Chery QQ6 (S21) / S12LHD. Manual — part 87
production of this tool to other manufacturer. This tool is of the first modification.
HAZET-6290-1CT means it is a standard tool produced by HAZET company with its model
as 6290-1CT.
II. Special Tools Chart
CH-20002
Installation tool for camshaft oil seal:
used to install camshaft oil seal.
Same as A5
CH-20003
Engine timing tool: used to time
crankshaft.
Same as A5
CH-20004
Adaptor: used to install and remove
valve spring (match with Eastar special
tool MLR-MD998772A).
Same as A5
CH-20005
Installation tool for crankshaft rear oil
seal: used to install crankshaft rear oil
seal.
Same as A5
CH-20006
Installation handle for crankshaft rear
oil seal: used to install crankshaft rear
oil seal.
Same as A5
CH-20007
Installation sleeve for crankshaft front
oil seal: used to install crankshaft front
oil seal.
Same as A5
CH-20008
Installation sleeve for crankshaft front
oil seal
Same as A5
CH-20009
Locating tool for flywheel: used to
locate flywheel.
Same as A5
CH-20010
Camshaft timing tool: used to time
camshaft.
Same as A5
CH-20011
Installation tool for camshaft oil seal:
used to install camshaft oil seal.
Same as A5
CH-20012
Valve oil seal guide sleeve: used to
install valve oil seal.
Same as A5
CH-20013
Valve oil seal remover: used to remove
valve oil seal.
Same as A5
CH-20015
Belt pulley bolt remover: used to
remove belt pulley clip.
Same as A5
CH-20017
Installation tool for valve keeper: used
to install valve keeper.
Same as A5
CH-20018-A
Valve spring remover: used to remove
valve spring.
Same as A5
Recommended tools
Loop wheel machine: used to raise engine.
Engine maintenance workbench: the workbench for
disassembly and assembly of engine.
Fuel pressure gauge: used to measure oil pressure of
engine.
Pressure gauge for cylinder: used to measure cylinder
pressure. When measuring, remove spark plug first,
screw instrument pipe orifice into the position of spark
plug, use starter to drag the engine to rotate, and then
fetch the maximum reading of the pressure gauge for
cylinder as cylinder pressure of this cylinder.
Chapter Four Measurement of Cylinder Pressure
I. Detection of Cylinder Pressure
Measurement of cylinder pressure is the major index for judgment of engine working condition,
through which, we can definitely judge if a certain system of engine works well. Therefore, during
maintenance of engine, measurement of cylinder pressure is indispensable.
1. Measuring process
1.1 Turn off ignition switch, pull out all ignition cables
from spark plug side, and then pull out harness
connector of injection nozzle.
1.2 Use a spark plug sleeve to loosen the spark plug
whose cylinder will be measured. Explanation: do not
remove the spark plug whose cylinder will not be
measured.
Please select a cylinder pressure
gauge with accurate reading and let its
pointer return to zero; otherwise, it may affect
accuracy of reading.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст