Chery QQ6 (S21) / S12LHD. Manual — part 30

117

III.

Disassembly/Reassembly

of

Engine

Compartment Harness

Part Number: S21-3724010

(I). Preparation

Tools:

socket wrench, cross screwdriver, flat head screwdriver

(II). Precautions:

Power OFF before the electrical elements and

harnesses are removed.

The ignition switch must be in OFF state.

(III). Removal Procedure

1. Removal

1.1.1. Remove the lower left guard plate from the

instrument panel. (See Disassembly/Reassembly of

Instrument Panel)

1.1.2. Pull out the ECU’s connector.

1.1.3. Remove the A pillar lower trim with a cross

screwdriver.

1.1.4. Remove the ECU’s two grounding points.

118

1.1.5. Pull out the connector to the instrument harness

connector A.

1.1.6. Pull out the connector to instrument harness

connector B.

1.1.7. Pull out the connector to instrument harness

connector C.

1.1.8. Pull out the connector of interior harness.

1.1.9. Pull out the connectorof electronic accelerator

pedal.

119

1.1.10. Pull out the connector of wiper motor.

1.1.11. Pull out the connector of A/C high/low pressure

switch.

1.1.12. Pull out the connector of right front wheel

sensor.

1.1.13. Pull out the connector of ABS controller.

1.1.14. Remove the ABS controller, Remove the ABS

grounding point.

120

1.1.15. Remove the upper fixing bolts from the left

fender with a 10# socket wrench.

1.1.16. Remove the lower fixing bolts from the left

fender with a 10# socket wrench.

1.1.17. Remove the fixing bolts from the exterior

rear-view mirror support at the left fender with a10#

socket wrench.

1.1.18. Remove the front bumper mounting with a

cross screwdriver.

1.1.19. Pull out the connector of washer motor.