Chery QQ6 (S21) / S12LHD. Manual — part 59
室/仪 (室内线束和仪表线束的 插件)
室/左前 (室内线束和左前门线束的 插件)
室/左前 (室内线束和左前门线束的 插件)
室 右前(室内线束和左前门线束的插件)
室/左后 (室内线束和左后门线束的 插件)
Interior/Instrument A (Interior Harness and Instrument Harness’s A Connector)
Interior/FL A (Interior Harness and Front Left Door Harness’s A Connector)
Interior/FL B (Interior Harness and Front Left Door Harness’s B Connector)
Interior/FR A (Interior Harness and Front Right Door Harness’s Connector)
Interior/RL A (Interior Harness and Rear Left Door Harness’s A Connector)
室/左后 (室内线束和左后门线束的 插件)
室/右后 (室内线束和右后门线束的 插件)
室/右后 (室内线束和右后门线束的 插件)
室/后(室内线束和后背门线束的插件)
(
插头阵脚定义)
Interior/RL B (Interior Harness and Rear Left Door Harness’s B Connector)
Interior/RR B (Interior Harness and Rear Right Door Harness’s B Connector)
Interior/RR A (Interior Harness and Rear Right Door Harness’s A Connector)
Interior/B (Interior Harness and Back Door Harness’s Connector)
BCMA (BCMA Connector Pin Definition)
(
插头阵脚定义)
II. Drawing Description
1. Main Symbol Description
Symbol
Meaning
Symbol
Meaning
Circuit Connection
Motor
Fuse Position and
SPecification
Bulb
Relay
ON/OFF Control
Shielded Wire
Resistor Element
Shielded Wire
Solenoid
This section is not
involved in this
system
LED
Connector
Ground
Remark: Please refer to circuit and real object to confirm another symbols.
2. Drawing Description
30: Main positive wire from the battery
30a: Main positive wire from the battery
15: From the ignition switch (IGN1)
15a: From the ignition switch (IGN2)
ka: From the ignition switch (ACC, disconnect it when starating)
58b(RHEO): Power supply for night lighting
BCMB (BCMB Connector Pin Definition)
31– (GROUND): ground cable, from the negative electrode of the battery
Wire diameter and color:
3. Definition of Main Controller
In this schematic diagram of circuit control, “CE/” means the instrument electrical box integrated
with relay connector;
In this schematic diagram of circuit control, “ECU” means the engine control computer;
In this schematic diagram of circuit control, “BCM” means body control computer.
4. Position of Body Grounding Points
The grounding point
of back door is
located in the inside
of back door.
Grounding position of
battery negative. In this
model,
there
is
no
independent electric unit
which directly connects
to battery negative.
Two grounding points
of ECU at the inside of
front left fender: one is
signal
ground,
the
other is power ground.
ABS grounding point
is located at the
bottom
of
ABS
controller and under
A/C
high/low
pressure switch.
Grounding point of
engine hood harness at
the canister.
Grounding point of fan
motor, at the left side
member
and
near
headlamp.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст