Chery A15 / 480 LHD model. Manual — part 101

The spare parts should be taken out from its packing only before the assembly. Any
part without proper packing is not allowed to be used;

Pay attention not to damage the O ring while assembling the fuel injector. A small
amount of lubricating oil should be applied on the O ring for assembly convenient.

After the system has been opened up, as far as possible not to use compression air and
move the car around.

SAFETY MEASURES

Attention should be paid to the followings so as to avoid the injury of personnel and
damage of the fuel injectors and the ignition device:

(1) If the engine is running or at the start up speed, then it is not allowed to contact or

disconnect the ignition wiring harness;

(2) If the engine is driven by the starting motor instead of starting by itself, such as in

the case of inspecting the compression pressure, then the wiring harness
connectors should be disconnected from the Hall Sensor and crankshaft position
sensor.

˄

˅

!

"

"

"

""

""

"

#

"

"

"

"

"

$

%

"

"&

ˈ

"&

&

"

'

(

"

'

(

'

(

'

"

(

'

"

(

)

'

"

(

'

"&

(

&

'

(