Subaru BRZ (2022 year). Manual in english — page 8
154
Combination Meter Display (Color TFT)
Pressing and holding
will reset the
Immediately adjust the tire pressure
This screen displays lateral G-forces on
average vehicle speed/driving
time/
when the warning light illuminates.
the vehicle.
driving distance.
When the tire pressure monitoring
Also displays, around the periphery of the
system detects the adjusted tire pres-
G-force display, the left and right steering
▼ Drive information (page 4) (if
sure, the warning light will turn off and
amount, accelerator pedal input, and
equipped)
the tire pressure values will turn to
brake fluid pressure.
white.
This display is intended for use as a guide-
For information about the specified
line. Depending on factors such as the
value of the air pressure, refer to
road surface condition, temperature and
"Tires" ) P385
vehicle speed, the display may not show
the actual condition of the vehicle.
■ Exclusive Content for
Press and hold
to change the range of
SUBARU BRZ
the acceleration G-force display between
▼ G-force
1.0 G and 0.5 G.
▼ G-force (peak hold function)
4
702781
1
5
This screen displays each tire pressure.
2
When a tire is deflated, the deflated tire
1
and the tire pressure will be displayed on
the screen in yellow.
3
2
NOTE
4
3
The tire pressure values are
displayed several minutes after
306799
driving.
1)
Acceleration G-force on the vehicle
Once the tire pressure monitoring
306800
2)
Accelerator pedal input
system detects the low tire pressure,
1) Record of the maximum G-forces
3)
Brake fluid pressure
the tire pressure values will display in
4)
Steering amount
2) Acceleration G-force on the vehicle
yellow until the system detects the
3) Accelerator pedal input
normal tire pressure.
Combination Meter Display (Color TFT)
155
4) Brake fluid pressure
3) Current engine speed
5) Steering amount
The vertical bar will slide laterally
This screen displays lateral G-forces on
according to the current engine speed.
2
the vehicle
This chart is intended for reference only
Also displays, around the periphery of the
and does not show the
actual engine
3
G-force display, the left and right steering
torque or output.
4
amount, accelerator pedal input, and
brake fluid pressure
▼ Stopwatch
5
3
This display is intended for use as a guide-
6
line. Depending on factors such as the
road surface condition, temperature and
306803
vehicle speed, the display may not show
the actual condition of the vehicle.
Measurement screen
1) Fastest lap time (top screen)
Press and hold
to reset the record of
1
2) Fastest lap time (measurement screen)
maximum G-forces.
3) Current lap time
4) Total lap time
▼ Power and torque curve
5) Past lap times
6) Meter control switch operation guide
306802
When the timer is reset, “− −’− −”− −” will
be displayed.
Top screen
1
A maximum of 50 lap times can be
2
recorded.
Changing between the stopwatch
screens
3
To change to the measurement screen:
Press
To change to the top screen: Press
306801
Operating the measurement screen
1) Power output
: Start/stop measurement
2) Torque
: Mark off one lap
- CONTINUED -
156
Combination Meter Display (Color TFT)
: Reset measured lap times
■ Navigation System-Linked
■ Audio System-Linked
/
: Scroll through the lap times
Display
Display
Resetting measured lap times
After stopping the measurement, press
To display other content while the stop-
watch is operating
If the measurement screen is displayed,
press
to display the top screen. Then
operate the meter control switches to
display other content. While other items
are displayed, the measurement will
continue but the stopwatch cannot be
operated.
306798
306879
When the route guidance is set in the navi-
This screen displays the status of audio
gation system, this item shows the naviga-
information. For details about the audio
tion route information. For details about
system, refer to the separate audio
the audio system, refer to the separate
Owner’s Manual.
audio Owner’s Manual.
Combination Meter Display (Color TFT)
157
■ Driving Support System
Settings Display
The setting adjustments to the following
systems can be changed to meet your
personal requirements.
LDW (Lane Departure Warning)*1*2
PCB (Pre-Collision Braking)*1*2
BSD/RCTA*1
3
RAB
(Reverse Automatic Braking
system)*1
(Sonar audible alarm)*1
SRH
(Steering Responsive Head-
light)*1
*1: If equipped
*2: For details about EyeSight system, refer to
the Owner’s Manual supplement for the
EyeSight system.
■ Settings Display
Use the meter control switches on the
steering wheel to change settings.
1. Press
or
to select
2. Operate the switches to select a
desired item.
3. Press
/
or
/
to change
the setting and then press
to confirm
the change.
- CONTINUED -
158
Combination Meter Display (Color TFT)
Page reference for
Item
Settings
the vehicle system
operation
Acquisition Sound
ON/OFF
Start Alert
ON/OFF
*2
EyeSight *1
Accel Lv.
Lv.1 (Eco)/Lv.2 (Comfort)/Lv.3 (Standard)/Lv.4 (Dynamic)
Select Drive Lane
Right Lane/Left Lane
Units
km, km/h, l/100km / miles, MPH, MPG
127, 151 and *2
Warning Volume *1
Max/Mid/Min
277 and *2
Startup Scrn
ON/OFF
-
GSI (MT models)
ON/OFF
234
Screen Settings
Indicator
ON/OFF
REV.
RPM
**00rpm
130
Buzzer
ON/OFF
Audible Signal *1
ON/OFF
105 and 110
Keyless Entry
Hazard Flasher
ON/OFF
106 and 110
Driver Door Unlock
Driver Door Only/All
100
Defogger
15 minutes/Continuous
185
Interior Light
7.5 seconds/15 seconds/30 seconds
212
Car Settings
Light Sensitivity
Min/Low/Mid/High/Max
174
Auto Light Sensor
Wiper Link
ON/OFF
175
Approaching Time Set
30 seconds/60 seconds/90 seconds/OFF
Welcome Lighting
175
Leaving Time Set
30 seconds/60 seconds/90 seconds/OFF
1-Touch LN CHGR
ON/OFF
182
*1: If equipped
*2: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
Combination Meter Display (Color TFT)
159
■ Warning Message Display
■ Telltale Screen
Mark
Name
Page
Steering Responsive
1
Headlight OFF indica-
150
tor light (if equipped)
Steering Responsive
Headlight warning light
150
(if equipped)
RAB warning light (if
151
equipped)
3
RAB OFF indicator (if
151
equipped)
BSD/RCTA warning
150
indicator (if equipped)
306794
1
307005
BSD/RCTA OFF indi-
Example of warning
1) Telltale screen
150
cator light (if equipped)
If there is a warning message or a mainte-
When the corresponding situation occurs,
Automatic headlight
nance notification, it will appear on combi-
beam leveler warning
150
the following telltales will be displayed on
nation meter display (color TFT). Take the
light
the telltale screen.
appropriate actions based on the
Hill start assist indica-
messages indicated.
150
tor light
Mark
Name
Page
Cruise control indica-
Door open indicator
141
tor light (white/green)/
light
Cruise control warning
Low tire pressure warn-
149
light (yellow) (models
138
ing light (if equipped)
without the EyeSight
AT OIL TEMP warning
system)
138
light (AT models)
LED headlight warning
150
light
High beam assist indi-
150
cator light (if equipped)
160
Center Information Display (CID)
3-8. Center Information
Items
Page
■ Touch Screen Operations
Display (CID)
Refer to
The center information display has a
the sepa-
touch screen. Operations are performed
Audio/telephone
rate audio
by touching the touch screen directly.
WARNING
Owner’s
Manual.
Always pay attention to safe driving
▼ Touch
Refer to
when operating the center informa-
the
tion display while the vehicle is in
Owner’s
motion. When operation of the cen-
Manual
ter information display is disturbing
EyeSight (if equipped)
supple-
your awareness and ability to con-
ment for
centrate on driving, stop the vehicle
the Eye-
in a safe place before performing
Sight sys-
operations on the display. Also, do
tem.
not concentrate on the display
The center information display can also be
while driving. Doing so could result
used to set and initialize the center infor-
in an accident.
mation display itself.
306863
■ Features
NOTE
When the vehicle is in motion,
Quickly touch and release once.
All information is displayed on the center
certain functions and selections may
information display, including vehicle
not be available.
settings, vehicle status, and audio opera-
The language and units for both the
tion.
center information display and the
combination meter display (color TFT)
Items
Page
can be changed. For details, refer to
Maintenance information
171
"Car settings" ) P165.
Vehicle settings
161
The images displayed in this
Rear view camera
263
Owner’s Manual are sample images.
The actual image may vary depending
on the region and vehicle specifica-
tions.
Center Information Display (CID)
161
▼ Drag
Quickly move the screen by swiping with
▼ General settings
your finger.
Set the time and display general items.
NOTE
Swipe operations may not be per-
formed smoothly in high altitudes.
■ Main Screen
3
306864
306997
Touch the screen and move the screen to
the desired position.
1.
Press
(HOME).
▼ Swipe
2.
ĺ
(Settings)
3.
ĺ“General”
306804
4.
Select the preferred menu.
To display the main screen, press
(HOME).
In this Owner’s Manual, the following
settings will be explained. For details
about other items, refer to the separate
audio Owner’s Manual.
“Settings”ĺ“General”
“Settings”ĺ“Car”
306865
(Car settings icon)
– CONTINUED -
162
Center Information Display (CID)
The setting adjustments to the following items can be manually changed to meet your personal requirements.
Item
Page reference
Page reference
for the vehicle
Available settings
for the setting
1st menu
2nd menu
3rd menu
system opera-
procedure
tion
Time Setting *1
Auto/Manual
172
Clock
Time Setting *2
Sync With Phone/Manual
172
172
Clock Format
12H/24H
170
*3
Driver Profiles
―
Default/4 users
―
Display Off
Turn the screen off.
―
170
Brightness Dial
ON/OFF
130
170
Display
Set and adjust the brightness and
Brightness/Contrast
170
170
contrast of the display.
Wi-Fi
ON/OFF
Connected to:
Select the registered devise.
General
Wi-Fi
Available Wi-Fi Networks
Add
*3
―
Wi-Fi Protected Setup
PIN Setup/Push Button Setup
Registered Wi-Fi Networks
―
Wi-Fi Hotspot
ON/OFF
Wi-Fi name (SSID):
―
Security Type:
―
Wi-Fi Hotspot
Password:
―
*4
―
Broadcast Frequency:
2.4 GHz/5 GHz
SSID Broadcast
ON/OFF
Connected Devices:
―
Center Information Display (CID)
163
Item
Page reference
Page reference
for the vehicle
Available settings
for the setting
1st menu
2nd menu
3rd menu
system opera-
procedure
tion
Maintenance
ON/OFF
170
Reminder Screen
Birthday
ON/OFF
*4
170
Anniversary
ON/OFF
170
Startup Screen
ON/OFF
127
170
3
Gear Shift Indicator (MT mod-
Meter Screen
ON/OFF
234
170
els)
Meter Rev. Indicator
Indicator/RPM/Buzzer
130
157
General
Rear Camera Delay Control
ON/OFF
264
170
Camera
Steering Angle Lines
ON/OFF
266
170
Language
ʊ
English/Français/Español
151 and 160
170
Home Screen Short-
*3
ʊ
ON/OFF
170
cuts
Birthday List
ʊ
Set a birthday.
*3
170
Anniversary List
ʊ
Set an anniversary day.
*3
171
- CONTINUED -
164
Center Information Display (CID)
Item
Page reference
Page reference
for the vehicle
Available settings
for the setting
1st menu
2nd menu
3rd menu
system opera-
procedure
tion
Update
Check if a new software update
Automatically Check for
ON/OFF
Software Update
Updates
Automatically Download
ON/OFF
Updates
SUBARU STARLINK
ʊ
OK/Cancel
Apps Recovery
*4
General
ʊ
SUBARU STARLINK
ʊ
ON/OFF
Auto Connect
Factory Data Reset
ʊ
Reset/Cancel
System Information
ʊ
ʊ
Free/Open Source
ʊ
ʊ
Software Information
*1: Models with SUBARU STARLINK Safety and Security
*2: Models without SUBARU STARLINK Safety and Security
*3: For details about the audio system, refer to the Owner’s Manual supplement for the audio system.
*4: For details, refer to the Owner’s Manual supplement for SUBARU STARLINK Safety and Security.
NOTE
Touch to display the explanation of the items.
Center Information Display (CID)
165
▼ Car settings
Perform the EyeSight system setting and
vehicle setting.
3
306998
1. Press
(HOME).
2. ĺ
(Settings)
3. ĺ“Car”
4. Select the preferred menu.
- CONTINUED -
166
Center Information Display (CID)
The setting adjustments to the following items can be manually changed to meet your personal requirements.
Item
Page refer-
Page refer-
ence for the
ence for the
Available settings
1st menu
2nd menu
3rd menu
vehicle sys-
setting proce-
tem operation
dure
Pre-Collision Braking
Setting ON/Setting OFF
Lane Departure Warning
ON/OFF
Cruise Control Acceleration
Lv.1 (Eco)/Lv.2 (Comfort)/Lv.3
Characteristics
(Standard)/Lv.4 (Dynamic)
*2
ʊ
EyeSight* 1
Lead Vehicle Acquisition
ON/OFF
Sound
Lead Vehicle Moving Monitor
ON/OFF
Select Drive on Left/Drive on
Right Lane/Left Lane
Right
Car
Sonar Audible Alarm
ON/OFF
277
170
Reverse Automatic Braking *1
Automatic Braking
ON/OFF
277
170
Audible Signal *1
ON/OFF
105 and 110
170
Keyless Entry System
Hazard Warning Flasher
ON/OFF
106 and 110
170
Driver Door Unlock *1
Driver Door Only/All
100
170
Defogger
ʊ
15 minutes/Continuous
185
170
7.5 seconds/15 seconds/30
Interior Light
ʊ
212
170
seconds
Center Information Display (CID)
167
Item
Page refer-
Page refer-
ence for the
ence for the
Available settings
1st menu
2nd menu
3rd menu
vehicle sys-
setting proce-
tem operation
dure
Light Sensitivity
Min/Low/Mid/High/Max
174
170
Auto Light Sensor
Wiper Link
ON/OFF
175
170
30 seconds/60 seconds/90
Approaching Time Set
170
seconds/OFF
Welcome Lighting
175
30 seconds/60 seconds/90
3
Leaving Time Set
170
seconds/OFF
One-Touch Lane Changer
ʊ
ON/OFF
182
170
Car
BSD/RCTA *1
ʊ
ON/OFF
274
170
Steering Responsive Head-
ʊ
ON/OFF
180
170
lights (SRH) *1
Warning Volume *1
ʊ
Min/Mid/Max
272, 286 and *2
170
km, km/h, Liter/
Units
ʊ
127 and 151
170
Miles, MPH, Gallon
*1: If equipped
*2: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
NOTE
Touch to display the explanation of the items.
- CONTINUED -
168
Center Information Display (CID)
▼ Car settings icon
Touch
to display the items that are
changeable while driving.
307002
Center Information Display (CID)
169
Item
Page reference for
Page reference for
Available settings
the vehicle system
the setting proce-
1st menu
2nd menu
operation
dure
Cruise Control Accel-
Lv.1 (Eco)/Lv.2 (Comfort)/Lv.3 (Standard)/Lv.4
eration Characteris-
*2
ʊ
(Dynamic)
Vehicle Control
tics *1
Steering Responsive
ON/OFF
180
170
Headlights (SRH) *1
3
Pre-Collision Braking
Setting ON/Setting OFF
*2
ʊ
Lane Departure
Driving Assistance *1
ON/OFF
Warning
BSD/RCTA
ON/OFF
268
170
Warning Volume *1
Min/Mid/Max
277 and *2
ʊ
Others
Units
km, km/h, Liter/Miles, MPH, Gallon
127 and 151
170
*1: If equipped
*2: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
- CONTINUED -
170
Center Information Display (CID)
▼ How to select items on the screen
▽ Selecting
5. ĺ“Brightness/Contrast”
▽ ON/OFF setting
306873
306872
Example
6. Drag
to adjust the brightness and
306871
contrast.
Touch the preferred item.
Example
Touch “Default” to revert to the factory
Touch the changing menu and select ON
▼ How to set items on the screen
setting.
or OFF
▽ Brightness/Contrast
▽ Birthday List
Set and adjust the brightness and contrast
If
a birthday or anniversary is
of the center information display.
approaching, a message will be shown
when the ignition switch is turned to the
NOTE
“ON” position. This function can be set to
on or off by
“Reminder screen”. For
“Brightness” can only be adjusted
details, refer to "General settings" ) P161
when “Brightness Dial” is off. Refer to
"General settings" ) P161.
1. Press
(HOME).
1. Press
(HOME).
2. ĺ
(Settings)
2. ĺ
(Settings)
3. ĺ“General”
3. ĺ“General”
4. ĺ“Birthday List”
4. ĺ“Display”
Center Information Display (CID)
171
▼ Maintenance
XXXX
3
306999
307001
5.
ĺ“Add”
8. Enter the date.
306164
9. ĺ“OK”
Maintenance reminders can be set.
Engine oil setting:
NOTE
A maximum of 5 birthdays can be
1. Touch
(Maintenance).
stored.
2. ĺ
(Engine Oil)
3. Select “Notification Date” or “Notifica-
▽ Anniversary List
tion Distance” of the reminder.
The procedure for setting an anniversary
4. ĺ“Set”
is the same as "Birthday List" ) P170,
5. ĺ
except that in step 4 “Anniversary List” is
selected.
Oil Filter setting:
307000
The setting procedure is the same as
“Engine Oil” setting, but touch the
“Oil
6.
Enter the name.
Filter” item in step 2.
7.
ĺ“Next”
Tires setting:
The setting procedure is the same as
“Engine Oil” setting, but touch the “Tires”
item in step 2.
- CONTINUED -
172
Clock
Maintenance Schedule setting:
3-9. Clock
The setting procedure is the same as
“Engine Oil” setting, but touch the “Mainte-
For models with a genuine SUBARU
nance Schedule” item in step 2.
audio system, the clock can be adjusted
using either auto mode or manual mode.
NOTE
Touch “Reset” to reset each setting.
■ Setting the Clock Manually
Touch
“Update” to revert to the
1. Turn the ignition switch to the “ON”
default value.
position.
306875
7. ĺ“Manual”
8. ĺ or
9. ĺ“OK”
NOTE
The clock setting screen can also be
displayed by touching the clock on the
status bar.
306807
2. Press
(HOME).
3. Touch
(Settings).
4. ĺ“General”
5. ĺ“Clock”
6. ĺ“Time Setting”
Clock
173
■ Setting the Clock Automati-
Manual for the audio system. The clock
will be adjusted automatically.
cally
1. Turn the ignition switch to the “ON”
NOTE
position.
For models without SUBARU STAR-
LINK Safety and Security: Depending
on the model of smartphone, the set-
tings of the connected smartphone
may need to be changed. (ex: For iOS
3
or other models, notification settings
may need to be activated.) For details,
check the instructions on connecting
306875
smartphones.
7. Models with SUBARU
STARLINK
Safety and Security:
▼ Models with SUBARU STARLINK
ĺ“AUTO”
Safety and Security
Models without SUBARU
STARLINK
The clock will be set automatically where
306807
Safety and Security:
a DCM (Data Communication Module in
ĺ“Sync With Phone”
2.
Press
(HOME).
vehicle cellular connection) signal is avail-
Models without SUBARU
STARLINK
able.
3.
Touch
(Settings).
Safety and Security:
4.
ĺ“General”
The clock will be set and adjusted auto-
5.
ĺ“Clock”
matically when a smartphone is
6.
ĺ“Time Setting”
connected via Bluetooth® for transferring
phonebook data.
1. Register the smartphone to the audio
system. For details, refer to
“Bluetooth
SETTINGS” in the supplemental Owner’s
Manual for the audio system.
2. Transfer phonebook data to the
system. For details, refer to
“Bluetooth
SETTINGS” in the supplemental Owner’s
174
Light Control Switch
3-10. Light Control Switch
conditions, a chirp sound will inform
For AT models, the select lever is in a
the driver that the lights
are
illumi-
position other than “P” position.
nated.
“
” position:
CAUTION
Instrument panel illumination, headlights,
Use of any lights for a long period
■ Headlights
parking lights, side marker lights, tail lights
of time while the engine is not
and license plate lights are on.
running can cause the battery to
“
” position:
discharge.
Instrument panel illumination, parking
Before leaving the vehicle, make
lights, side marker lights, tail lights and
sure that the light control switch
license plate lights are on.
is turned to the off position. If the
vehicle is left unattended for a
“AUTO” position: auto on/off head-
long time with the light control
lights
switch set to a position other than
When the ignition switch is in the “ON”
the off position, the battery may
position, the instrument panel illumination,
be discharged.
headlights, parking lights, side marker
lights, tail lights and license plate lights
306964
are automatically on or off depending on
The light control switch operates when the
the level of the ambient light.
push-button ignition switch is in the “ACC”
To turn on the headlights, turn the knob on
or “ON” position.
the end of the light control switch.
The light sensitivity of the auto on/off
headlights can be changed by operating
Regardless of the position of the light
“OFF” position:
the combination meter display (color TFT)
control switch, the illuminated lights are
The headlights are all off.*1,*2
or the center information display. For
turned off when the push-button ignition
*1: For Canada models, when the light switch is
details, refer to "Settings Display" ) P157
switch is turned off.
switched to the “OFF” position while the
or "Car settings" ) P165. Also, the setting
vehicle is stopped, the lights turn off. Then
can be changed by a SUBARU dealer.
NOTE
the light switch will automatically return to
the “AUTO” position.
Consult your SUBARU dealer for details.
The light control switch can be oper-
*2: For Canada models, the headlights will
ated (except auto on/off headlights),
automatically change to the AUTO mode
▼ Battery-saving function
even the push-button ignition switch
when the following conditions are met:
If the headlights or tail lights are illumi-
is turned off.
The engine is running.
nated when the push-button ignition
If the driver’s door is opened while the
The parking brake is fully released.
switch is off, in order to prevent the battery
headlights are illuminated under such
from becoming discharged, the lights will
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст