Subaru Outback (2023 year). Manual in english — page 15
(235,1)
NOTE
A maximum of 5 birthdays can be
stored.
!
Anniversary List
The procedure for setting an anniversary is
the same as “Birthday List”
P232, except
that in step 4 “Anniversary List” is selected.
!
Driver Monitoring System (if
equipped)
The Driver Monitoring System settings can
be changed.
For setting method for the following menu
on the Driver Monitoring System, refer to
“ON/OFF setting”
.
Driver Monitoring System
.
User Recognition
.
Automatically Retract Seat on Entry
Repeat Facial Scan:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Repeat Facial Scan”
6.
?
“OK”
7. While seated in the driver’s seat, face
forward and wait for a few moments. When
the scan is completed, the completion
screen is displayed on the combination
meter (color LCD).
Register User:
1. Adjust the seat position, outside mirror
angle, and reverse tilt-down outside mirror
angle so that you are seated in the correct
driving posture.
NOTE
.
Start the user registration after ad-
justing the seat position, outside mirror
angle, and reverse tilt-down outside
mirror angle. If they are adjusted during
user registration, it may be disrupted.
Refer to “Power Seat”
.
If the ignition switch is turned to the
“OFF” position before user registration
is complete, the information of the
adjusted seat position, outside mirror
angles, and reverse tilt-down outside
mirror angle will not be saved.
2. Touch
(HOME).
3.
?
(Settings)
4.
?
“Car”
5.
?
“Driver Monitoring System”
6.
?
“Register User”
7. Select the preferred user from the list.
– CONTINUED –
Center Information Display (CID)
233
3
Instruments
and
Controls
(236,1)
8.
?
“Set”
9. While seated in the driver’s seat, face
forward and wait for a few moments.
When the screen changes, the registration
of the facial scan is completed.
A)
Forward direction
B)
Display direction
1)
Face forward.
2)
Do not lower your chin.
3)
Face the display.
*: Display
NOTE
.
If user registration cannot be per-
formed, turn your face forward as
shown in the illustration, then turn to
the display.
.
There are some cases where user
registration cannot be registered prop-
erly. In those cases, refer to “Driver
Monitoring System”
.
If “Unable to register. Try again.”
appears, repeat the procedure begin-
ning from step 5.
10. Enter the name.
11.
?
“Next”
Center Information Display (CID)
234
(237,1)
12. Select the preferred icon.
13.
?
“Set”
NOTE
.
An existing user can be overwritten
by selecting a registered number. When
a user is registered by overwriting, the
individual fuel economy data is reset.
.
When “User Recognition” is set to
OFF, user registration cannot be se-
lected.
Update Seat and Mirror Position:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Update Seat and Mirror Position”
6.
?
“Set”
NOTE
.
Start the user registration after ad-
justing the seat position, outside mirror
angle, and reverse tilt-down outside
mirror angle. If they are adjusted during
user registration, it may be disrupted.
Refer to “Power Seat”
.
If the ignition switch is turned to the
“OFF” position before user registration
is complete, the information of the
adjusted seat position, outside mirror
angles, and reverse tilt-down outside
mirror angle will not be saved.
Delete Driver Position:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Delete Driver Position”
6.
?
“Yes”
– CONTINUED –
Center Information Display (CID)
235
3
Instruments
and
Controls
(238,1)
Delete User:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Delete User”
6. Select the preferred user from the list.
7.
?
“Yes”
Delete All Users:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Delete All Users”
6.
?
“Yes”
Center Information Display (CID)
236
(239,1)
!
Car information screen
1. Touch
(HOME) to display the top
menu.
2.
?
(Car Info)
!
Driving Statistics screen
1)
Driving Statistics
2)
Steering angle
3)
Running condition
4)
Vehicle posture
5)
Telltale screen
This screen displays the driving status of
the vehicle and the operation status func-
tions. For functions that are operating, the
indicator will illuminate or flash.
NOTE
.
The vehicle posture indication may
differ from the actual vehicle posture.
.
F o r O u t b a c k / S u b a r u O u t b a c k
Wilderness, when X-MODE has been
turned on, the screen of the center
information display will be changed to
the X-MODE screen.
.
The vehicle posture angle varies not
only due to the angle of the road
surface, but also due to the vehicle tilt
caused by the occupants, cargo, and
acceleration or deceleration.
!
Maintenance screen
Maintenance reminders can be set.
Engine Oil change reminder:
1. Touch “Maintenance” from the 2nd
menu in the car info screen.
2.
?
(Engine Oil)
3. Select “Notification Date” or “Notifica-
tion Distance” of the reminder.
4.
?
“Set”
5.
?
– CONTINUED –
Center Information Display (CID)
237
3
Instruments
and
Controls
(240,1)
Oil Filter change reminder:
The setting procedure is the same as the
“Engine Oil” reminder, but touch the “Oil
Filter” item in step 2.
Tires rotation reminder:
The setting procedure is the same as the
“Engine Oil” reminder, but touch the “Tires”
item in step 2.
Maintenance Schedule setting:
The setting procedure is the same as the
“Engine Oil” reminder, but touch the
“Maintenance Schedule” item in step 2.
NOTE
.
Touch “Reset” to reset each setting.
.
Touch “Update” to revert to the
default value.
&
Dual 7.0-Inch Display Models
(If Equipped)
NOTE
For 11.6-inch display models, refer to
“11.6-Inch Display Models”
!
Main screens
A)
Upper display
B)
Lower display
1)
HOME button (Refer to “HOME button”
2)
Status bar (Refer to “Status bar”
3)
Upper main screen (Refer to “Setting of
the upper display”
4)
Lower main screen (Refer to “Setting of
the lower display”
5)
Climate control screen (Refer to “Climate
control screen”
While the ignition switch is in the “ACC” or
“ON” position, the touch panel will activate.
!
HOME button
Press
(HOME) to display the top menu.
!
Status bar
The driver profiles icon, outside tempera-
ture and clock are shown on the display.
NOTE
.
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following condi-
tions.
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
– When starting the engine after
being parked for a certain period of
time
Center Information Display (CID)
238
(241,1)
.
You can set the temperature units to
be displayed in Celsius (
8
C) or Fahren-
heit (
8
F). For details, refer to “Vehicle
.
The clock can be shown in either 12-
hour display or 24-hour display. For
details about the setting, refer to
“Clock”
.
Touch the clock on the status bar to
display the clock setting screen. Refer
to “Clock”
!
Upper display
For details about items, refer to “Setting of
the upper display”
For details about the following menu, refer
to the separate navigation/audio Owner’s
Manual.
.
Radio
.
Media
.
Phone
.
Apps
.
SUBARU STARLINK
.
Add Shortcut
!
Lower display
For details about the setting items, refer to
“Setting of the lower display”
If this screen changes to the climate
control screen, refer to “Dual 7.0-Inch
Display Models”
!
Climate control screen
1)
Driver’s seat heater icon (if equipped)
2)
Set temperature indicator
3)
Climate control mode
4)
Airflow mode
5)
Air inlet selection
6)
Front passenger’s seat heater icon (if
equipped)
7)
Customizable icon
8)
Fan speed indicator
9)
Climate control On/Off icon
When operating the climate control sys-
tem, the main screen switches to the
climate control screen. For details about
climate control operation, refer to “Climate
Control Panel”
!
Setting of the upper display
In this Owner’s Manual, the settings of the
“General” menu will be explained. For
details about other items, refer to the
separate navigation/audio Owner’s Man-
ual.
!
General settings
The “General” menu is used to set the
display, language and time.
1. Press
(HOME).
2. Touch
(Settings).
3.
?
“General”
4. Select the preferred menu.
– CONTINUED –
Center Information Display (CID)
239
3
Instruments
and
Controls
(242,1)
The setting adjustments to the following items can be manually changed to meet your personal requirements.
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
General
Clock
Time Setting
Sync With Phone/Manual
Clock Format
12H/24H
Display
Display Off
Turn the screen off.
—
Brightness Dial
ON/OFF
—
Brightness/Contrast
Set and adjust the brightness
and contrast of the screen dis-
play and camera display.
—
Reminder Screen
Maintenance
ON/OFF
Birthday
ON/OFF
Anniversary
ON/OFF
Valet Mode
Passcode Setting*
1
Keyboard: Enter New Pass-
code
Activate Valet Mode
Keyboard: Enter Your Pass-
code
Change Passcode
Keyboard: Change Passcode
Meter Screen
Gauge Initial Movement
ON/OFF
Meter Information Screen
Eco Gauge/OUT TEMP/Clock/
Gas Range
Center Information Display (CID)
240
(243,1)
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
General
Camera
Rear Camera Delay Control
ON/OFF
Steering Angle Lines
ON/OFF
Climate Control
Customize Climate Button
A/C/MAX A/C/AUTO/Recircu-
lation
Temperature Unit
8
F/
8
C
—
Language
—
English/Français/Español
and 212
Tire Pressure Units*
2
—
kPa/PSi
Home Screen Shortcuts
—
ON/OFF
*
3
Welcome Screen
—
ON/OFF
Goodbye Screen
—
ON/OFF
Birthday List
—
Set a birthday.
Anniversary List
—
Set an anniversary day.
SUBARU STARLINK Apps Re-
covery
—
OK/Cancel
*
3
—
SUBARU STARLINK Auto
Connect
—
ON/OFF
Factory Data Reset
—
Reset/Cancel
– CONTINUED –
Center Information Display (CID)
241
3
Instruments
and
Controls
(244,1)
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
General
System Information
—
—
*
3
—
Free/Open Source Software
Information
—
—
*1: Displayed until valet mode is set.
*2: If equipped
*3: For details about the audio and navigation system, refer to the Owner’s Manual supplement for the audio and navigation system.
NOTE
Touch
to display the explanation of the items.
Center Information Display (CID)
242
(245,1)
!
Setting of the lower display
Touch
(Car Settings). Refer to “Vehicle
This screen displays the driving status of
the vehicle and the operation status of the
functions. Refer to “Driving Statistics”
Set the timing of the maintenance. Refer to
“Maintenance”
!
Vehicle settings while driving
Touch
(X-MODE),
(Vehicle Control),
(Driving Assistance),
(More Set-
tings), or
(Auto Start Stop) to display
the items that are changeable while driv-
ing.
– CONTINUED –
Center Information Display (CID)
243
3
Instruments
and
Controls
(246,1)
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
X-MODE*
1
—
—
ON/OFF
Vehicle Con-
trol
Vehicle Dynamics Control
—
ON/OFF
Auto Vehicle Hold (AVH)
—
ON/OFF
Cruise Control Acceleration
—
Eco/Comfort/Standard/Dy-
namic
*
2
—
Driving As-
sistance
Pre-Collision Braking
—
Setting ON/Setting OFF
*
2
—
Lane Departure
—
All Functions/Lane Departure
Prevention Function Only/
Warning Buzzer Only/OFF
Auto Start
Stop
—
—
ON/OFF
More Set-
tings
Warning Volume
—
Min/Mid/Max
*
2
Units
—
km, km/h, Liter/
Miles, MPH, Gallon
and 203
Auto Start Stop
—
ON/OFF
*1: For Outback/Subaru Outback Wilderness
*2: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
Center Information Display (CID)
244
(247,1)
!
Auto Start Stop ON/OFF icon
1)
Auto Start Stop indicator (green)
Touching “
” deactivates the Auto Start
Stop system and turns off the Auto Start
Stop indicator (green) on the screen.
Touching “
” again activates the Auto
Start Stop system and turns on the Auto
Start Stop indicator (green). Refer to “To
turn on/off the Auto Start Stop system”
!
Auto Vehicle Hold icon
To turn the Auto Vehicle Hold function on
and off, touch the “Auto Vehicle Hold” icon.
When the Auto Vehicle Hold function is
turned off, the Auto Vehicle Hold indicator
light will turn off.
Refer to “To turn on/off the Auto Vehicle
Hold function”
NOTE
.
When the Auto Vehicle Hold function
is on, the Auto Vehicle Hold indicator
light on the combination meter turns
on. The “Auto Vehicle Hold” indicator
also turns on at the same time.
.
When the Auto Vehicle Hold function
is off, the Auto Vehicle Hold indicator
light on the combination meter turns
off. The “Auto Vehicle Hold” indicator
also turns off at the same time.
!
Vehicle Dynamics Control icon
To turn the Vehicle Dynamics Control on
and off, touch the “Vehicle Dynamics
Control” icon.
When the Vehicle Dynamics Control sys-
tem is turned off during engine operation,
the Vehicle Dynamics Control OFF indica-
tor light on the combination meter illumi-
nates. Refer to “To Turn On/Off the Vehicle
Dynamics Control System”
The Vehicle Dynamics Control system will
be deactivated. When “Vehicle Dynamics
Control” icon has been touched again to
reactivate the Vehicle Dynamics Control
system, the Vehicle Dynamics Control
OFF indicator light turns off.
– CONTINUED –
Center Information Display (CID)
245
3
Instruments
and
Controls
(248,1)
NOTE
.
When Vehicle Dynamics Control is
on, the Vehicle Dynamics Control OFF
indicator light on the combination me-
ter turns off. The “Vehicle Dynamics
Control” indicator turns on at the same
time.
.
When Vehicle Dynamics Control is
off, the Vehicle Dynamics Control OFF
indicator light on the combination me-
ter turns on. The “Vehicle Dynamics
Control” indicator turns off at the same
time.
!
Display Off
Activation of the display off mode:
1. Touch “Display Off”.
Deactivation of the display off mode:
1. Touch the display or push the tem-
perature control button.
2. Press and hold the volume knob to turn
the screen back on.
!
Vehicle setting icons
1. Press
(HOME).
2. Touch
(Car Settings).
Center Information Display (CID)
246
(249,1)
The setting adjustments to the following items can be manually changed to meet your personal requirements.
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
Car Settings
EyeSight
Pre-Collision Braking
Setting ON/Setting OFF
*
1
—
Lane Departure
All Functions/Lane Departure
Prevention Function Only/
Warning Buzzer Only/OFF
*
1
—
Cruise Control Acceleration
Eco/Comfort/Standard/Dy-
namic
*
1
—
Lead Vehicle Acquisition
Sound
ON/OFF
*
1
Lead Vehicle Moving Monitor
ON/OFF
*
1
Select Drive on Left/Drive on
Right
Right Lane/Left Lane
*
1
—
EyeSight Assist Monitor
Red Indicator
ON/OFF
*
1
—
Yellow Indicator
ON/OFF
Green Indicator
ON/OFF
Keyless Entry System
Hazard Warning Flasher
ON/OFF
Audible Signal
ON/OFF
and 137
Defogger
—
15 minutes/Continuous
Interior Light
—
10 seconds/20 seconds/30
seconds/OFF
– CONTINUED –
Center Information Display (CID)
247
3
Instruments
and
Controls
(250,1)
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
Car Settings
Auto Light Sensor
Light Sensitivity
Min/Low/Mid/Max
Wiper Link
ON/OFF
Welcome Lighting
Approaching Time Set
30 seconds/60 seconds/90
seconds/OFF
Leaving Time Set
30 seconds/60 seconds/90
seconds/OFF
One-Touch Lane Changer
—
ON/OFF
Auto Door Lock/Unlock
Auto Door Lock
Vehicle Speed/Shift into or out
of PARK/OFF
Auto Door Unlock
Ignition OFF/Driver Door Open/
Shift into or out of PARK/OFF
Rear Seat Reminder
—
ON/OFF
Vehicle Dynamics Control
—
ON/OFF
Auto Vehicle Hold (AVH)
—
ON/OFF
Auto Start Stop
—
ON/OFF
X-MODE*
2
—
ON/OFF
Warning Volume
—
Min/Mid/Max
*
1
Units
—
km, km/h, Liter/
Miles, MPH, Gallon
and 203
*1: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
*2: If equipped
NOTE
Touch
to display the explanation of the items.
Center Information Display (CID)
248
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст