Chery A11. Manual — part 101

CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual

.

Install the shuttle valve’s

compression plate and fix it

with bolts: The bolts’

tightening torque: 8Nm

late

assembly;

. Install the valve plate assembly

on the transmission;

.

Install the assembled

transmission assembly on the

vehicle;

ransmission assembly

ecial tools:

A-002-008 differential regulator

KA

A-001-483 gap detector

A-001-655 main back output gear

p detector

ssembly procedure:

Install the driven shaft bearing’s

outer racer;

Install the lock bolt on the

driven shaft bearing’s outer

racer; The bolts’ tightening

torque: 20Nm；

16

17.

Assemble the valve p

18

19

T

Sp

K

KA-000-155 grooved nut lock unit

-000-288 driven shaft locator

K

K

ga

A

1.

2.

151

CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual

3. Use the transmission fluid to

lubricate piston D;

Turn over the transmission by

180 degree and face the side of

driven shaft upwards;

ote:

Preheat the transmission

the i

outp

Turn over the case by 90

degree and face the parking

lock mechanism upwards;

Install 1

st

gear one-way overrun

4. Install piston D;

5.

N

case to 70

in order to facilitate

℃

nstallation of driven shaft back

ut bearing’s outer racer.

7.

8.

clutch so that it is engaged

correctly;

152

CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual

rque: 50Nm;

. Bend the protection ring’s

square teeth and lock it on

the grooved nut;

. Turn over the transmission by

90 degree, as shown by the

figure;

. Install the diaphragm spring and

brake D assembly;

9. Install the protection ring and

grooved nut. Lock the grooved

nut: The grooved nut’s

tightening to

10

11

12

153

CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual

Install the positioning

13.

snap

ring on brake D assembly;

15.

16

14. Turn over the transmission by

90 degree, as shown by the

figure:

Install the governor and its

protection shroud;

. Install the driven shaft;

154