Chery QQ6 (S21) / S12LHD. Manual — part 180
4. Removal Procedure
4.1 Loosen the two screws under the steering wheel with 5# inner
hex wrench.
4.2 Remove the horn cover from the steering wheel.
4.3 Remove the fixing nuts of the steering wheel with 22# socket
wrench.
4.4 Remove the steering wheel after screw off the nuts.
4.5 Screw off the two screws from the front surface of combined
switch guard plate with cross screwdriver.
4.6 After screw off the screws, open upward to remove the upper
protective cover.
4.7 Screw off the three screws from the lower side of combined
switch guard plate with cross screwdriver.
4.8 Remove the lower protective cover after screw off the screws.
4.9 Remove the two fixing screws from the combined switch with
cross screwdriver.
4.10 Pull out all plugs from the combined switch. (Total 5 plugs)
4.11 Remove the combined switch.
4.12 Pull out the plug of ignition switch.
4.13 Screw off the fixing screws from ignition lock with 5# inner
hex wrench and remove the ignition lock assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст