Chery SQR 7160 sedan. Manual — part 93
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
9. Take out the carrier rod on the
brake band C’;
. Remove the O-ring on carrier
rod of brake band C’.
ssembly procedure:
Put an O-ring on brake band
C’.
10
A
1.
82
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
2.Plu
83
g in the carrier rod of
brake band C’. Install the
adjusting bolt, washer and
adjusting nut. The
adjusting bolt is screwed in
by half.
ote:
Two disk washers have
assembled so that the sunk
de faces each other.
br
3
e
der.
Put a new O-ring on piston
C’. Then put piston C’ on the
piston push rod and fix it
N
be
si
Otherwise, it will influence the
ake’s working.
.Put the two disk washers on
the piston’s push rod. The
thicker one is close to th
shaft shoul
4.
with a snap ring.
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
5.Put a spring on the piston push
rod. The plug piston C’
assembly into the housing;
Install the hydraulic cylinder
head;
Install the snap ring;
Install the brake band C’;
bled
;
6.
7.
8.
9.
Install the assem
transmission on the vehicle
84
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
Middle seat, brake C and oil
mp assembly
ecial tool: KA-000-914
aphragm spring lock unit
isassembly procedure:
automatic
2.
’ and oil pump from
the transmission;
Remove the positioning snap
ring on brake C.
Take out brake C assembly;
Press down the diaphragm spring
with KA-000-914 of diaphragm
spring compressor. Then remove
pu
Sp
di
D
1.
Remove the
transmission assembly from
the whole vehicle;
Remove the middle seat,
brake C
3.
4.
5.
the fixing snap ring by a
screwdriver.
85
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст