Chery A11. Manual — part 88
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
9.Replace O-ring on the booster
piston, if necessary.
ssembly procedure:
10.Replace O-ring on piston A.
A
1.Install diaphragm spring on
the booster piston.
99
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
2.Install piston A on the booster
piston.
Install the booster piston into
tool of
down the booster piston and
install the snap ring;
3.
clutch A drum.
4. Use the special
KA-000-913 (diaphragm
spring compressor) to press
100
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
5.
101
Install clutch A assembly;
Install clutch A assembly’s
Check the gap between clutch
dial indicator on
8.
m and read
If the reading exceeds this
scope, select the snap ring with
different thickness.
6.
positioning snap ring;
7.
A assembly. As shown in the
figure, put the
top of clutch A drum.
Lift clutch A’s dru
the gap. The gap is permitted
between 1.8~2.0mm.
9.
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
10. Install the worm shaft;
11.
nap ring on clutch A’s
13.
lutch E
re
isassembly procedure:
Remove the automatic
transmission assembly from the
vehicle;
Remove clutch E from the
automatic transmission;
Take out the input shaft’s
adjusting washer;
Install the s
worm shaft;
12. Install clutch A assembly into the
transmission;
Install the assembled
transmission into the vehicle;
C
Special tool: KA-001-715-04 bearing
mover
D
1.
2.
3.
102
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст