Chery SQR 7160 sedan. Manual — part 88
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
3. Install the bolt connecting the
left suspension and the cushion.
anger;
Install the coolant tank;
The tightening torque on the
coolant tank’s fixing bolt:
25Nm.
4. Remove the engine h
5.Install the cooler’s back cover;
6.
7.Install the battery.
62
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
Front suspension
Disassembly procedure:
1. Remove
the
battery’s
negative terminal;
’s
nnecting
5.
ecting
on.
1.
nnecting the
e
2.
stall the bolt connecting the
ont suspension and the front
. Plug on the fan’s electric
.
nsmission on the whole
hicle.
ecial tool: J-28467-B engine
1.
2. Remove the cooling fan
electric terminal;
3. Remove the cooling fan;
4. Remove the bolt co
the front suspension and the
front cross-member;
Remove the bolt conn
the front suspension and the
transmissi
Assembly procedure:
Install the bolt co
front suspension and th
transmission;
In
fr
cross-member;
3. Install the cooling fan;
4
terminal;
5. Connect the battery’s negative
terminal
Disassembly of the automatic
tra
ve
Sp
hanger
Disassembly procedure:
Remove the battery;
2. Remove gearshift cable;
3. Take off the neutral positioning
switch’s terminal;
4. Remove the throttle cable;
5. Remove the cooler’s top cover;
63
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
6. Install the engine hanger
and lift the engine;
Remove
the
transmission
suspension;
Lift the vehicle;
Drain off the fluid;
. Remove
the
vehicle
11.
ehicle;
.
Remove the cooling
pipe;
.
Loosen the bolt
connecting the
transmission’s left and
back suspension and the
transmission.
. Lift the vehicle;
. Remove the two front wheels;
. Remove the transmission’s drive shaft;
spension;
. Rotate the targeted wheel
so that all fixing bolts on
the converter could be
seen from the engine’s
side hole;
. Remove the converter’s
fixing bolts on the
targeted wheel.
7.
8.
9.
10
speed sensor’s terminal;
Lower the v
12
13
14
15
16
17. Remove the engine’s front su
18
19
64
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
20
65
. Lower the vehicle;
. Loosen the bolt connecting the
upper part of the converter case
and the engine;
Lift the vehicle;
24.
e
lower part of the converter case
and the engine;
Remove the front suspension;
Remove the transmission
assembly.
1.
ion assembly
while being supported with a
jack.
Install the bolt connecting the
converter with the engine.
Tightening torque: 75Nm
21
22.
23. Support one jack under the
transmission.
Loosen the bolt connecting th
25.
26.
Assembly procedure:
Install the transmiss
2.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст