBLY
The sunroof control panel is mounted on its surface, all programs to perform various
sunroof functions and motor actions are stored in the module’s memory, and the motor is
the drive source for the sunroof opening and closing.
5. RACK + PINION
Installed on the upper frame with one on each side, one end is connected to the motor,
another end is connected to the mechanical devices, and transmits the power from the
motor to the mechanical devices evenly to open or incline the sunroof.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст