Chery QQ6 (S21) / S12LHD. Manual — part 33
129
2.1.3. Remove the connectors from the ignition coil.
2.1.4. Remove the connector from the camshaft sensor.
2.1.5. Remove the connector from the cansiter solenoid
valve connector.
2.1.6. Remove the connector from the air pressure
sensor.
2.1.7. Remove four connectors from the injector
nozzle.
130
2.1.8. Remove the connector from the charging
indicator.
2.1.9. Remove the connector from the generator.
2.1.10. Remove the starter connector and battery
connector.
2.1.11. Pull out the connector from the A/C
compressor.
2.1.12. Remove the connector from the oil pressure
switch.
131
2.1.13. Remove the connector from the power steering
pump.
2.1.14. Remove the connector from the knock sensor.
2.1.15. Remove the connector from the backup lamp
switch.
2.1.16. Remove the connector from the water
temperature sensor.
2.1.17. Remove the connector from the front rear
oxygen sensor.
132
2.1.18. Remove the connector from the vehicle speed
sensor.
2.1.19. Remove the connector from the engine speed
sensor.
2.1.20. Take off the electronic injector harness assy.
2.2. Installation
Install it in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст