Subaru Legacy (2005 year). Manual — part 364
FU(H6DO)-9
FUEL INJECTION (FUEL SYSTEMS)
General Description
6. FUEL LINE
FU-02585
(1)
(1)
(2)
(4)
(3)
(5)
(1) (1)
(1)
(1)
(9)
(32)
(30)
(31)
(11)
(15)
(1)
(1)
(16)
(1)
(20)
(19)
(14)
(13)
(12)
(1)
(22)
(22)
(10)
(29)
(17)
(26)
(25)
(24)
(18)
(23)
(1)
(21)
(34)
(28)
(27)
T3
T2
T4
T3
T3
T3
(33)
B
A
A
B
(7)
(8)
(6)
T3
T3
T1
T1
FU(H6DO)-10
FUEL INJECTION (FUEL SYSTEMS)
General Description
C: CAUTION
• Wear work clothing, including a cap, protective
goggles, and protective shoes during operation.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust and dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Be careful not to burn yourself, because each
part on the vehicle is hot after running.
• Be sure to tighten fasteners including bolts and
nuts to specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before disconnecting connectors of sensors or
units, be sure to disconnect the ground cable from
battery.
• Place “NO FIRE” signs near the working area.
• Be careful not to spill fuel on the floor.
D: PREPARATION TOOL
(1)
Clip
(15)
Purge hose A
(29)
Clip
(2)
Fuel return hose
(16)
Purge hose B
(30)
Fuel hose
(3)
Evaporation hose
(17)
Two-way valve hose B
(31)
Purge hose C
(4)
Fuel delivery hose A
(18)
Canister drain hose B
(32)
Connector
(5)
Fuel delivery hose B
(19)
Two-way valve drain hose
(33)
Purge pipe
(6)
Fuel bypass valve
(20)
Two-way valve
(34)
Two-way valve bracket
(7)
Bracket
(21)
Two-way valve hose C
(8)
Bracket
(22)
Connector
Tightening torque: N
⋅
m (kgf-m, ft-lb)
(9)
Fuel pipe ASSY
(23)
Evaporation hose holder
T1: 1.25 (0.13, 0.94)
(10)
Clamp
(24)
Fuel filler pipe ASSY
T2: 4.4 (0.45, 3.2)
(11)
Canister
(25)
Filler pipe packing
T3: 7.5 (0.76, 5.5)
(12)
Canister protector (Sedan model)
(26)
Filler ring
T4: 8.3 (0.85, 6.1)
(13)
Canister drain hose A
(27)
Filler cap
(14)
Two-way valve hose A
(28)
Tether
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
18482AA000
(Newly adopted tool)
CARTRIDGE
Troubleshooting for electrical system.
22771AA030
SUBARU SELECT
MONITOR KIT
Troubleshooting for electrical system.
• English: 22771AA030 (Without printer)
• German: 22771AA070 (Without printer)
• French: 22771AA080 (Without printer)
• Spanish: 22771AA090 (Without printer)
ST18482AA000
ST22771AA030
FU(H6DO)-11
FUEL INJECTION (FUEL SYSTEMS)
Throttle Body
2. Throttle Body
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Remove the air intake chamber. <Ref. to
IN(H6DO)-7, REMOVAL, Air Intake Chamber.>
4) Disconnect the connector from the throttle posi-
tion sensor.
5) Disconnect the engine coolant hoses (A) from
throttle body.
6) Remove the bolts (B) which secure throttle body
to intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new O-ring.
Tightening torque:
8 N
⋅
m (0.8 kgf-m, 5.9 ft-lb)
IN-00203
FU-02111
FU-02112
(A)
(B)
(B)
(A)
FU(H6DO)-12
FUEL INJECTION (FUEL SYSTEMS)
Intake Manifold
3. Intake Manifold
A: REMOVAL
1) Remove the collector cover.
2) Release the fuel pressure. <Ref. to FU(H6DO)-
39, RELEASING OF FUEL PRESSURE, PROCE-
DURE, Fuel.>
3) Open fuel filler flap lid, and remove fuel filler cap.
4) Disconnect the ground cable from battery.
5) Remove the air cleaner case and air intake
chamber. <Ref. to IN(H6DO)-5, REMOVAL, Air
Cleaner Case.> <Ref. to IN(H6DO)-7, REMOVAL,
Air Intake Chamber.>
6) Remove the generator. <Ref. to SC(H4SO 2.0)-
14, REMOVAL, Generator.>
7) Disconnect the connector from throttle body.
8) Disconnect the engine coolant hoses from throt-
tle body.
9) Disconnect the PCV hose.
10) Disconnect the brake booster hose.
11) Disconnect the fuel hose from fuel pipe.
WARNING:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
12) Remove the EGR pipe from EGR valve. (Ex-
cept for KA model)
NOTE:
Be careful not to drop the gaskets.
IN-00203
FU-02487
FU-02114
EC-02021
FU-02115
FU-02116
FU-00547
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст