Chery A15. Manual — part 102
BODY FRONT INTERIOR SPRAY COATED WITH PUTTY ADHESIVE
Table for Application of Putty
Adhesive
Code
Applied Position
Material Model
13
-Joint of Roof Panel and Side Panel
D
14
-Joint of the Rear Door or the Tail Door
Plank Edge with Outer Case
A
15
-Joint of the Rear Wheel House
-Reinforced Bracket for Rear Shock
Absorber
-Assembly Section of Driving System
C
D
E
16
-Connecting Position between Rear
Lining
Plate and Lining Plate of Side Fender
Shield
-Connecting Position between Real
Bracing
Piece and the Exterior of Floor Board
D
C
Front Exterior Area
A
B
C
D
E
AMV 162 000 PVC Structural Glue
AMV l68 000 PVC Reinforced Glue
AKR 303 P10 PVC Multifunctional Putty Adhesive
AKD 473 K20 Sealing Putty Adhesive
AKD 466 000 Electronic Welding Adhesive
S-58
CHECKING THE SIZE OF UNDERBODY PANEL
Point A-a Fixing Position for Bracing Piece of Engine
Point B-b Fixing Position for Bracing Piece of Differential Gear Housing
Point C-c Fixing Position of Rear Axle
Point D-d Fixing Position for Bracket of Rear Bumper
Size Code STD Value Part Measured
1 1020±1mm
Between A and a
2 1090±1.5 mm
Between A and b
3 679 士 1mm
Between B and b
4 703±lmm
Between A and B
5 2l24±1.5 mm Between B and C
6 226l±2mm
Between B and c
7 880±1.5 mm
Between C and c
8 875±1.5 mm
Between C and D
9 l306±1.5 mm Between C and d
10 1074±1.5 mm
Between D and d
S-59
STRUCTURE OF
GUARD PLATE
1. Distance between Reference Line and Point A-a = 246
2. Distance between Reference Line and Point B-b = 140
3. Distance between Reference Line and Point C-c = 94.2
4. Distance between Reference Line and Point D-d = 246
Reference Line = -100Z
S-60
INSPECT THE BODY BY USING THE FRAMEWORK OF SPECIAL
MEASUREMENT SYSTEM
S-61
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст