Chery QQ6 (S21) / S12LHD. Manual — part 223
Chapter Three Special Tools
I. Connotation of Special Tool Number
In order to know or find the tool clearly according to parts number and improve maintenance
efficiency, special tools numbering is stipulated as follows:
□□□□□ ○ ○ ○ ○ □
□ indicates a letter ○ indicates an Arabic numeral
Nomenclature of the tool: for a standard part, please use the brand and model recommended by
Chery company as reference. For example, CH indicates a non standard part, which means it is a
special tool for repair of this part verified by After Sales Service Department of Chery Automobile
Sales Co., Ltd. HAZET indicates a standard tool produced by this company.
Connotation of system code corresponding to the tool:
Number
Position
1
Chassis
2
Engine
3
Transmission
4
Accessory
5
Body
Corresponding series number of tools: from 001 to 999.
Times of modifications of the tool:
Number
Modification
A
First modification
B
Second modification
C
Third modification
D
Fourth modification
Note: In alphabetical order. Bigger SN means more modification times.
For example: CH-1002A means it is the 2# special tool for repair of chassis system that has been
verified by After Sales Service Department of Chery Automobile Sales Co., Ltd., who commits
Please use the special tools that we designated to perform maintenance, otherwise it
will cause accident or damage the machine.
Maintemance times coresponding to tools
SN coresponding to tools
System code coresponding to tools
Tools name
production of this tool to other manufacturer. This tool is of the first modification.
HAZET-6290-1CT means it is a standard tool produced by HAZET company with its model
as 6290-1CT.
II. Special Tools Chart
CH-20002
Installation tool for camshaft oil seal:
used to install camshaft oil seal.
Same as A5
CH-20003
Engine timing tool: used to time
crankshaft.
Same as A5
CH-20004
Adaptor: used to install and remove
valve spring (match with Eastar special
tool MLR-MD998772A).
Same as A5
CH-20005
Installation tool for crankshaft rear oil
seal: used to install crankshaft rear oil
seal.
Same as A5
CH-20006
Installation handle for crankshaft rear
oil seal: used to install crankshaft rear
oil seal.
Same as A5
CH-20007
Installation sleeve for crankshaft front
oil seal: used to install crankshaft front
oil seal.
Same as A5
CH-20008
Installation sleeve for crankshaft front
oil seal
Same as A5
CH-20009
Locating tool for flywheel: used to
locate flywheel.
Same as A5
CH-20010
Camshaft timing tool: used to time
camshaft.
Same as A5
CH-20011
Installation tool for camshaft oil seal:
used to install camshaft oil seal.
Same as A5
CH-20012
Valve oil seal guide sleeve: used to
install valve oil seal.
Same as A5
CH-20013
Valve oil seal remover: used to remove
valve oil seal.
Same as A5
CH-20015
Belt pulley bolt remover: used to
remove belt pulley clip.
Same as A5
CH-20017
Installation tool for valve keeper: used
to install valve keeper.
Same as A5
CH-20018-A
Valve spring remover: used to remove
valve spring.
Same as A5
Recommended tools
Loop wheel machine: used to raise engine.
Engine maintenance workbench: the workbench for
disassembly and assembly of engine.
Fuel pressure gauge: used to measure oil pressure of
engine.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст