Subaru Crosstrek (2023 year). Manual in english — page 11
(171,1)
&
Security indicator light
This indicator light shows the status of the
alarm system. It also indicates operation of
the immobilizer system.
!
Alarm system
It blinks to show the driver the operational
status of the alarm system. For detailed
information, refer to “Alarm system”
!
Immobilizer system
The security indicator light starts blinking
in the following conditions.
For models with “keyless access with
push-button start system”:
.
Immediately after the push-button igni-
tion switch is turned to the “OFF” position.
.
Immediately after the driver’s door is
opened or closed when all of the following
conditions are met.
– The push-button ignition switch is in
the “ON” or “ACC” position.
– The engine is not running.
In the event that an unauthorized key is
used (for example, the key is unregistered
or the ID code does not match), the power
is not switched to “ON” and the security
indicator light continues blinking.
For models without “keyless access
with push-button start system”:
.
Immediately after the key is pulled out.
.
Approximately 60 seconds after the
ignition switch is turned from the “ON”
position to the “ACC” or “LOCK” position.
If the indicator light does not blink in the
above conditions, it may indicate that
immobilizer system may be malfunction-
ing. Contact your nearest SUBARU dealer
immediately.
In the event that an unauthorized key (for
example, an unauthorized duplicate) is
used to start the engine, the security
indicator light illuminates. For details about
the immobilizer system, refer to “Immobi-
lizer”
NOTE
.
The security indicator light remains
off in the following conditions. It means
that the matching of the ID code is
completed and the immobilizer system
is deactivated, and it does not indicate
a malfunction.
Models with “keyless access with
push-button start system”:
– While the engine is running
– The push-button ignition switch
has been turned to the “ON” or
“ACC” position and the driver’s
door has not been opened or closed
Models without “keyless access
with push-button start system”:
– While the engine is running
– When the ignition switch is in the
“ON” position
– For approximately 60 seconds
after the ignition switch is turned
from the “ON” position to the “ACC”
or “LOCK” position
.
Even if a malfunction occurs, such
as the security indicator light flashes
irregularly, it will not affect the func-
tionality of the immobilizer system.
– CONTINUED –
Instruments and controls/Warning and indicator
3-29
3
(172,1)
&
SI-DRIVE indicator light (if
equipped)
1)
Intelligent (I) mode indicator
2)
Sport (S) mode indicator
This light indicates the current SI-DRIVE
mode.
For details of SI-DRIVE mode, refer to
“SI-DRIVE”
&
Select lever/gear position in-
dicator
Type A
1)
Gear position indicator
Type B
1)
Upshift indicator
2)
Downshift indicator
3)
Select lever/gear position indicator
This indicator shows the position of the
select lever.
For models with manual mode, when the
manual mode is selected, the gear position
indicator (which shows the current gear
selection) and the upshift/downshift indi-
cator light up. Refer to “Continuously
variable transmission”
Instruments and controls/Warning and indicator
3-30
(173,1)
&
Turn signal indicator
lights
These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to “Replacing bulbs”
&
High beam indicator
light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.
&
High beam assist indi-
cator light (if equipped)
This light illuminates when the high beam
assist function is activated. For details
about the high beam assist function, refer
to “High beam assist function”
&
Cruise control indicator
light (if equipped)
This light illuminates when the cruise
control main button is pressed to activate
the cruise control function. For details,
refer to “To set cruise control”
If this light blinks, do not use the cruise
control. In addition, if it blinks frequently,
contact your SUBARU dealer for an
inspection.
CAUTION
If the CHECK ENGINE warning light/
malfunction indicator light illumi-
nates, the cruise control indicator
light flashes at the same time. At this
time, avoid driving at high speed and
have your vehicle inspected at a
SUBARU dealer as soon as possi-
ble.
&
Cruise control set indi-
cator light (if equipped)
This light illuminates when vehicle speed
has been set to use the cruise control
function. Refer to “To set cruise control”
&
Automatic headlight
beam leveler warning
light (models with LED
headlights)
This light illuminates when the automatic
headlight beam leveler does not operate
normally.
If this light illuminates during driving, have
your vehicle inspected at your SUBARU
dealer.
&
LED headlight warning
light (models with LED
headlights)
This light illuminates if the LED headlights
malfunction. Have your vehicle inspected
at a SUBARU dealer as soon as possible.
&
Steering Responsive
Headlight warning light/
Steering Responsive
Headlight OFF indicator
light (if equipped)
This light illuminates when the Steering
Responsive Headlight OFF switch is
pressed to deactivate the Steering Re-
sponsive Headlight. Also, the light flashes
when a malfunction occurs in the Steering
Responsive Headlight. Refer to “Steering
– CONTINUED –
Instruments and controls/Warning and indicator
3-31
3
(174,1)
&
Front fog light indicator
light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.
&
Headlight indicator
light (if equipped)
This indicator light illuminates under the
following conditions.
.
The light switch is turned to the “
” or
“
” position.
.
The light control switch is in the “AUTO”
position and the headlights illuminate
automatically.
&
Auto Start Stop warning
light/Auto Start Stop
OFF indicator light (yel-
low) (if equipped)
!
Auto Start Stop warning light (yel-
low)
CAUTION
.
If the Auto Start Stop warning
light is flashing in yellow, there
may be a malfunction in the Auto
Start Stop system. We recom-
mend that you have your vehicle
inspected at a SUBARU author-
ized dealer as soon as possible.
.
If the Auto Start Stop warning
light is illuminated in yellow at
any time other than in the follow-
ing cases and will not turn off
even if the Auto Start Stop OFF
switch is pushed and held, we
recommend that you have your
vehicle inspected at a SUBARU
dealer as soon as possible.
The Auto Start Stop warning light will
illuminate in yellow if you open the engine
hood when the engine has been tempora-
rily stopped by the Auto Start Stop system.
In this case, to ensure safety, the engine
will not be automatically restarted, even if
you release the brake pedal. Use normal
operation to restart the engine.
!
Auto Start Stop OFF indicator light
(yellow)
This light will illuminate in yellow when the
Auto Start Stop OFF switch is pressed to
prevent the Auto Start Stop system from
operating. It will turn off when the Auto
Start Stop OFF switch is pressed once
more to enable operation of the Auto Start
Stop system.
&
Auto Start Stop indica-
tor light (green) (if
equipped)
This indicator light illuminates when the
engine has been temporarily stopped by
the Auto Start Stop system. It will turn off
when the engine is restarted.
&
Auto Start Stop No
Activity Detected indi-
cator light (if equipped)
When a vehicle is stopped, the indicator
light illuminates when the operating con-
dition of the Auto Start Stop system is not
met. The light will turn off when the vehicle
starts driving.
Instruments and controls/Warning and indicator
3-32
(175,1)
&
X-MODE indicator (if
equipped)
X-MODE indicator (models with 1 mode)
X-MODE indicator (models with 2 modes)
1)
DEEP SNOW·MUD mode indicator
2)
SNOW·DIRT mode indicator
This indicator appears while the X-MODE
is activated. It will disappear when the
X-MODE is deactivated. Refer to “To
activate/deactivate the X-MODE”
&
Hill descent control in-
dicator (if equipped)
This indicator appears while the hill des-
cent control function is in standby. It will
flash while the hill descent control function
is operating. It will disappear when the hill
descent control function is not available.
Refer to “Hill descent control function”
&
BSD/RCTA warning in-
dicator (if equipped)
This warning indicator appears when the
BSD/RCTA is malfunctioning. In this case
the BSD/RCTA warning indicator will be
shown on the combination meter display
(color LCD). When this indicator appears,
have your vehicle inspected by your
SUBARU dealer as soon as possible.
&
BSD/RCTA OFF indica-
tor (if equipped)
The indicator appears when the BSD/
RCTA OFF switch is pressed to deactivate
the BSD/RCTA, or when the BSD/RCTA is
suspended temporarily. In this case the
BSD/RCTA OFF indicator will be shown on
the combination meter display (color
LCD). For details, refer to “BSD/RCTA”
&
RAB warning indica-
tor (if equipped)
This indicator illuminates if the Reverse
Automatic Braking (RAB) system malfunc-
tions. Refer to “Reverse Automatic Brak-
ing (RAB) system”
– CONTINUED –
Instruments and controls/Warning and indicator
3-33
3
(176,1)
&
RAB OFF indicator (if
equipped)
This indicator illuminates when the Re-
verse Automatic Braking (RAB) system is
turned OFF, or when the Reverse Auto-
matic Braking (RAB) system is suspended
temporarily. Refer to “Reverse Automatic
Braking (RAB) system”
&
Icy road surface warn-
ing indicator (if
equipped)
When the outside temperature is 37
8
F
(3
8
C) or less, the icy road surface warning
will illuminate to inform the driver that the
road surface may be frozen.
NOTE
.
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following condi-
tions.
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
– When starting the engine after
being parked for a certain period of
time
.
The icy road surface warning screen
should be treated only as a guide. Be
sure to check the condition of the road
surface before driving.
.
Once the icy road surface warning
screen appears, it will not disappear
unless the outside temperature has
increased to 41
8
F (5
8
C) or higher.
Combination meter display
(color LCD) (if equipped)
WARNING
Always pay adequate attention to
safe driving when operating the
combination meter display (color
LCD) while the vehicle is in motion.
When operation of the combination
meter display (color LCD) interferes
with your ability to concentrate on
driving, stop the vehicle before
performing operations on the
screen. Also, do not concentrate on
the display while driving. Doing so
may cause you to look away from the
road and could result in an accident.
Various information will be shown on the
combination meter display (color LCD).
Also, a warning message will appear on
the display if a malfunction is detected. In
addition, several settings for the displayed
content can be performed.
Instruments and controls/Combination meter display (color LCD)
3-34
(177,1)
Combination meter display (color LCD)
1)
ECO gauge (Refer to “ECO gauge”
2)
Warning screen (Refer to “Warning
screen”
3-36.)/Basic screen (Refer to
3)
EyeSight screen
4)
Cruise control information display
5)
Telltale screen (Refer to “Telltale screen”
6)
Select lever/gear position indicator (Re-
fer to “Select lever/gear position indica-
tor”
7)
X-MODE indicator (if equipped) (Refer to
“X-MODE indicator”
indicator (if equipped) (Refer to
“SI-DRIVE”
8)
Odometer (Refer to “Odometer”
Double trip meter (Refer to “Double trip
meter”
9)
Fuel gauge (Refer to “Fuel gauge”
A:
Deactivating the EyeSight system or
models without the EyeSight system
B:
Activating the EyeSight system
&
Basic operation
Control switch
1)
(Up)
2)
/SET (Enter)
3)
(Down)
By operating “
” or “
” of the control
switch, the screens and selection items
can be switched. When the “
/SET”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
– CONTINUED –
Instruments and controls/Combination meter display (color LCD)
3-35
3
(178,1)
The warning screen will return to the
original screen after a few seconds. While
the “
” information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with “
” on the display,
pull the “
/SET” switch on the steering
wheel toward you.
NOTE
When the multi-function display (color
LCD) is set to the setting screen, the
combination meter display (color LCD)
cannot be controlled pulling on the
“
”, “
” and “
/SET” on the control
switch.
&
Welcome screen (opening
animation) and Good-bye
screen (ending animation)
When the driver’s door is opened and
closed after unlocking the door, the wel-
come screen (opening animation) will
appear on the combination meter display
(color LCD) for approximately 20 seconds.
When the ignition switch is turned to the
“LOCK”/“OFF” position, the combination
meter display (color LCD) gradually turns
off with showing Good-bye screen (ending
animation).
NOTE
.
The welcome screen and the good-
bye screen may differ in the actual
words and appearance.
.
Once the welcome screen appears, it
takes a certain period of time to display
it again.
.
If the ignition switch is operated
after unlocking the driver’s door, the
welcome screen will not appear even
when the driver’s door is opened and
closed.
.
The welcome screen will disappear
when you lock the driver’s door by
using the remote keyless entry system
(all models) or the keyless access
function (if equipped) while the wel-
come screen is displayed.
.
The welcome screen including the
multi-function display (color LCD) (if
equipped) and the audio/navigation
unit can be set to on or off. For details,
refer to “Welcome Screen”
&
Warning screen
Example of warning
If there is a warning message or a
maintenance notification, it will appear on
this screen. Take the appropriate actions
based on the messages indicated.
Instruments and controls/Combination meter display (color LCD)
3-36
(179,1)
&
Telltale screen
1)
Telltale screen
When the corresponding situation occurs,
the following telltales will be displayed on
the telltale screen.
NOTE
When there is warning information to
display, it will be displayed in five
warning indicators, starting on the left
in ascending order of severity. If there
are six or more warning information
displayed, pull the “
/SET” switch and
check the item.
Mark
Name
Page
Door open warning light
LED headlight warning
light (models with LED
headlights)
High beam assist indi-
cator light (if equipped)
Steering Responsive
Headlight warning light
(if equipped)
Engine low oil level
warning light
RAB warning indicator
(if equipped)
RAB OFF indicator (if
equipped)
BSD/RCTA warning in-
dicator (if equipped)
BSD/RCTA OFF indi-
cator (if equipped)
Automatic headlight
beam leveler warning
light (models with LED
headlights)
Mark
Name
Page
Auto Start Stop warning
light/Auto Start Stop
OFF light (yellow) (if
equipped)
Auto Start Stop No Ac-
tivity Detected indicator
light (if equipped)
Auto Start Stop indica-
tor light (green) (if
equipped)
Windshield washer fluid
warning light
Hill descent control in-
dicator (if equipped)
Icy road surface warn-
ing indicator (if
equipped)
Engine hood open
warning light (if
equipped)
– CONTINUED –
Instruments and controls/Combination meter display (color LCD)
3-37
3
(180,1)
&
Basic screens
By operating the “
” or “
” switch on the
steering wheel, you can change the screen
that is always displayed.
Average fuel consumption screen:
: Average fuel consumption
: Driving range on remaining fuel
This screen displays the average rate of
fuel consumption since the trip meter was
last reset.
NOTE
The driving range on remaining fuel is
only a guide. The indicated value may
differ from the actual driving range on
remaining fuel, so you must immedi-
ately fill the tank when the low fuel
warning light illuminates.
Current fuel consumption screen:
: Current fuel consumption
: Driving range on remaining fuel
This screen displays the rate of fuel
consumption at the present moment.
NOTE
The driving range on remaining fuel is
only a guide. The indicated value may
differ from the actual driving range on
remaining fuel, so you must immedi-
ately fill the tank when the low fuel
warning light illuminates.
Driving information screen:
: Journey time
: Journey distance
This screen displays the journey time (the
time that has elapsed since the ignition
switch was turned to the “ON” position)
and journey distance (the distance that
has been driven since the ignition switch
was turned to the “ON” position).
Instruments and controls/Combination meter display (color LCD)
3-38
(181,1)
Digital speed screen:
1)
Speed limit indicator (if equipped)
2)
Vehicle speed
This screen displays the current vehicle
speed.
Auto Start Stop screen (if equipped):
: The total amount of time that the engine
was stopped by means of the Auto Start
Stop system
: The total amount of fuel saved due to the
engine being stopped by the Auto Start
Stop system
The indicated values are calculated from
the most recent reset of the currently
displayed trip meter to the current time.
The indication ranges are as follows.
.
Total amount of time: from 00
’
00
@
to
9999h59
’
59
@
.
Total amount of fuel saved: from 0 ml to
9999.999 L
NOTE
.
When the trip meter is reset, the
corresponding accumulated time and
the amount of fuel saving are also reset.
.
The time spent with the engine
stopped by means of the Auto Start
Stop system is also added to the
journey time.
SI-DRIVE mode screen (if equipped):
This screen indicates the current
SI-DRIVE mode with its throttle angle.
– CONTINUED –
Instruments and controls/Combination meter display (color LCD)
3-39
3
(182,1)
TPMS screen (U.S.-spec. models):
This screen displays each tire pressure.
When a tire is deflated, the deflated tire
and the tire pressure will be displayed on
the screen in yellow.
NOTE
.
The tire pressure values are dis-
played several minutes after driving.
.
You can set the tire pressure units.
For details about setting the units, refer
to “Tire Pressure Units”
.
Once the tire pressure monitoring
system detects the low tire pressure,
the tire pressure values will display in
yellow until the system detects the
normal tire pressure.
.
Immediately adjust the tire pressure
when the warning light illuminates.
When the tire pressure monitoring
system detects the adjusted tire pres-
sure, the warning light will turn off and
the tire pressure values will turn to
white.
.
For information about the specified
value of the air pressure, refer to
“Tires”
Menu screen entering screen:
While this screen is selected, pull and hold
the “
/SET” switch to enter the menu
screen.
&
Menu screens
Pull and hold the “
/SET” switch to enter
the menu screens when all of the following
conditions are satisfied.
.
The menu screen entering screen is
selected.
.
The “
” information reminder is off.
NOTE
.
While driving, the setting items
available on the combination meter
display (color LCD) are limited.
.
For function settings and adjust-
ments on the combination meter dis-
play, refer to “Function settings and
adjustments on the combination meter
display (color LCD)”
By operating the “
” or “
” switch on the
steering wheel, you can select the menu.
Pull the “
/SET” switch to enter the
selected menu.
NOTE
If you enter the “Go Back” menu, the
system will return to the previous
screen.
!
Screen Settings
After entering the “Screen Settings” menu,
select one of the following menus.
Instruments and controls/Combination meter display (color LCD)
3-40
(183,1)
!
Welcome Screen
The welcome screen can be activated or
deactivated.
!
Good-bye Screen
The good-bye screen can be activated or
deactivated.
!
Gauge Initial Movement
The movement of the meter needles and
gauge needles that occurs when the
ignition switch is turned to the “ON”
position can be activated or deactivated.
!
Units
Changes the units displayed in the combi-
nation meter display (color LCD), the multi-
function display (black and white) and the
multi-function display (color LCD).
!
Tire Pressure Units (if equipped)
Changes the units displayed in the Tire
Pressure Monitoring system.
!
Languages
Changes the language displayed in the
combination meter display (color LCD)
and the multi-function display (color LCD).
!
Warning Volume (if equipped)
Sets the EyeSight warning volume, the
BSD/RCTA warning volume and the Re-
verse Automatic Braking (RAB) warning
volume.
!
Rear Seat Reminder (models with
combination meter display (color
LCD))
The Rear Seat Reminder can be activated
or deactivated.
!
EyeSight (models with EyeSight
system)
NOTE
For models with the EyeSight system,
refer to the Owner’s Manual supple-
ment for the EyeSight system.
!
RAB (if equipped)
The Sonar Audible Alarm can be set to on
or off.
NOTE
For models with Reverse Automatic
Braking (RAB) system, refer to “Re-
verse Automatic Braking (RAB) sys-
tem”
!
Sonar Audible Alarm
When the Reverse Automatic Braking
(RAB) system is in operation, the warning
sound to notify that an obstacle is detected
in the rear can be activated or deactivated.
!
Vehicle Setting
After entering the “Vehicle Setting” menu,
select one of the following menus.
!
Keyless Entry System
Sets the settings used when the keyless
access function was operated.
.
Audible Signal (if equipped)
Sets the electronic chirp that sounds when
the door is locked or unlocked.
.
Hazard Warning Flasher
Sets the operation of the hazard warning
flasher that blinks when the door is locked
or unlocked.
.
Driver Door Unlock (if equipped)
Select only the driver’s door to unlock or all
doors to unlock simultaneously when the
driver’s door is unlocked.
.
Rear Gate/Trunk Unlock (if equipped)
Select only the rear gate to unlock or all
doors to unlock simultaneously when
accessing from the cargo area.
!
Defogger
Sets and customizes the operation of the
defogger.
!
Interior Light
Sets and customizes the interior light off
delay timer.
– CONTINUED –
Instruments and controls/Combination meter display (color LCD)
3-41
3
(184,1)
!
Auto Door Lock and Unlock
Setting conditions for “Auto Door Lock and
Unlock”
.
Auto Door Lock:
Set the condition of the following items to
lock the door automatically.
– Vehicle Speed: When the vehicle
speed reaches more than 12 mph (20
km/h).
– Shift Into or Out of PARK: When the
select lever is shifted into a position
other than the “P” position (CVT
models).
– Off: When the function is set to OFF.
.
Auto Door Unlock:
Set the conditions of the following items to
unlock the door automatically.
– Shift Into or Out of PARK: When the
select lever is shifted into the “P”
position (CVT models).
– Ignition OFF: When the ignition
switch is turned to OFF.
– Driver Door Open: When the dri-
ver’s door is open.
– Off: When the function is set to OFF.
!
Auto Light Sensor (if equipped)
Sets and customizes the sensitivity of the
auto light sensor.
!
Welcome Lighting (if equipped)
Sets the leaving time and approaching
time.
.
Approaching time set
Sets the illumination time of the headlights
that illuminate when you approach the
vehicle.
.
Leaving time set
Sets the time until the headlights turn off
when you have moved away from the
vehicle.
!
One-touch lane changer
Sets the one-touch lane changer on/off.
!
Default Settings
Select “Yes” to use the menu screen to
restore customized settings (except the
“Vehicle Setting” of “Keyless Entry Sys-
tem”, “Defogger”, “Interior Light”, “Auto
Door Lock and Unlock”, “Auto Light Sen-
sor”, “Welcome Lighting” and “One-touch
lane changer”) to the factory default set-
tings. Select “No” to return to the previous
screen without restoring to the factory
default settings.
Multi-function display (black
and white)
NOTE
For models with multi-function display
(color LCD), refer to “Multi-function
display (color LCD)”
Multi-function display (black and white)
1)
Clock
2)
Auto Start Stop system (if equipped)
3)
Outside temperature indicator
4)
Driving information display
5)
Climate control screen
With the ignition switch in the “ACC”
position, the clock appears on the display.
With the ignition switch in the “ON” posi-
tion, the outside temperature indicator,
Instruments and controls/Multi-function display (black and white)
3-42
(185,1)
driving information display and clock all
appear on the display.
NOTE
The indicated values vary in accor-
dance with changes in the vehicle’s
running conditions. Also, the indicated
values may differ slightly from the
actual values and should thus be
treated only as a guide.
&
Driving information display
NOTE
You can set the units for both the multi-
function display (black and white) and
the combination meter at the same
time. For details about setting the
language and units, refer to “Type A
combination meter”
!
How to change the information dis-
play
1)
INFO button
Pressing the INFO button on the steering
wheel switches the display in the following
sequence.
*1: Models without combination meter display
(color LCD)
*2: If equipped
– CONTINUED –
Instruments and controls/Multi-function display (black and white)
3-43
3
(186,1)
!
Driving range on remaining fuel
1)
When setting the displayed unit as MPH
2)
When setting the displayed unit as km/h
The driving range indicates the distance
that can be driven taking into account the
amount of fuel remaining in the tank and
the average rate of fuel consumption.
1)
When setting the displayed unit as MPH
2)
When setting the displayed unit as km/h
If the driving range is shown as “
”, there
is only a tiny amount of fuel left in the tank.
NOTE
The driving range on remaining fuel is
only a guide. The indicated value may
differ from the actual driving range on
remaining fuel, so you must immedi-
ately fill the tank when the low fuel
warning light illuminates.
!
Average fuel consumption
1)
Displays the driving range per gallon of
fuel
2)
Displays the driving range per liter of fuel
3)
Displays the fuel consumption per 100
km
This display shows the average rate of fuel
consumption since the trip meter was last
reset.
Instruments and controls/Multi-function display (black and white)
3-44
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст