Chery QQ6 (S21) / S12LHD. Manual — part 139

3.7. Unplug the right-front position light harness to take out the
bump.












3.8. Turn open the low beam light holder shield by hand.







3.9. Unplug the low beam light harness.







3.10. Press down the bulb fixing clip by hand and turn the clip over
to take out the bulb.

3.11. Turn the right-front turning light shield counterclockwise to
disassemble the bulb.
(See the above steps for removal of the left headlight)

4. Removal of Front Fog Lights

4.1. Diassemble the bumper assembly. (Refer to removal of bumper)
4.2. Unplug the right-front fog lights harness connector.







4.3. Use a cross head screwdriver to loosen off the three screws that
fix the front fog light, and then disassemble the right-front fog light
assembly







4.4. Turn the right-front fog light holder and remove the bulb.
(See the above steps for removal of left-front fog lights)

5. Removal of Tail Lights

5.1. Open the rear door.
5.2. Use a cross head screwdriver to loosen off the screws fixing the
left tail light.














5.3. Remove the left tail light, unplug the left tail light harness
connector, and then disassemble the left tail light assembly.






5.4. Use a cross head screwdriver to loosen off the four screws that
fix the tail light holder and open it.

5.5. Turn the bulb counterclockwise by hand and then the bulb can
be removed.

6. Removal of License Plate Lights

6.1. Use a flat head screwdriver to pry off the license plate light.









6.2. Unplug the harness plug to disassemble the license plate light.